similar to: (no subject)

I''ve got a problem that I have ignored for a month or 3 :-) I''m almost certain this is not a Shorewall problem, but I''ll share it anyway ;) I have 2 ISP connection, with load balancing. here''s some routing stuff: rama-kandra root # ip route show 202.37.230.64/26 dev eth2 proto kernel scope link src 202.37.230.93 192.168.1.0/24 dev eth0 proto kernel

Firstly I don''t think this is a shorewall problem, but I suspect shorewall might be able to solve it for me. I''ve posted this so far at http://mandrakeusers.org/index.php?showtopic=18942 I''ve stumble upon a problem that has me stumped I have a multipath router using 2.6.8.1 with patches from here http://www.ssi.bg/~ja/#routes basic setup: ___ ISP1

I've been using IPSec and racoon alot lately creating tunnels between FreeBSD machines. Everything works as it should once I've got it running. I do however seem to get delays when one, or both ends of the tunnel drop or are rebooted. On reboot, once the machine starts racoon, it takes two or three minutes for the tunnel to come back up. If I stop and restart racoon, it takes only 60

hello i am trying to set up ipsec in my network, for now just between two hosts, using to use AH & ESP in tunnel mode to get all of packet encrypted. keys are negotiated with racoon. mayby using tunnel mode in this case can seems strange, but i know what i am doing. after setting up everything i have done few tests with ping & tcpdump. but the results are very suprising. bellow is what i

Hi Running racoon on a Freebsd-4.11 machine gives a kernel panic. I am using the racoon from ports directory which comes with the freebsd installation. Steps followed are as shown below: racoon -f /usr/local/etc/racoon/raccon.conf setkey -f ipsec.conf ping -c 1 <ip_of_the_other_gw> The ping will lead into a crash. The crash dump looks like for th ping packet it

Hi all. The IPSec part of the LARTC howto is great, but I''ve hit a problem in 7.3. IPSEC tunnels. The example given is for manual keying: add 10.0.0.216 10.0.0.11 esp 34501 -m tunnel -E 3des-cbc "123456789012123456789012"; How does one setup "tunnel mode" using racoon? Trying to setup an ipsec tunnel between two subnets: 10.10.42.0/24 and 10.1.1.0/24 using a

Hi, I am trying to setup an IPSEC transport between a Windows 2000 box and a FreeBSD server for a customer... Both systems are on live public IP's and packets are not filtered by any intermediate systems or firewalls/routers in between. I have the following setup: Windows 2000 box: 1.1.1.2 FreeBSD Server: 2.2.2.3 (The actual IP's have been changed to above to protect the innocent..)

hi I''m trying to get ipsec working with x509 certificates however I just can''t seem to. I''ve hit a road block and was wondering if someone could help me figure it out. my racoon.conf (I have it mirrored on the connecting machine. path pre_shared_key "/etc/racoon/psk.txt"; path certificate "/etc/certs"; remote anonymous { exchange_mode

Hi all, I am trying to establish a vpn tunnel between one CentOS5 IPSec server and a roadwarrior client, CentOS5 too. Roadwarrior use ipsec-tools version 0.6.5-8 (that comes with CentOS5) and server uses version 0.7 (downloaded from ipsec-tools website). My server configuration is: path include "/etc/racoon"; path certificate "/etc/racoon/certs"; path pre_shared_key

Hi! I''m testing IPSec tunnels, having the following test schemma: Host A - eth0: 192.168.1.67 eth1: 192.168.10.1 Host B - eth0: 192.168.1.254 eth1: 192.168.20.1 I''ve succesfully configured an IPSec tunnel in order to safely communicate from 192.168.10.0/24 (which is obviously behind Host A), and 192.168.20.0/24 (obviously behind Host B) In this test

Buf ... Solved. Problem was that /etc/pam.d/racoon doesn't exists (I found this tip on NetBSD ipsec pages). Simply I have copied /etc/pam.d/passwd to /etc/pam.d/racoon and now all works as expected. Many thanks for your help Ross. Ross S. W. Walker wrote: > > I think it might just use another one like /etc/pam.d/remote > cause I audited the package and it wasn't there.

I've just wrote a lenghty email on Fedora ML as reply to Phillip who seems to be in the same trouble as myself... Found that while searching all mailing list archives and bugzillas I could think off (not really successfully, many people with same problems, no answers other than "works for me" -- glad to hear it works for somebody else, but it would be nice if he/she was a bit

I am trying to get a tunnel from a cisco 1760 with IOS 12.2.15.t13 to a freebsd 4.9 install with racoon. I have package version freebsd-20040408a and internal version 20001216 in my log file. I posted the full racoon and cisco log below my configs. Racoon keeps saying: 2004-07-26 16:24:03: DEBUG: isakmp.c:2295:isakmp_printpacket(): begin. 2004-07-26 16:24:03: DEBUG:

> Message: 2 > Date: Fri, 03 Dec 2004 10:10:35 +1300 > From: Paul <lists@loudas.com> > Subject: [Shorewall-users] another network to add > To: Shorewall List <shorewall-users@lists.shorewall.net> > Message-ID: <41AF84CB.5080304@loudas.com> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > Hi Tom (and others) > encase you

SuSE10.2 Linux Kernel 2.6.18 Patched, Whenever I try to establish a connection raccoon fails giving the following error. Raccoon config ################# remote 67.101.176.*** { exchange_mode main,aggressive; doi ipsec_doi; situation identity_only; my_identifier address; send_cr off; send_cert off; lifetime time 2 min;

how can I check whether packets are being marked as per my tcrules file? 4 0.0.0.0/0 202.37.230.93 udp 500 4 fw 0.0.0.0/0 udp 500 also can someone confirm what ports are needed to be opened for ipsec? 1701,1723,47,500 ??? P.

Hi all :-) I have a problem with my current configuration of ipsec. I''m using ipsec with kernel 2.6 and racoon. I have two computers linked by wireless cards. The first (192.168.1.1 Zeus) is connected to internet through a DSL modem and the second (192.168.1.2 Memphis) is accessing internet through the first. I want with ipsec to encrypt all datas between the two computers. I can

Hi, When a IPSec tunnel is established between two peers, I understand that the "normal" situation is to have in a given moment two SAs, one for each direction of the tunnel. However, in one of my tunnels (peer P1 running GNU/Linux with setkey and racoon; peer P2 is a Cisco router) there is a large number (around 19) of SAs established (this has been observed in P1 with

Dear list, I''m running Shorewall on a dedicated Fedora 7 box. Shorewall is working well as an office DSL router (dynamic IP) with loc and dmz zones. I am now trying to configure IPSec to connect a VPS, "casp", with a static IP to both the firewall and to the loc network behind it. The host to host SA works fine. However, pings from "loc" to "casp" can be

Hi, I'm trying to get IPsec running between 2 FreeBSD (VMware) boxes, using racoon2. spmd and iked start up okay, but I get an error when I try a ping across the tunnel. /var/log/messages shows: May 5 13:52:36 biosa-vm4 iked: [INTERNAL_ERR]: if_spmd.c:726: SLID failed: 550 Operation failed May 5 13:52:36 biosa-vm4 iked: [INTERNAL_ERR]: isakmp.c:647:isakmp_initiate_cont(): 0:172.20.36.55[0]