similar to: Appreciate help with Shorewall and VPN

Hello, Despite of reading a lot of descriptions I don''t understand the network configuration. I simply have too little experience. I work remote with the machine via ssh. My dom0 is running. I copied an existing installation into a LV and created the following file: # cat /etc/xen/domu-sarge # -*- mode: python; -*- kernel = "/boot/vmlinuz-2.6.18-4-xen-686" #kernel =

Hi all, I have set up a working OpenVPN2 connection between my Server and my gateway at home. Now I want all traffic to be routed through this VPN connection. Currently everything is going through eth1 to the internet (to the gateway of the University which forwards it to the internet :-). We must use a prox-server and because of this I am not abel to watch the real-Media streams on

Hi, I''m using Xen 3.0.3 on two servers with Debian Etch (amd64). These servers have 10 nics (2 onboard and 8 in two 4-port cards) so that every vm can have its own interface. This worked so far with the Xen Version from Etch with a wrapper script wich started 10 bridges at boot time. But now I''ve updated Xen on one of these server to Xen 3.2.0 from backports.org and now the

Hello. I have installed the SuSE Linux 10 XEN kernel but no domU yet. Now I cannot ping to and from dom0. I get lots of ARP broadcasts from dom0 but dom0 seems to ignore ARP answers. When pinging to dom0 it ignores arp requests. This happens regardless xend is running or not. This happens in the xen kernel only, when booting stock kernel all works as expected. What can I do? Robert

xm list reveals the following information... Name Id Mem(MB) CPU State Time(s) Console Domain-0 0 315 0 r---- 2058.1 Domain-1 11 342 0 -b--- 5.2 9611 Domain-2 12 342 0 -b--- 3.9 9612 Xen seems to be working beautifully but I have not yet figured out how to get Domain-0 to ping both Domain-1 and Domain-2,

Hi, i allready searched the archives, but found no message that really helps me. i am running debian etch on dom0 and debian sarge on domU. I had a running setup with debain sarge on dom0 before, but now with etch i can not get networking to work in domU. I use routed networking, but the same seems to happen with bridged networking: eth0 within domU is not brought up. I think it maybe related

Hallo Mailinglist:), i used xen 4.1 with xend xm a while. I compiled the unstable 4.2 today and most thinks run fine :). I have only one big problem, the network for my guestsystems. It don't want to work. Hopefully somebody can help me. In Xen 4.1 i only wrote the following line in my questconfig: vif = [ "bridge=eth0,script=vif-bridge" ] And everything works fine. This does not

hi, i need eth1 for an adsl connection via rp-pppoe (pppd). I was able to hide eth1 in Dom0, but how i use this device in DomU? Do i have to load the 8139too modul, to have eth1 in DomU? cu denny -- Sicherheit verständlich http://www.sides.de GnuPG Key http://pgp.upb.de:11371/pks/lookup?op=get&search=0xAB7D3FE0 _______________________________________________ Xen-users mailing list

Hi, I cannot get my network up in WinXP- and winVISTA-domU''s I need some help, since I got lost in the google-jungle... My system: UBUNTU gutsy gibon-AMD64 on a intel core duo-system. this is my /etc/xen/winxp.cfg: ######### # # Configuration file for the Xen instance debian.qwork.test, created # by xen-tools 3.5 on Sun Mar 16 20:03:26 2008. # # # Kernel + memory size # kernel =

Hello @all, thanks for all the helpfull answers in this mailing list. They helped me compiling a new kernel 2.6.10.11 with Xen 2.0.6 (my first one), setting up a dom0 with RAID, LVM and loop devices for domU, integrating a second network as xen-br1 (I''m calling the /etc/xen/scripts/network script from within /etc/init.d/xend to bring up / down the second bridge.) and bootstrapping

Hi I''m testing around with xen 3.0 snapshot from last week. And i''m now having a problem with a xenbr which is based on a vlan if (dot1q). this is all in dom0 os: debian testing network: tg3 I can start the bridge based on my normal physical eth0 which is working without any problems. My clan without bridge is also working. I can start the bridge based on a vlan if with help

I'm sorry to bother you but I'm stuck I can not make a bridge work for me. My current configuration is: eth0 Link encap:Ethernet Hardware Adresse 00:1d:7d:d1:06:bd inet Adresse:192.168.1.1 Bcast:192.168.1.255 Maske:255.255.255.0 inet6-Adresse: fe80::21d:7dff:fed1:6bd/64 G?ltigkeitsbereich:V according to all what I could find in the net. The following should

hi, Please can someone help on steps/how to setup vpnc client to connect to a remote server. Thanks and Regards. Samson.

Is there a cisco vpn client for linux centso 5 AMD 64 bit? Using google it talks about cisco vpn client but everyplace to download is blocked. I then found a vpnc reference but did not find a 64 bit version. yum install vpnc did nothing.... What is my next step? Jerry

Hi All, I am switching from Fedora20 to CentOS7 since I now run all my Linux development in a VM and I get a more robust feature set (i.e. shared folders with the host that "just work", etc) The only issue I have thus far is VPN connections. Looking at what's installed on my old Fedora install I suspect I need these packages: kde-plasma-nm-vpnc kde-plasma-nm-openvpn

In spite of reading howtos and this mailing list now for several weeks, I am still not able to get the network of my winXP guest connected to the host (opensuse 10.2) or the external network. There are some network interfaces missing on my host (peth0, vif0.0). ifconfig: eth0 Protokoll:Ethernet Hardware Adresse 00:18:8B:B3:1A:AC inet Adresse:192.168.0.66 Bcast:192.168.0.255

Anyone got a resource on setting up a CentOS box to connect to a Cisco PIX 5xx VPN using IPSec? I don't know if it matters but an important part of functionality would be split tunneling, I need to maintain that from the windows side of functionality. Thanks! jlc

Hi; I have Centos 5.3 on my laptop, and i have to use Cisco Vpn Client. I seen NetworkManager is capable using VPN with vpnc client. I installed vpnc package but i cant finde any NetworkManager-vpnc package. So when i try to open vpn connections and configure VPN option i cant seen add button as active. It is passive so i cant add new vpn connection. Pls help. -- Abdullah Teke

What's the best bet for getting vpnc on v5.1? Compile from cource, DAG repo, other repo? Compiled from source I can't seem to get a response from the target. THANKS, Terry -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available URL:

Hi everybody, I have been using Shorewall for quite a while now but I recently stumbled over a new setup that stopped me cold. I don''t know how to proceed: I have an ordinary GNU/Linux box (2.6.11) connected to a nonpublic network with one interface eth0 which gets an IP through DHCP like 172.17.x.y. Traffic is not routed to the Internet in this subnet. In order to connect to the