similar to: Shorewall prerouting to a manual proxy

Hi all, I have set up a working OpenVPN2 connection between my Server and my gateway at home. Now I want all traffic to be routed through this VPN connection. Currently everything is going through eth1 to the internet (to the gateway of the University which forwards it to the internet :-). We must use a prox-server and because of this I am not abel to watch the real-Media streams on

Hi. I have two internet connections, the ADSL2+ is very very cheap (but fast 10mb) and I want to use the SHDSL (2mb) only for mail,ssh,http OUT and the ADSL2+ only for surfing. I all works fine if people specify the proxy in the browser, but in case like flash it of no use. Further if I can make the 80/443 traffic go through the proxy only, its an added bonus. If this can be done, fine. Bue I

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I mean http://users.gurulink.com/drk/transproxy/TransparentProxy.html on "6. Transparent Proxy to a Remote Box." Thanks - -------- Original Message -------- Subject: Squid on remote Box Date: Wed, 16 Mar 2005 17:16:35 +0700 From: Royke K <royke4k@cbn.net.id> To: shorewall-users@lists.shorewall.net How do I configure port

Hi everybody. We are running Shorewall and Squid on Suse on the same box. Each is working fine independently, but we can''t get them to cooperate. The access log in squid shows no requests when Shorewall is on. Here are all the changes we made in the configuration files. Everything else is the same. We have read through the mailing list and the guide, but still haven''t figured it

I have a server whit 2 interfaces of network, where eth0 is the interfaces connetc to internet and eth1 to the internal network. This server hace a Squid only, but i setting the iptables for protection to the server. Iptables run from script and in this script i setting the redirection for the other server in my internal network to port 80 and 443. I follow the diferent how to and many manual, but

Hello, i have a Samba AD Domain with multiple DC's at the moment all client are connectet to printer via dc2. Is theere a way to connect then in a failover mode? (in other words print via dc1 of dc2 is down) Best Regards Basti

Hello... We have a NT4 Domain in our mainoffice. Now we have to install servers all over germany. (About 20 locations) The offices are connectet over DSL/VPN. We think about using samba to have a stable and inexpensive solution. Is there a solution to use samba over a wide area network? We have alraedy one standalone samba-domain (domain-logons with machine-accounts) in a small office in

My TCP clients connect to box A. I need to forward those connections to a server on box B, such that the original client IPs are visible to the server on B. Each box has two Ethernet ports. One port on each box is connected to WAN, and they are cross-connected in a LAN via remaining ports: ------------------- ------------------- WAN -- |eth0 Box A eth1|---LAN---|eth1 Box

Hi, my ISP is streaming some local concert using UDP multicasting. I followed the instructions on the site which described how to set VLC in order to view the stream, but it didn''t work. I am behind a Linux router/firewall doing NAT. Using google, I quickly found out that the netfilter/conntrack code doesn''t support NATing multicast traffic. I thought about bridging the internet

Only thing i see to do this is setup a clustert print server. I cant tell if its possible with samba. ( sorry ) Greetz, Louis > -----Oorspronkelijk bericht----- > Van: samba [mailto:samba-bounces at lists.samba.org] Namens > basti via samba > Verzonden: woensdag 26 april 2017 16:39 > Aan: samba at lists.samba.org > Onderwerp: Re: [Samba] Samba AD Printer Failover >

Hi, I work on a solution for school including Eyeos and thinclient, iwant to convert syplinux ISO into syplinux Pxeboot, is there a way to do that ? Actually i'm using PXELINUX, When I boot the SYPLINUX.GZ (extract from the iso) I get this error : VFS: Cannit open root device "<NULL>" or unknown-block(3,5) Please append a correct "root=" boot option Kernel panic -

Hi, I am running a ASTERISK BOX behind a firewall. It is at DMZ . Now I want to connect to my ASTERISK BOX from Internet. So I want to DNAT. How can I do it? Pls assume that ip address that connects to Internet on firewall is 1.2.3.4and is attached to eth0. And ASTERISK BOX is 192.168.101.23 Then, What is the rule (PREROUTING) for it? What is the port to DNAT? I think udp 5060. So I have

Hi, I have an DNAT ISSUE with PREROUTING. This is my setup. I have 2 firewalls running iptables. Pls asume 1.2.3.4/29 is the internet interace of FIRST firewall. 2.3.4.5/29 is the internet interface of SECOND firewall. it has DMZ zone. in that DMZ zone, mail server runnig @ 192.168.100.3 Now I want to DNAT port 25 of FISRT firewall (i.e - its ip address - 1.2.3.4/29) to the internet ip

Is there a way to add a rule to the nat table (CentOS 5.7) that would alter the port number of tcp packets destined for the server itself? I have ip_forwarding enabled, but the packets don't seem to hit the prerouting chain. I have the following redirect rule in the prerouting table. I also tried DNAT, but if the packets don't hit PREROUTING, it won't work either. iptables -t nat

Hi, I have an DNAT ISSUE with PREROUTING. This is my setup. I have 2 firewalls running iptables. Pls asume 1.2.3.4/29 is the internet interace of FIRST firewall. 2.3.4.5/29 is the internet interface of SECOND firewall. it has DMZ zone. in that DMZ zone, mail server runnig @ 192.168.100.3 Now I want to DNAT port 25 of FISRT firewall ( i.e - its ip address - 1.2.3.4/29) to the internet ip

I''m trying to setup some DNAT and the packets seem to be disappearing after the PREROUTING step. The packets are coming in eth2 (both LOG targets in iptables and tcpdump confirm this). They are then DNATed to an IP that should cause them to go out eth3. However I never see them go out that interface. I have tried putting LOG rules into the FORWARD chain with no success. I''m

Thanks a lot for the help. But if Asterisk has private IP address and the only way to access it from remote sites is to have vpn connection to the site that asterisk existed (the site has vpn), then how that will happen from the Mobile to be able to run the softphone from the mobile? Any help? Regards Bilal ----------------- I installed out of curiosity today, and guess what? You can do SIP over

---------- Forwarded message ---------- From: Freddy Gamma <freddy.gamma@gmail.com> Date: 2011/1/21 Subject: TRADUCING lmer() syntax into lme() To: r-sig-mixed-models@r-project.org Dear Rsociety, I'd like to kingly ask to anyone is willing to answer me how to implement a NON NESTED random effects structure in lme() In particular I've tried the following translation from lmer to

Hello, I find that samba support several encrypt method. Iwant to disable RC4, where can I set it? My samba version is 4.5.16. Thanks.

AHOI! I've big trouble by setting up CentOS 6.3 for my new vDSL. As I've found out, the German Telekom is using VLAN7 for her internet-(data) connections. => http://workaround.org/blog/vdsl O.K. what I've done: The NIC where's my DSL-modem is connectet is eth0. cat /etc/sysconfig/network-scripts/ifcfg-eth0 # device for vDSL-modem DEVICE=eth0 HWADDR=00:30:1B:14:08:67