similar to: smartd on Centos 4.4

Hi, I've CentOS5 box with 3ware RAID controller in it. I can't get the tw_cli command line tool to work, and smartd also barks on me. The tw_cli simply doesn't see the controller, no errors logged anywhere. When starting smartd, it is much more verbose. I'm getting a bunch of messages like this: Oct 9 22:15:15 toporko kernel: program smartd is using a deprecated SCSI ioctl,

Yohoo! I have some issues with the smartd in CentOS5/x64 I edited the /etc/smartd.conf for my needs and restarted the smartd with "service smartd restart". But the start script is overriding my file. I checked it and saw the following lines: ---------------/etc/init.d/smartd------------ case "$1" in start | reload | restart) GEN_CONF="*SMARTD*AUTOGENERATED*" [ !

last night I checked the log messages on the server Dell PE2950 6xSAS 146G I found the smartd running , I did not request such daemon [root at PowerEdge1 pons]# tail -f /var/log/messages Aug 25 08:27:30 PowerEdge1 smartd[8039]: Home page is http://smartmontools.sourceforge.net/ Aug 25 08:27:30 PowerEdge1 smartd[8039]: Opened configuration file /etc/smartd.conf Aug 25 08:27:30 PowerEdge1

I updated the machine that I use for a web/email server last night to 5.9, and I have this in the logwatch report this morning: QUOTE: --------------------- Smartd Begin ------------------------ Warnings: Device: /dev/sda [SAT], WARNING: There are known problems with these drives, - 1 Time(s) **Unmatched Entries** smartd 5.42 2011-10-20 r3458 [x86_64-linux-2.6.18-348.el5] (local

Hi, I have a software mirror with 2 IDE disks - hda and hdc. I would like to be able to monitor their health using smartd, and I am running /etc/init.d/smartd as a service. I placed the folloing in the /etc/smartd.conf /dev/hda -H -m root /dev/hdc -H -m root I case of a problem I want to be notified by mail, and a message to be logged to the system log. Just want to know if this

Hi All, I don't know enough about when errors are *really* errors. So I google a lot to read and learn. I have a few things in my Logwatch that I want to make sure I understand 1. smartd **Unmatched Entries** Problem creating device name scan list Device /dev/sda: using '-d sat' for ATA disk behind SAT layer. Device /dev/sdb: using '-d sat' for ATA disk behind SAT layer.

I want to install smarmontools v 5.40, and so I pulled the SRPM for 5.39 so I could patch and install... $ wget -Nc ftp://ftp.redhat.com/pub/redhat/linux/enterprise/6Workstation/en/os/SRPMS/smartmontools-5.39.1-2.el6.src.rpm However, the install of the source fails. $ rpm -ivh smartmontools-5.39.1-2.el6.src.rpm warning: smartmontools-5.39.1-2.el6.src.rpm: V3 RSA/MD5 signature: NOKEY, key ID

It seems I can't smarm monitor disks on RAID controllers? I tried on several machines with two different controllers and on all I get this when starting up smartd: Jul 27 14:36:43 c1 smartd[5944]: Opened configuration file /etc/smartd.conf Jul 27 14:36:43 c1 smartd[5944]: Configuration file /etc/smartd.conf parsed. Jul 27 14:36:43 c1 smartd[5944]: Device: /dev/sda, opened Jul 27 14:36:43

I decided, after the last discussion of smartd and S.M.A.R.T. disks, to take a look in my /var/log/messages, and I'm seeing fair bit of this: Sep 10 20:11:23 mhrichter smartd[3361]: Device: /dev/sda, 4294967295 Offline uncorrectable sectors Sep 10 20:41:23 mhrichter smartd[3361]: Device: /dev/hdb, 21 Currently unreadable (pending) sectors Sep 10 20:41:24 mhrichter smartd[3361]: Device:

Hello, I'm using HP homeserver where host system run CentOS 6.3 with KVM virtualization with SELinux enabled, guests too run the same OS (but without SELinux, but this does not matter). Host system installed on mirrors based on sda and sdb physical disks. sd{c..f} disks attached to KVM guest (whole disks, not partitions; needed to use zfs (zfsonlinux) benefit features). Problem is that disks

I notice that the smartd service is not running by default on a new installation. But palimpsest seems to get updated statistics every so often as when I check the statistics on a drive it says "last updated" some number of minutes ago. So if smartd isn't running, where does palimpsest get its information from and what is updating it? Second question, what would enabling the smartd

I'm running a CentOS 4 and smartd fails to start on boot the centos 4 smartd service doesn't support scsi ? <mailto:denis.machard at enst-bretagne.fr> Denis -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20061128/8f430d4c/attachment-0002.html>

Hello I seem to be getting some messages via email and in var/log/messages as well, i think its a hard drive gone bad but was wondering if anyone has seen something similar to this or would have some ideas if its fixable or not, here are the messages This email was generated by the smartd daemon running on: host name: localhost.localdomain DNS domain: localdomain NIS domain: (none)

I'm not used to using smartd, but have a new set of systems that don't have any sort of RAID on them, so I enabled smartd (18 systems 4 SATA drives each). Running CentOS 5.4 64-bit .. One of them has emailed me twice(despite it saying it would only email me once) saying it has 1 Offline uncorrectable sectors But when I try to find more information, smartctl seems to think everything is

Hello, I've got a centos 5 machine running the latest cups rpm v1.2.4. I've included my config minus comments below. My problem is via a web browser i can access the / resource without a problem, but when either clicking on any admin function or direct browsing to an admin address /admin i get a message error 426 upgrade required and i'm told i have to connect to an https address

I have a system that is logging: smartd /dev/sda currently unreadble (pending) sectors smartd /dev/sda offline uncorrectable sectors The box continues to run fine. Doing "smartctl -H /dev/sda" says: test result: PASSED I have ran the "smartctl -t offline /dev/sda", after the 300+ seconds I rebooted and waited about 30 minutes and again got the above error, and smartctl -H

We have about 50 CentOS servers with software RAID level 1 (mirroring). Each week, we swap out one of the drives (the one in the second of four hot-swap bays, only the first two of which contain drives) on each server and take them offsite for safekeeping. The problem is, the kernel seemingly randomly switches between /dev/sdb and /dev/sdc for these devices. This makes the process slower by

I'm looking to do a bit more monitoring of my 3ware 9550 with smartd, and wanted to see what others were doing with smart for monitoring 3ware hardware. Do you have the smartd.conf configured to test, or simply monitor health status? Are you monitoring the drive as centos sees it (/dev/sdX) or are you using the 3ware /dev/twaX for monitoring? Opinions and discussions are welcome :-P --

Yes, I thought all of those things too. Spent a good part of yesterday eliminating them as the cause. top and iotop do not show any issues. No spam filtering on this box (it?s a separate server/software). Drive is 1/3 full. No smart errors. The queue problem (and I don?t know why this isn?t handled better) turned out to be a couple of corrupted messages in the queue. Had about 400 messages

Den 15.11.2018 21:00, skrev StarionTech (IMAP): > Been moving along just fine for a couple years now, then in the last two days, email has slowed to a crawl. > > Retrieving email via IMAP is very slow, progress bar in the mail client shows that it is downloading messages almost constantly, like it never closes the connection, or it?s getting the messages very slowly. The server that