similar to: dns strange problem

I have the problem when my localnetwork do telnet to the net Shorewall:FORWARD:REJECT:IN=eth0 OUT=eth2 my files are the following: policy #SOURCE DEST POLICY LOG LEVEL LIMIT:BURST loc net CONTINUE info loc fw ACCEPT info loc loc ACCEPT loc dmz ACCEPT info fw

here''s a snippet from my /var/log/messages: Nov 4 00:24:45 firewall kernel: Shorewall:net2all:DROP:IN=ppp0 OUT= MAC= SRC=80.143.227.136 DST=165.247.174.243 LEN=76 TOS=0x00 PREC=0x00 TTL=114 ID=41910 PROTO=UDP SPT=9940 DPT=9940 LEN=56 Nov 4 00:24:45 firewall kernel: Shorewall:loc2net:DROP:IN=eth0 OUT=ppp0 SRC=10.0.0.2 DST=4.4.130.47 LEN=76 TOS=0x00 PREC=0x00 TTL=127 ID=26091 PROTO=UDP

Does anyone know what this log entry indicates? What service running on a WinNT server would send out a UDP packet with source port 137 and destination port 1? (I was unable to get any clarity from Google...) --------- May 27 11:01:47 ykrgw kernel: Shorewall:loc2net:DROP:IN=eth0 OUT=eth1 SRC=192.168.3.3 DST=166.84.151.198 LEN=84 TOS=0x00 PREC=0x00 TTL=127 ID=37008 PROTO=UDP SPT=137 DPT=1

Hello! I am using shorewall shorewall-2.0.11-1 on fedora core2 (iptables-1.2.9-95.7). My box has 2 physical nic´s plus one virt. ipsec interface for a freeswan-vpn connection. A few days ago, portsentry spit out a lot of connections from windows clients (port 135, 445). Ooops. I review my shorewall settings but could not find a mistake. So I took a win-client and established a second

Dear List! I use a shorewall 2.0.8 on a Debian sarge system. I use a DSL connection to the Internet (ppp0 - eth1 to the modem) and a bridge to the local lan. The bridged config i''ve made with bridge.html from the shorewall site. The Bridge is between local net and a openvpn tap device. This works. I ccan make tunnels, and a can make a lot of things through the firewall. I can get a list

Hi Vene, Would appreciate any help you can give as I am not sure which NAT you are talking about. A little more background. I am replacing a Windows 2000 routing and remote access machine that was acting as the gateway and performing NAT for Internet access for our local clients. In this setup the cisco VPN clients had no problem connecting to the vpn concentrator. The only difference in any

Please, help me. Can i forbid and how any outgoing traffic (ping,trace) to rfc1918 networks on my external interfaces? Thank you very much. Aleksandr -------------------- Продукция AcmePower - это зарядные устройства, аккумуляторы формата АА и ААА, сетевые адаптеры, аккумуляторные батареи для фото и видеокамер, ноутбуков и PDA. Гарантия минского сервисного центра.

I have searched your FAQ''s and read the documentation on your site as well as googling. I am not able to figure this out. If you have any ideas can you please help. I am using the linux-ha failover with redundant firewalls. As part of the function of the linux-ha software consists a service called heartbeat which is a connection from each failover node through a serial cable or ethernet.

I''m having a problem with the Shorewall firewall and CUPS printing interfering with each other. My Linux firewall machine is acting as both a CUPS server and client for all of my tests. Shorewall 2.0.13 CUPS 1.1.22-2 Linux kernel 2.6.9 CUPS was working fine to print to my Epson C84 (network connected via a Netgear PS101 print server using lpd://PS101.IP.address/raw ) until I

I apologize for the first message. :) --------------------------------------- I have an FTP server running in the DMZ section of my home network. It uses port 23000 for connection and ports 19990 to 19994 for data transfer. I have setup the following rule for outside people to connect to it: DNAT net dmz:192.168.2.2 tcp 23000 I''m at work right now and I can''t use

Hi My situation: I have two pc''s with public ip''s (192.159.56.206(webserver) and 84.196.123.65(mail-gateway)) in the dmz. The firewall (84.196.123.66) is configures with proxyarp, so nothing is changed on the pc''s from when they were not behind the firewall (i.e. they don''t have the firewall as gateway (and they each have different gateways, only 84.196.123.65

I have problem getting answer on http request from all my local subnets but not from local subnet. Ping and requests on ports 21 22 23 25 110 works fine. I logged port 80 in rules files and I got accept entry same for local subnet and other subnets. Local subnet is 192.168.6 Dec 29 09:52:40 zinfsrv2 kernel: Shorewall:loc2fw:ACCEPT:IN=eth0 OUT= MAC=00:09:6b:07:ca:cc:00:10:b5:fa:bd:71:08:00

Good day to all. I don''t like to Post unless I am really stuck. Guess what? Redhat with Shorewall. Been using this for years. I have a new client that we have setup with Redhat and Shorewall. The problem is that his outside address (ETH0 = NET) is dynamic (i.e. DHCP enabled). All the rules work fine when we use a STATIC address on Eth0, so we know the rules, filters, tos etc work fine

Hello all, I am a newbie to Linux firewalls, and am trying to setup shorewall to allow connections from an Oracle client to an Oracle Server. The client tries to connect to the server via port 1521 (it works fine) and once the first connection has been successful, the server sends a redirect to the client to a random high port. So, when the client tries to connect again to the sevrer on that port

Hi, I have a install of shorewall I have 2 interfaces(I think) ppp0[connection device] and eth0 [LAN device], I want to allow all traffic from the the internet in or aleast port 80 and CVS and webmin and mail and everything normal to the main machine with shorewall on it. I changed to policy file but it just gave me errors as to double interfaces. I also what still to alow connection sharing

I''m attempting to setup Squid as shown on: http://shorewall.sourceforge.net/Shorewall_Squid_Usage.html#DMZ The firewall is a Bering 1.0 firewall running Shorewall 1.3.11, Red Hat 7.2 on the server in the DMZ. I''m not seeing the requests come in to the server using tcpdump. The server is 192.168.2.1 connecting to eth2 on the firewall, the local traffic I''m trying to

Hi, I have a proxy/firewall, I want to dnat requests for 193.205.140.106 on port 443 towards 10.2.15.23 and requests for 193.205.140.106 on ports 4330 and 3389 towards 10.2.15.25, these rules must apply from internet, loc and fw (some client use a proxy on fw to reach these servers) I have tried with the following rules: DNAT net dmz:10.2.15.23 tcp 443 -

Louis, Tried the rules you suggested: These work. I think that rules out any Windows problems. ufw insert 1 allow in on enp2s5 from 192.168.254.15 to 192.168.254.39 ufw insert 2 allow in on enp2s5 from 192.168.254.39 to 192.168.254.15 These do not work. ufw insert 1 allow in on enp2s5 proto tcp from 192.168.254.0/24 to 192.168.254.39 port 139,445 ufw insert 2 allow in on enp2s5 proto udp from

Hi, I have some problems with shorewall, I got disconnected every 10 minutes.. All the connections stops I am using Shorewall version 2.4.0-RC2 and it is running on debian 3.1r0 I can''t seem to find the problem. I hope you can help me with this. i post my log so that you can maby see where the problem is.(i have filtert some ip addresses) /sbin/shorewall show log Shorewall-2.4.0-RC2

Here's the output: Feb 9 15:51:26 SSI001 kernel: SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=00:0f:ea:73:88:12:00:40:2b:67:5b:a7:08:00 SRC=192.168.1.54 DST=192.168.1.2 LEN=48 TOS=0x00 PREC=0x00 TTL=128 ID=51248 DF PROTO=TCP SPT=1964 DPT=139 WINDOW=65535 RES=0x00 SYN URGP=0 OPT (020405B401010402) Feb 9 15:51:28 SSI001 kernel: SFW2-INext-ACC-TCP IN=eth0 OUT=