similar to: traffic shaping on ftp server don''t work

My Internet gateway is using ADSL PPPoE connection with dynamic public IP assigned by ISP. My Internet gateway is Redhat AS3 U2, shorewall 2.0.9 As my ISP provided 4 simultaneous pppoe dailup connection for the same physical adsl line. My linux server can be configured for multiple pppoe connection i.e. ppp0, ppp1, ppp2, ppp3 Is it possible of shorewall to assigned say ppp0''s IP is

I try use setup traffic shaping with Shorewall-4.0.2 and have fault. When i start Shorewall with tc-files configured i get follow messages: ... RTNETLINK answers: No such file or directory We have an error talking to the kernel ERROR: Command "tc filter add dev eth2 parent ffff: protocol ip prio 50 u32 match ip src 0.0.0.0/0 police rate 500kbit burst 10k drop flowid :1" Failed

Hello Shorewall users, I have some questions I am hoping someone can answer. I have searched around the archives but so far I have been unable to find answers. I am trying to configure traffic shaping on my router/firewall box running Shorewall 3.0.5/kernel 2.4.31 and have run into some problems/questions. My basic set up is: 1500/256kbit ADSL (PPPoE/ppp0) -> Shorewall box

Hi Tom, I nearly completed the test and installation related to http://www.shorewall.net/PPTP.htm. However, there is no serious problem when it is operated as it is in the general companies, but there is Client Program for MS-Window that is operated only by Public IP. So I am very concerned about it. I would like to use Internet through Gateway in (B) as local computers in (A) receive Public

Tom wrote : >My advice to you is still the same -- you are going to have to use tcpdump >or ethereal to see what is happening. You have the computer there in front >of you >-- we don''t. So only you are going to be able to solve this. We are not. >From the dump you sent, it looks like many SYN packets are being sent on >ppp0 >and never replied to. So you need to

Version 3.0.5 with the two-devices setup (eth0 - net, eth1 - loc). Kernel 2.4.29 tcdevices, tcrules, and tcclasses are clones of the wondershaper example (http://www.shorewall.net/traffic_shaping.htm) with eth0 replacing ppp. With TC_ENABLED=Internal in shorewall.conf: ---- Validating /etc/shorewall/tcdevices... Validating /etc/shorewall/tcclasses... ERROR: device A seems not to be

hello , i''m currently trying to set-up Traffic Shapping with Shorewall and I have strong feelings that I found a bug. I may be mistaken, but I tried everything and can''t get it to work. I''ve turned ON TC_ENABLED=Yes and CLEAR_TC=Yes when i start shorewall ( shorewall start ), i get this message : Setting up Traffic Control Rules... TC Rule "2 eth1 0.0.0.0/0 tcp

Ok, shaping on Linux is new to me.. so bear with me if i am just stupid. curtain:/etc/shorewall# grep TC shorewall.conf | grep -v ^# TCP_FLAGS_LOG_LEVEL=info TC_ENABLED=Yes CLEAR_TC=Yes TCP_FLAGS_DISPOSITION=DROP curtain:/etc/shorewall# So it should be enabled, right? ---- tcrules ---- 1 eth0 0.0.0.0/0 all 2 eth1 0.0.0.0/0 all 2 eth2 0.0.0.0/0

Hi all, I moved wshaper 1.1 cbq file to tcstart, but none of my tcrules are being observed. The only way I can set the marks is by editing the tcstart file. Is there a way to incorporate for tcstart to read and apply my set marks in tcrules? Thank you, ~Andrew Nady.

Hi, I''m trying to enable ssh (when that works, want to add:pop3s,smtp,web) from the internet to the firewall but it does not work. I managed to DNAT ftp to a host in the loc network (192.168.0.50) successful but I don''t know why SSH: Does not work for me: ACCEPT net fw tcp 22 Works from the loc network: ACCEPT loc fw tcp 22 I have tried also with (no success): AllowSSH

I am trying to apply the new :T flag in tcrules. the man page for this file [1] sayas that if SOURCE is $FW then rules are applied in OUTPUT. this doesn''t seem to work on my setup. I have in tcrules : ------------------------------------------------------------------------ RESTORE:T 0.0.0.0/0 0.0.0.0/0 all - - - 0 CONTINUE:T 0.0.0.0/0 0.0.0.0/0

>Miguel Ángel Domínguez Durán wrote: >> Hello again, >> First, excuse me for my poor english. >> I''m trying now to make bandwith control in a firewall machine running >> Shorewall. This machine is also a bridge using bridge-utils >> bridge-utils-devel. It is a mandrake 10. The configuration is something >> like >> this: >> >>

Hello Shorewall list, I''m a happy Shorewall user since a few years now and everything works fine for me except one thing that I try to implement since a week, the multi-isp. I''ve downloaded the 2.4.0 Stable release yesterday and tried the RC2 since a week. My config is a Debian running a kernel 2.4.27 home made with the CONNMARK.diff patch applied I''m using 2 ISP,

So after reading the traffic control documentation at shorewall.net I am a little confused. I don''t understand how to use the tcrules file. What I would ideally like to do is setup htb on a per user basis (either by IP or MAC address). If anybody has any hints on the best way to do this or is willing to explain the use of tcrules file a little better (how I could mark it per IP or MAC)

hi who can ever help me out with the shaping of torrent traffic? i have a pptp at ppp0 over eth0 (10.0.0.1/8) i would like to shape outgoing traffic of rtorrent on these two interfaces, assume rtorrent is running at port 6999 need 3mbit for ppp0 and 50mbit for eth0 i supposed: [tcclasses] ppp0 1 2mbit 3mbit 1 eth0 2 20mbit 50mbit 2 [tcrules] 1 0.0.0.0/0 0.0.0.0/0 tcp

My telco is moving to feeding me over fiber, breaking out with a media converter to one Ethernet interface. At present, I am retaining the static feed over copper on eth0, and taking the two new feeds via vlans on eth1. I have configured the static IP feed on eth1:790 as vlan 790, and that seems to be fine, and eth1:780 as the PPPOE feed, and brought up PPPOE to give me an IP, that is

Hello, From a user perspective, the simple (tcpri) and complex TC configs offers two rather distinct choices. A user can very well be OK with only using the simple way and that''s very fine. Then again, even in doing so, the more complex config options are available. What is the interplay between the two as far as having some parameters configured in both at the same time ? So far

Hello, Thanks for the great Shorewall which has replaced my hard to maintain home-made scripts. First, what works. Our local network is 10.48.X.X with multiple vlan, each on a dedicated interface. We use Shorewall 4.4.11 from Debian Squeeze. We have a 2 ISP: - isp1 : an optical fiber provider with 10 Mbps. - isp2 : a DSL provider with 15Mbits/1Mbits. We use isp2 as the default outgoing

Just some stuff that was laying around in CVS: 1. Added ''DNAT-'' target. 2. Print policies in ''check'' command. 3. Added CLEAR_TC option. 4. Added SHARED_DIR option. [teastep@wookie Shorewall]$ cat releasenotes.txt This is a minor release of Shorewall that has a couple of new features. New features include: 1) A new ''DNAT-'' action has been

I am a newbie to linux and shorewall. I am reading the shoreall quickstart guides. I am a bit confused about the following statement: ----------- quote -------------- The firewall has two network interfaces. Where Internet connectivity is through a cable or DSL "Modem", the External Interface will be the ethernet adapter that is connected to that "Modem" (e.g., eth0) unless you