similar to: IPSEc versus Multipath routing

I’ve got a problem that I have ignored for a month or 3 J I’m almost certain this is not a Shorewall problem, but I’ll share it anyway ;) I have 2 ISP connection, with load balancing. here’s some routing stuff: rama-kandra root # ip route show 202.37.230.64/26 dev eth2 proto kernel scope link src 202.37.230.93 192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.1

I''ve got a problem that I have ignored for a month or 3 :-) I''m almost certain this is not a Shorewall problem, but I''ll share it anyway ;) I have 2 ISP connection, with load balancing. here''s some routing stuff: rama-kandra root # ip route show 202.37.230.64/26 dev eth2 proto kernel scope link src 202.37.230.93 192.168.1.0/24 dev eth0 proto kernel

Hello Tom and others on the list. Tom - you might recall that the other day (night) I had problems with my axip setup (protocol 93) and we made some changes to the policy, zones and interfaces files. You added ''peers and tunl+'' Following that change nothing seemed to work. In fact you wanted to see the shorewall status file, among other things. Well - tonight, I carefully put

I wonder if someone can tell me what these ''unknown'' remarks mean in my status file. They are only in the last portion of the file and are listed below. If they mean nothing, I will rest easy. But if not it means I need to fix something. Your thoughts would be appreciated. ---------------- udp 17 92 src=24.224.173.220 dst=24.222.0.75 sport=1027 dport=53 src=24.222.0.75

Currently I have shorewal 2.2 installed om my debian 2.6.8 kernel. The firewall machine can access the internet via a ethernet modem fine. The firewall can ping the local network. The local network can ping the firewall server, see the samba files. Howeven teh local network cannot access the internet through the firewall Any suggestions? Rob van Overbruggen Settings and stats: Server: Eth1 :

Hello, I have this problem: when my mail server on the DMZ starts a connection to the internet it''s ip (213.58.230.26) is "masqueraded" with the firewall ip (213.58.230.50). I wouldn''t mind but there is a one customer who rejects the connection because it makes reverse dns and finds no dns entry for the firewall ip. How can i correct this? Thanks, MSantos shorewall

I have what strikes me as an odd problem with shorewall. Let me describe my setup. My desktop (alfred) is connected to the network through an ADSL modem. I am running rp-pppoe, and this works perfectly. I have a small home network, with two LANs; an Ethernet LAN (including a machine running Windows XP), and a WiFi LAN, including the laptop (william) I am using now. All the computers except for

Believe me: Read the FAQ Checked over and over This might be toooooo stupid to be documented. Please bear with me. Any help ? Situation: single card standalone "firewall" (used like a "personal firewall"). Have sshd running on the FW. Want the sshd daemon to be accessible only from 2 LANs: 1) My other home LAN machine 2) IBM intranet machines (9.0.0.0) Whatever I have

Hello All, I have a question about setting up the shorewall firewall for squid, I followed the instructions on "Using Shorewall with Squid" --> "Squid Running in the DMZ" section. For some reason I am unable to get the program to work. I am able to have the squid work properly by using squidclient program, but once I setup the firewall to use the redirect I am unable to

(anonymous post) I have a simple 2 interface firewall setup and all is good, almost. I am hosting virtual websites and DNS behind shorewall no problem. However I am trying to use SFTP via a different port number and have no luck even though Putty works well. Is there anything weird to sftp and shorewall? My lab uses a different firewall (firestarter) and it works OK. I am using; DNAT net

how can I check whether packets are being marked as per my tcrules file? 4 0.0.0.0/0 202.37.230.93 udp 500 4 fw 0.0.0.0/0 udp 500 also can someone confirm what ports are needed to be opened for ipsec? 1701,1723,47,500 ??? P.

Hello All, I am trying to implement OpenVPN on Fedora core Linux 3 with the latest pathces installed. This server is used only as firewall/internet gateway/proxy/VPN server, with kernel 2.6.1-1.27.FC3 and kernel 2.6.1-1.27.FC3 SMP It has two NIC''s eth0 (10.0.0.150) connected to ADSL, eth1 (192.168.3.12) connected to the local network. I use shorewall 2.4 on this machine. I like to test

sorry, i''m confuse where to post my problem.. i was post to shorewall-users, but must read to support.html this''s my problem ----------- i have squid running on DMZ zone and my network using ProxyARP on eth1 and eth2 mylinuxbox slackware 9.2 my network can access to internet normal, but can''t redirect to squid server from firewall. sometimes my network can connect

I have an ADSL router, a linux box with two NICS connected to the router and another PC connected to the router. I installed shorewall using the two interface method. I can ping and see the webserver on the linux box from the local network, but not from the internet. Sys info as follows: [root@wilma root]# shorewall version 1.4.6b [root@wilma root]# ip addr show 1: lo: <LOOPBACK,UP> mtu

Hi, I have a proxy/firewall, I want to dnat requests for 193.205.140.106 on port 443 towards 10.2.15.23 and requests for 193.205.140.106 on ports 4330 and 3389 towards 10.2.15.25, these rules must apply from internet, loc and fw (some client use a proxy on fw to reach these servers) I have tried with the following rules: DNAT net dmz:10.2.15.23 tcp 443 -

(if this post gets line-feed-mangled please read http://www.dl.reneschmidt.de/shorewallxenpost.txt - that''s an unmangled version, thank you) Hello, first I would like to thank the Mr. Eastep and contributors for this great piece of software and superb documentation. I have a SOHO server (Debian testing) that I''m using for several purposes so I''ve set up a Xen

I must have something configured wrong somewhere. I''ve enabled proxy-arp on my shorewall 2.0.7 firewall. Works fine for what its supposed to do, I can see all the machines through it great. However, whenever its enabled, the network on the DMZ goes screwy. I''ve narrowed it down to this: when proxy arp is enabled for that interface, like such: echo 1 >

Hi, I have a big "name problem" with my internal mail server (10.0.0.152). It is "seen" on the internet through DNAT (213.58.230.27). Also there is a MX record pointing to the machine. Everything works fine from the outside. However i can''t set the mail clients on the lan pointing to the mx record, because this one points to 213.58.230.27 and the firewall

Hi, Thanks for your reply . I am attaching the files needed by you herewith. The NAT device is called Pronto gateway which has two interfaces , namely eth0 and eth1. ''eth0'' has an ip address of 203.124.152.66 and eth1 has an ip address of 192.168.1.3 . All the client PCs are in 192.168.1.0 network [behind the NAT, the Pronto gateway] and use 192.168.1.3 as the default

G''day all. I''m trying to set up Clam AV scanning of incoming POP3 email to my Thunderbird mail client; I have a standalone laptop with a 56k dialup connection to my ISP. I can''t seem to get port redirection working: I''m trying to redirect incoming POP3 mail from my ISP''s mail server to p3scan which is listening on 127.0.0.1:8110 and will do the AV