similar to: Problems with Firewall start at Boot time

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I am forwarding your post to the Debian Shorewall maintainer -- none of the code involved in Shorewall startup under Debian is part of the standard Shorewall distribution. - -Tom - -------- Original Message -------- Subject: [Shorewall-users] Problems with Firewall start at Boot time Date: Mon, 06 Sep 2004 16:48:16 -0400 From: Stewart Outram

Hi I am using Shorewall with a bridged Firewall using the "bridging utils" from Debian. eth0 is connected to the router and eth1 is connected to the local lan. eth0 and eth1 are both assigned zero addresses and br0 is assigned the Firewall server address of 192.168.0.1 I should point out that Shorewall is working fine in Bridge mode, but I have hit some problems while evaluating

Hi I have recently reconfigured my system to a Bridge based architecture on the basis that I have an ADSL Modem/Router with a Public address on the Wan side and a Private address on the Lan side. I am running a Debian based system kernel 2.6.7 and the Bridging software is installed and working correctly, including startup etc. The problem that I have is in "shorewall start" The

Hi As per my follow up mail I implemented the ProxyArp configuration as per the Documentation on the Web site and all seemed to be working correctly. However, the one thing that doesn''t seem to be working properly is Samba. I have Samba running on the FW machine and one of the servers 192.168.0.8 on the Local Lan. I can connect to a Share using Samba from Server to Server, however

Hello, I would appreciate any feedback/suggestions on my Shorewall configuration for a standalone laptop Debian Squeeze configuration for ppp0 and wlan0, set out below: ------------------ My current system: ------------------ I have successfuly configured Shorewall 4.4.11.6 on my standalone Debian Squeeze laptop for a ppp0 (Mobile broadband) connection using GNOME PPP, works great (refer to

hello everybody, I'm new here. so, I'm running on SimplyMEPIS 7.0 64-bit, and using a 64-bit Wine 1.0 RC1. I'm having a problem that I had in the past too. certain programs give an error about not being able to access a certain file. I copied the software onto the Linux partition in its whole, data files and all, even ran Wine as root, but to no avail. I have the impression this is

Hi all. Firstly, I apologize if this question has been asked before, which I'm sure it has. I'm only new to Linux although I have been 'dabbling' for awhile now with Ubuntu, Fedora Core 4, SimplyMEPIS, Xandros to name a few. I found Centos 4.1 on the cover disk of the September issue of APC Magazine and thought I'd give it a go. I want to learn linux and thought this one

I downloaded the latest development tree (revision 471), ran configure with the following command: ./configure --with-user=nut --with-drivers=tripplite-hid make The common directory is built normally, then when it tries to make the drivers, I get this error: make[1]: *** No rule to make target `usb.h', needed by `tripplite-hid.o'. Stop. I get this error when I try to build any usb or

Hey! No, actually shorewall works very well and starts and so on... Thanks for this! Problem is that it won''t start on boot it seems. At least it doesn''t enable forwarding. However, if I do /etc/init.d/shorewall restart it enables forwarding and the rest... But not if I do /etc/init.d/shorewall start ;) Seems weird... System is Debian Sid, Shorewall is prepackaged by Debian...

Hi I have recently being doing a lot of rebuilds recently. Whats the best approach to saving a copy of the current firewall settings? I think I am right in my understanding that "Shorewall Save" saves the current settings of Iptables so that the state of Iptables can be reinstated quickly if required, but doesn''t save any of the configuration files like Rules, Policy etc.

Hello, I got the following error message when I executed "make". Can anyone help me on this issue? Thanks! Mike make[1]: Entering directory `/home/zheng/Desktop/wine-0.9.28/tools' make[1]: `makedep' is up to date. make[1]: Leaving directory `/home/zheng/Desktop/wine-0.9.28/tools' make[1]: Entering directory `/home/zheng/Desktop/wine-0.9.28/libs' make[2]: Entering

I'm having a wireless connection issue with an HP laptop and a Zotac media server after the 6.4 package updates from CR repository. Nothing changed with wireless config as far as I can tell. Both have been working fine with previous releases of 6.x. Oddly, if a cat 5 cable is connected for a few seconds and then disconnected the wireless works fine and survives a 'service network

This was an old thread http://lists.digium.com/pipermail/asterisk-users/2007-November/200539.html so I'm starting a new one. Tzafrir Cohen wrote: > On Thu, Nov 15, 2007 at 06:47:04PM +0100, Philipp Kempgen wrote: >> On Debian the Asterisk Makefile does >> >> /usr/sbin/update-rc.d asterisk start 10 2 3 4 5 . stop 91 2 3 4 5 .; >> >> which results in a

Dear all: I fitted "Observed" into a distribution as frequency. The predicted values are calculated as "predicted" for frequency. bins is "x". I plot observed, predicted against x in a graph. the commond is here.

Hello, I have been reading through the documentation and trying to set up a very small VPN as a test for a larger rollout that I would like to complete in the future but cannot get this working. The configuration seems like it should be relatively simple, so I'm most likely missing something basic but I just cannot see what I'm doing wrong. At the moment I am trying to get this working

Hi, I have 2 Debian testing boxes running a very similar setup (both running the latest aptosid kernel); on one of them, since the iptables/libxtables10 packages have been upgraded from 1.4.19.1-1 to 1.4.20-2, shorewall-init can''t start shorewall anymore and for this reason ifupdown also fails triggering firewall up. Shorewall can be successfully started later on, and ifupdown starts

On Mon, Dec 16, 2013 at 04:16:29PM -0800, Michael Dalton wrote: > Commit 2613af0ed18a ("virtio_net: migrate mergeable rx buffers to page frag > allocators") changed the mergeable receive buffer size from PAGE_SIZE to > MTU-size, introducing a single-stream regression for benchmarks with large > average packet size. There is no single optimal buffer size for all >

On Mon, Dec 16, 2013 at 04:16:29PM -0800, Michael Dalton wrote: > Commit 2613af0ed18a ("virtio_net: migrate mergeable rx buffers to page frag > allocators") changed the mergeable receive buffer size from PAGE_SIZE to > MTU-size, introducing a single-stream regression for benchmarks with large > average packet size. There is no single optimal buffer size for all >

Hi I have been trying to get Xen running under Ubuntu. Status ------ I can get Ubuntu to boot on the patched 2.6.10 kernel however :- a) I get several boot errors thus :- Linux version 2.6.11.10-xen0 (root@gateway) (gcc version 3.3.5 (Debian 1:3.3.5-8ubuntu2)) #1 Thu Jun 9 19:58:00 BST 2005 BIOS-provided physical RAM map: Xen: 0000000000000000 - 000000000927c000 (usable) 146MB LOWMEM