similar to: bridging and internet

Hi Tom and other gurus, I modified SHOREWALL (version 2.0.15) for bridging and I cannot restart it. I got the following error ... Processing /etc/shorewall/policy... Policy ACCEPT for fw to net using chain fw2net Policy REJECT for fw to loc using chain all2all Policy DROP for net to fw using chain net2all Policy ACCEPT for loc to fw using chain loc2fw Policy ACCEPT for loc to net

Hi everybody I have a Problem with Masquerading from my local net (loc) to my VPN (loc2). I can reach every Service from loc2 in loc, but I can''t get reach any service from loc in loc2. Has somebody an Idea where my mistake is ? Without shorewall, it was working. Thanks for helping Lars Technical Information : Shorewall 2.0.13 Suse 9.0 *177.177.77.X The first 3 Counts are changed

Hey folks; I have been happily using shorewall for quite some time so this problem _may_ not be easy to resolve but I am interested in any information regarding your experience with the same setup. I was using FC3 with shorewall 2.2.3 and two NICs setup as a bridge without any issue until I upgraded to FC4. My production system would pass traffic through the bridge but local usage would not

Dear List! I use a shorewall 2.0.8 on a Debian sarge system. I use a DSL connection to the Internet (ppp0 - eth1 to the modem) and a bridge to the local lan. The bridged config i''ve made with bridge.html from the shorewall site. The Bridge is between local net and a openvpn tap device. This works. I ccan make tunnels, and a can make a lot of things through the firewall. I can get a list

Hi, I have a setup that consist of 2 firewalls connected over dialup and PPP. Each side of the ppp are protected by shorewall. One side of the PPP masquerades everything not addressed to the local network to its eth0 (the net). fw1 <---- ppp (dialup) -----> fw0 <----- NET When making an http request to a site on the Internet from the machine not directly connected to the net (fw1), the

Hello! I am using shorewall shorewall-2.0.11-1 on fedora core2 (iptables-1.2.9-95.7). My box has 2 physical nic´s plus one virt. ipsec interface for a freeswan-vpn connection. A few days ago, portsentry spit out a lot of connections from windows clients (port 135, 445). Ooops. I review my shorewall settings but could not find a mistake. So I took a win-client and established a second

Hi, I have a install of shorewall I have 2 interfaces(I think) ppp0[connection device] and eth0 [LAN device], I want to allow all traffic from the the internet in or aleast port 80 and CVS and webmin and mail and everything normal to the main machine with shorewall on it. I changed to policy file but it just gave me errors as to double interfaces. I also what still to alow connection sharing

I''m having a problem with the Shorewall firewall and CUPS printing interfering with each other. My Linux firewall machine is acting as both a CUPS server and client for all of my tests. Shorewall 2.0.13 CUPS 1.1.22-2 Linux kernel 2.6.9 CUPS was working fine to print to my Epson C84 (network connected via a Netgear PS101 print server using lpd://PS101.IP.address/raw ) until I

I have searched your FAQ''s and read the documentation on your site as well as googling. I am not able to figure this out. If you have any ideas can you please help. I am using the linux-ha failover with redundant firewalls. As part of the function of the linux-ha software consists a service called heartbeat which is a connection from each failover node through a serial cable or ethernet.

Hi, Trying to figure out why I cannot get access to dell.com Their site is up because I can browse using a different firewall. Trying to find out where the logs are located and what log files it would write to if it were to deny browsing to a website. I can see the [UNREPLIED] when using the shorewall status. Was hoping to know what logfile it is writing it to. Thanks in advance, Elmer

I''m playing with the rather excellent QOS script from Alexander Clouter at http://digriz.org.uk/jdg-qos-script/ So far I am really impressed with it - a very impressive example of the power of linux QOS rules (has pretty much everything in it from the LARTC Howto!) However, the instructions hint that "for QoS to affect locally generated traffic in a non ethernet bridge setup

I''m attempting to setup Squid as shown on: http://shorewall.sourceforge.net/Shorewall_Squid_Usage.html#DMZ The firewall is a Bering 1.0 firewall running Shorewall 1.3.11, Red Hat 7.2 on the server in the DMZ. I''m not seeing the requests come in to the server using tcpdump. The server is 192.168.2.1 connecting to eth2 on the firewall, the local traffic I''m trying to

I have problem getting answer on http request from all my local subnets but not from local subnet. Ping and requests on ports 21 22 23 25 110 works fine. I logged port 80 in rules files and I got accept entry same for local subnet and other subnets. Local subnet is 192.168.6 Dec 29 09:52:40 zinfsrv2 kernel: Shorewall:loc2fw:ACCEPT:IN=eth0 OUT= MAC=00:09:6b:07:ca:cc:00:10:b5:fa:bd:71:08:00

I have problem with IP public, my Network configuration [wireless] <------> [Router] <------ > [ Linux proxy ] < ------ > [Client ] IP configuration [202.123.123.1] <------->[202.123.123.2 and 192.168.0.1] < ------ > [192.168.0.2 and 202.123.123.3] < ------ > [202.123.123.4] this configuration will use IP 202.123.123.2 on internet how to config my network

Has anybody on this managed to get ChilliSpot and Shorewall to work together? I have managed to get it to work with the supplied firewall script but if I wanted to do my firewall like that I would not be using Shorewall. At any rate, I am having all kinds of trouble translating the supplied rules to something that Shorewall would understand. If anybody has already done it I would love to see the

Hey all, I''m trying to setup roadwarrior connection to my internal network. So I''ve setup openvpn to create a tap0 connection and also have bridged the eth1 (leads to my internal computers 192.168.2.10-30 and tap0 which is the VPN connection. On my shorewall setup I have br0 maped to zone loc and eth0 to be my internet and I have masqing on my br0 to get my internal computers

I have had to replace an existing setup which has a bunch of IPs Proxy-NAT''ed onto the loc segment. While I do eventually want to move them to their own segment, I have to deal with this for the next few weeks. My problem is that from a loc system I can ping the public IP of a system being proxy-ARP''d but I can''t hit it via HTTP. Nothing is being blocked according

Hello, I have the need to connect 2 remote site with vpn, the windows pc of the 2 site it can share the HD and printer. This is my configuration : LOCAL NETWORK A : ip from 192.168.10.2 to 192.168.10.99 | | | | eth0: 192.168.10.1 FIREWALL A : ( with debian ; openvpn ver. 2.0.beta15 ; shorewall ver 2.0.11 ) eth1 : xxx.xxx.xxx.xxx ( pubblic ip address ) | | | | INTERNET | | | eth1 :

Hello List, This is my first post to the list, and as such I apologize for the length of it. I tried to put as much detail into this as possible. I recently installed Shorewall on a computer running Gentoo Linux. The computer has 3 network cards in it, but I''ve only configured 2. Going the cheap route, I''m connecting my client directly to my firewall using a crossover cable.

Dear Shorewall Users :-) I''ve been playing with shorewall for some time now - I found it really interesting and easy tool to organise all the rules and so on (beforethat I''ve been using simple iptables rules in shell script ;-) Generally it''s quite easy to be used, but anyway found one problem which I cannot handle myself - or in other words - cannot find appropriate