similar to: Problems with routing

Hi, in my network are two locally subnets. Now I want to print from one subnet (loc_110) to the other subnet (loc) where a printer server (192.168.111.5) is working. My printer server is from the d-link company. First in "/var/log/messages" was an entry that there was dropped traffic from source 192.168.110.x port 721 to 192.168.111.5 port 515. Ok, now I''ve created a rule,

Hi, I want forward port 21 and 443 to my squid. A simply rule (dnat) didnt help me. My http - port (only 80) will forwarded to my squid. It runs fine. Here I have used the HowTo from Tom and the hints from http://lartc.org/. I want to do the same with port 21 as port 80. My network: Shorewall: eth0 net (192.168.108.1) eth1 dmz (192.168.109.1) eth2 loc (192.168.110.1) eth3 loc1

Hi, I''ve a little problem, I hope so.. First a hint, I haven''t a static IP - Adress and so I used a dyndns Provider. In DMZ runs a sftp server. It should accessible from net. My router is forwarding the traffic from port 22 to the machine in DMZ. Now, in basic installation I have rfc1918-dropping configured by net interface. My problem: If rfc1918 dropping is on I

Hi, I''ve a big problem. Everytime if I used "shorewall" with option status the Server hangs up completly. The way to solve the problem: switch off the computer. Nothing is makeable. The server is in a productiv enviroment and so I can''t test it all the days. Is here anyone who knows this problem ! Mit freundlichen Grüssen Michael Menkhoff ========================

Hi, could you tell me the correctly syntax to lists any ip adresses. For example: EXT1=192.168.111.239 192.168.215.40 and so on. Must there be a ";" or a blank ? Regards Michael Menkhoff Vote for Kerry

What speaks for it and which speaks against it that Firewall and squid run on the same machine? Regards Menki ------------------------------------------------------- All the advantages of Linux Managed Hosting--Without the Cost and Risk! Fully trained technicians. The highest number of Red Hat certifications in the hosting industry. Fanatical Support. Click to learn more

Hi everyone, This is my first post, so apologies if I have not included all details about the issue. I am using a Nokia e71 to connect to a corporate asterisk server and am having issue with dialing. I can dial all extensions and receive all types of incoming calls. I cannot however, dial local phone numbers. When putting the service into debug, it appears that the device does not enter

Hi all, i''m puzzled by a ploblem and I don''t know how to debug it... I have a firewall with 2 gateways, adsl and isdn. Main gateway is via adsl, backup via isdn. I setup 2 table ''adsl'' and ''isdn''. You can find a description below. I made a script to test both tables. That mainly 1. adds an iptables -t mangle -A

Hello newsgroup, I hope somebody with more routing experience then me can help me with the problem I have. The setup is as described below. A dual internet provider routing, multiple local area networks, and a dmz network with one public and one private ip range. I followed the instructions at lartc.org, and so far everything is working. The default route is via

Hello. We are using pxelinux for years to boot Linux via PXE since years. Since EFI is spreading, I changed configuration to be able to boot EFI systems. The "Client": - HP Proliant DL380Gen9 System FW: 1.21 11/03/2014, latest available - NIC used for booting: HP Embedded LOM 331i (Broadcom BCM 5719/ tg3), FW: 5719-v1.38 The Server: - ISC-DHCP with tfpd-hpa running on Debian 6.x -

On Thu, Feb 05, 2015 at 07:02:07PM +0100, Holger Baust wrote: > Hello. > > We are using pxelinux for years to boot Linux via PXE since years. > Since EFI is spreading, I changed configuration to be able to boot EFI > systems. > > The "Client": > - HP Proliant DL380Gen9 System FW: 1.21 11/03/2014, latest available > - NIC used for booting: HP Embedded LOM 331i

hello, samba is setup PDC with ldap client : windows xp pro sp2 server : samba 3.0.20 + openldap 2.2 + squid 2.5stable14 + squidGuard is it possible to create an automatic logon with internet explorer ? perhaps with ntlm_auth, but i can't find the good sentence. thanks.

I recently couldn't connect to a windowXP domain share from a winXP client.(Samba is the PDC) When I attempted to mount the share from the samba server this is the error I got. colin@Alfalfa:~/oakwood$ smbmount //buckwheat/share buckwheat/ Password: 6586: tree connect failed: ERRDOS - ERRnomem (Insufficient server memory to perform the requested function.) colin@Alfalfa:~/oakwood$ smbmount

Although we (the authors of tinc) have done our best to make tinc as secure as possible, an unfortunate combination of encryption and key exchange techniques has created a hole in at least all versions of tinc >= 0.3, including the current CVS version. Exploit: If somebody can intercept the meta protocol to a host that is running a tinc daemon, it is possible to decrypt the passphrase, which

Although we (the authors of tinc) have done our best to make tinc as secure as possible, an unfortunate combination of encryption and key exchange techniques has created a hole in at least all versions of tinc >= 0.3, including the current CVS version. Exploit: If somebody can intercept the meta protocol to a host that is running a tinc daemon, it is possible to decrypt the passphrase, which

Hello. I'm in need of some help to shed some light on a strange problem. The box is running Samba 4.1.7 on FreeBSD 9.2/amd64 and I suspect (though I'm not sure) all troubles started after the upgrade from 4.1.6. The setup is quite simple: no AD, no LDAP, only one server. A command as simple as "smbclient -U user //SERVER/SHARE", if fired up several times in a row on the

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Dear all, I am trying to setup a replicated volume to serve (in a load-balanced setup) static content. Since we are talking about small sized files (thumbnails) that do not take too much space, one ideea is to set that up in RAM (using /dev/shm mountpoint on CentOS). The main problem is that if I define a replicated volume using glusterfs, and I

Hi, When a IPSec tunnel is established between two peers, I understand that the "normal" situation is to have in a given moment two SAs, one for each direction of the tunnel. However, in one of my tunnels (peer P1 running GNU/Linux with setkey and racoon; peer P2 is a Cisco router) there is a large number (around 19) of SAs established (this has been observed in P1 with

Hello, I came across an interesting problem in my home lab a few weeks ago as I'm prepping for my RHCE exam using Michael Jang study guide. I've been at this for days now, and I still can't wrap my head around how two or more virtual networks in default NAT configuration are even allowed to communicate with each other despite what the libvirt documentation said. Here's the

I have a working router (thanks to Julian''s patches and the threads on this site) load balancing over Dual ISP''s. Links for the curious (see router setup below as well) - Necessary Patches - http://www.ssi.bg/~ja/ How to Patch (I use Debian Sarge and downloaded the latest source from kernel.org) - http://www.desktop-linux.net/debkernel.htm Necessary Reading -