similar to: Re: Two Links and DNAT

HI All , I am running a FC6 box with two internet links with load balance . Every thing is working fine expect the MSN connection that failed and reconnect every time and SSL connections . I would link to know if with the nona howto I could fix that . I have been tried with no success to redirect that connection only to one link but its look like do not work . Here my configuration :

I am setting to a shorewall system with 4 NIC''s as per the outline specification below. Can anyone please have a look and let me know what I have missed and what I have got wrong as I want to take this system live ASAP but do not want to kill internet access and the hosting for too long ! I have listed below the system outline & have attached the config files that I have changed, if

Hi. I´m making an script for load balancing of two cablemodems internet connections toward my LAN. The problem is that when I try to ''equalize'' the the two internet connections with the weight=1 it doesn´t work. On the other hand, if I put 5 and 5 it works, but not at 100%, it does intermittlently, some times works and others don´t. example: ip route add default equalize\

Hi. I´m making an script for load balancing of two cablemodems internet connections toward my LAN. The problem is that when I try to ''equalize'' the the two internet connections with the weight=1 it doesn´t work. On the other hand, if I put 5 and 5 it works, but not at 100%, it does intermittlently, some times works and others don´t. example: ip route add default equalize\

Hi. I´m making an script for load balancing of two cablemodems internet connections toward my LAN. The problem is that when I try to ''equalize'' the the two internet connections with the weight=1 it doesn´t work. On the other hand, if I put 5 and 5 it works, but not at 100%, it does intermittlently, some times works and others don´t. example: ip route add default equalize\

Hello folks: I am trying to set up a router machine to handle all my network connections to the internet and my local network. I have five interfaces in total, three to ISPs (two adsl and one cable) and two interfaces to my local network one to a switch and one wireless card. I have some of the routing working acceptibly but another portion I cannot get working not matter what I''ve

I have a script for dual internet connections that does this: ------------------------- #!/bin/bash IF1=eth1 IP1=203.219.190.106 P1=203.219.190.105 P1_NET=203.219.190.104 IF2=eth2 IP2=220.245.224.46 P2=220.245.224.45 P2_NET=220.245.224.44 IF0=eth0 P0_net=192.168.0.0 TABLE1=inet1 TABLE2=inet2 ip route add $P1_NET dev $IF1 src $IP1 table $TABLE1 ip route add default via $P1 table $TABLE1 ip

Hi! I had two uplinks till today. We stopped one of them today, so i thought i could share my experience. (it is maybe useful for somebody) I hadn''t managed to configure it using a LARTC howto, but the Nano-howto (http://www.ssi.bg/~ja/nano.txt) and julian''s kernel patches. I had some problems with icq connections, because it is a two step connection (It is just theory). 1.

Hi, I have a little problem to setup iproute in my network It looks like this: ---- ----- ------ R1 R2 R3 ---- ----- ------ | | | | | | ------------------------------- ETH1 ETH2 ETH3 ETH0 ETH4 -------------> DMZ ------------------------------ | |

Hi All, I am hoping someone can help me with a project I am doing at work. I warn you in advance that this will be a long post, but I wanted to provide as much information as I could to explain what was going on. Any help would be very much appreciated and welcomed as my boss would like to see this up and running this week. I have been scouring various documents on advanced routing for a

Hi, i''m a shorewall users and i have the following problem: I have one class C range of IP''s and i have three zones (net, dmz , loc) I need create one rule to dnat one valid ip address (but not in use in one computer) to one invalid host in my loc zone. How i do? I try this: DNAT net:200.200.200.200 dmz:200.193.137.38 tcp 137,138,139,445 -

Been running this for quite a while and noticed that have intermittent problems getting out. Find that if I ping the same site from 2 computers it may work on one and fail on the other. Also was surprised that some time they are going out different interfaces at the same time. Seems to work all the time from the firewall. Running 2.6.10 kernel with the multipath routing patches on a debian

Hi, I am trying to categorize the network traffic and to send it out across two different providers. For this I mark the packets in the firewall (in the PREROUTING chain of table mangle), and then use another routing table for the marked packets, which has a different gateway from the main routing table. Basicaly I am following the cookbook example in this page:

Hi guys, I''m not sure where to post for help on this one, shorewall or lvs, I''ll start with shorewall (only cause Tom is a gun at this stuff, and is polite enough to tell me to bugger off to the LVS list if I''m posting in the wrong one ;) I have a single box that is my router/firewall/LVS. Internet -- eth0 - router/firewall - eth1 --- internal lan | eth2

Hi, I''m building a network similar to that seen in 4.2 of the LARTC Howto. There is a diagram of this attached to this mail. Addendum to diagram: AlexRouter br0 = 192.168.58.1 eth0 = dhcpcd DaveRouter br0 = 192.168.58.2 eth0 = dhcpcd But we''ve run into some problems when actually implementing the routing for multiple uplinks. The difference between my

Hi, I''m building a network similar to that seen in 4.2 of the LARTC Howto. There is a diagram of this attached to this mail. Addendum to diagram: AlexRouter br0 = 192.168.58.1 eth0 = dhcpcd DaveRouter br0 = 192.168.58.2 eth0 = dhcpcd But we''ve run into some problems when actually implementing the routing for multiple uplinks. The difference between my

Hey, I''m trying to set up a Gentoo box to replace an aging BSD box here. The BSD box is running packet filter and I have it set up to take all data and route it to one of six sattelites. I have come up with the following config, but unfortunately I have no real way to test it short of switching the satellites over to the new system and prayer. The setup is: 192.168.252/22 - The LAN

Hi everybody, I''m trying to set up routing for 2 links to the internet on a box which produces traffic itself (e.g. DNS) and will route all our local traffic. AS one route is quick and expensive and the other one slow and cheap, I want to be able to route packets for some high-level protocols to the second link. If I correctly understood table 3-2 in

hi, i wann to make multigateway routing and i read ur how to on http://lartc.org/howto/lartc.rpdb.multiple-links.html and create some rules which i am sending u, but with this rules i am not able to do multigateway routing on my linux router so plz help me out. thanks the rules are given below IF0=eth0 IF1=eth1 IF2=eth2 IP1=192.168.1.2 IP2=61.246.243.86 P1=192.168.1.1 P2=61.246.243.81

Hi There, I've been having an issue trying to figure out a way to policy route outbound packets from a multihomed machine through the proper interface using IPFW to no avail. I've tried several different incantations of IPFW fwd/forward statements, and none of them seem to do the trick. Basically, I have a host that has multiple Internet connections. This host is running FreeBSD 4.9