similar to: small squid problem

All, Have already got Samba 3 and W2K Ad intergrating working in production without any problems. I have set up a test domain to test W2K3 and Samba3 on a Red Hat 8 server. I did the following: * Have set up the NTP Daemon to synchronize time with the W2K3 domain controller. * installed the latest Kerberos packages for Red Hat 8, maid sure that krb5-workstation is installed. * installed the

Dear member, When I run a code on a computer B from a computer A through shh using for example: system("ssh login at IPadress \"R -e 'print(1)'\"") [Note that I don't need indicate password because ~/.ssh/authorized_keys is used] I get a warning: During startup - Warning message: Setting LC_CTYPE failed, using "C" The code is working (it prints 1)

Hi all, I want to two sip clients connect through Asterisk in local network for testing. My sip.conf file looks like this [general] context=internal allowguest=no allowoverlap=no bindport=5060 bindaddr=0.0.0.0 srvlookup=no disallow=all allow=ulaw alwaysauthreject=yes canreinvite=no nat=yes session-timers=refuse localnet=192.168.1.0/255.255.255.0 [7001] type=friend host=dynamic

I am testing BDD 2007 and WDS on a Windows 2003 Server. I have a PXE Server with tftpd32 and pxelinux boot. Is it possible to have a menu entry that chain the first pxe booting(pxelinux) to the WDS Server which is on a different computer because I can't install WDS on the TFTP pxelinux. I have testing this entry: LABEL TEST WDS kernel ipadress::pxeboot.0 but the first server always respond

Hi, One person, trying to access my website has troubles doing so. All other users do not have a problem. I have a cable modem, with a shorewall 1.4 machine behind it. On the second interface of the shorewall machine I have a few machines, of which one is the webserver. Checking the logfile I see the following messages: Aug 30 21:24:16 gatekeeper kernel: Shorewall:rfc1918:DROP:IN=eth1

Hi, I''m using the XEN 3.4.1-pre4 Hypervisor in Routet Mode and I''m facing some problems when I start the DomU. In detail, it means that the DomU IP-Adress will not be implemented in the Kernel routing table after starting the domU via "xm create /<path +configfle>" After making a "netstat -nr" it will not show the IPadress bound to the

Hi, I have a Debian based NAT router. How can I manage upstream egress bandwidth based on the LAN ipadress in the network below? My goal is that host1 get a minumum of 10Mbit up/down and host2 gets a minimum of 90Mbit up/down, both max 100Mbit up/down? targethost 172.16.255.254 | | 172.16.0.1 natrouter

I use Samba 3.0.2rc2 on Suse 9.0 (heimdal 0.6-68) as a Domainmember for File -and Printservices (about 100 Users). The Linuxbox ist added to the ADS, the User are mapped through winbindd. Everything works.. The I upgraded to Samba 3.0.2 and if I start the daemon, after a while follow Error occured if a Domainclient will connect to the Sambabox: [2004/02/13 13:33:43, 1]

hi guys ! I have following problem (using pxelinux) I can't boot from my harddrive (netboot works just fine) i conwert my IPadress (with gethostip) and create a configfile like this: -----------C0A80001(192.168.0.1)---------- localboot 0 ----------------------end----------------------- at first te client looks for MAC and then for C0A80001 then i get following: Could not find kernel image:

Hi all, -------- I have a Asterisk at a public Network (official IP address). In the local network I have isntalled a Snom 200 IP phone and in my home network (behind NAT) a Snom 100 device. I can dial the Snom200 device from my home location without any problems but the Snom200 can not dial me. It always gets a "we do not rely". I tried to forward the SIP Port (5060) UDP via UPnP

Is is possible to... Restrict all traffic two and from an internal ip address on a specific port? (ie, no port 80 outbound from 192.168.6.50, and block all returning packets to that same ip) Restrict all traffic out to an external ip address on a speicific port? (ie, no port 80 outbound to www.example.com [or its ip]) -- Landy J. Bible The University of Tulsa Computer Science Student IS

We''re using the ListenAddress directive in our sshd_config to tell which interface sshd is supposed to listen on. Normally it''s the address for eth1, but it might be the address for eth0 if there is none for eth1, and it might be both.. So, could someone help me with the erb template for my sshd_config: ListenAddress <%= sshd_listen_address %> The priority should

Hi all, I am trying hard to configure samba, but I can not achieve my goals. Other than standard man pages, I have seen also many posts/documents samba with multiple nics, but I couldn' find any relevant to me. So, please, let me explain my settings and what I am looking to set up. First of all, my desktop runs ubuntu 8.04 with samba 3.0.28a On the pc I have 2 nics, eth0 and eth1. eth1 has

Hello, My samba was working until I changed some configurations in order for it to work with ldap. However, samba won't start now, even after I returned to my old configuration. Here is the error I'm getting: # /etc/init.d/samba restart * Stopping Samba daemons... [ ok ] * Starting Samba daemons... /etc/init.d/samba: line 25: 13064

Hi all, I''ve been using shorewall 3 (3.4.8 now) for a while on a simple gateway setup for my office. Routing is enabled only for a few hosts and all user access the internet thru squid, which is running on the shorewall box. I have a few other services on this box and some others on another server, but they don''t matter for what I need. Quick and dirty schematics to illustrate

Hi, I actually have to install another samba server connected to Active directory by using winbind. All works ok, but i have a little problem. In fact if i use getent |grep user on server1, the output is the following: server1:~# getent |grep user user:*:20083:20040:USER:/home/user:/bin/bash server1:~# on the second one server which use the same AD and the same configuration file exept for

Hi, Most of the samba-commands takes a option for smb.conf file exept for wbinfo. It should be nice to have that functionallity in wbinfo also. /Patrik -- "In a world without fences who needs Gates" Patrik Gustavsson, Senior Technical Consultant patrik.gustavsson@sun.com Telephone: +46 60 671540 http://glen.sweden Mobile: +46 70 3551040 SUN MICROSYSTEMS

Hi! I'd like to provide shared mailboxes with maildir that should appear like 'Shared/<mailboxname>' to the clients. Using the namespace configuration below, everything works fine, exept one thing: Mail clients (only tested with Thunderbird) won't allow to put mails directly in 'Shared/mailboxname' (the folder it is greyed out). You currently have to create

Hi, First sorry for my bad English. I made a vpn wtih tinc for link my home and my two office. In Addition I want to configure my android device to link with my vpn. The topology of the net is this: cubox(a linux machine in my home with vpn address 192.168.0.20) groppalbero (a linux machine in my second office with vpn address 192.168.0.40) imac(a mac machine in my first office with vpn address

Hi guys ! I have a problem and I hope I can get some help here. I want to run a Samba server on a linux firewall machine. This firewall allowa all the udp pachets and also icmp. The firewall blocks all TCP incomming connection exept on port 22 (ssh). I have allowed incomming conection on 137, 138, and 139 (TCP) ports and I stiil get an error message from windows clients. The computer appears