similar to: MultipleIP´s in one Zone

Currently I have shorewal 2.2 installed om my debian 2.6.8 kernel. The firewall machine can access the internet via a ethernet modem fine. The firewall can ping the local network. The local network can ping the firewall server, see the samba files. Howeven teh local network cannot access the internet through the firewall Any suggestions? Rob van Overbruggen Settings and stats: Server: Eth1 :

sorry, i''m confuse where to post my problem.. i was post to shorewall-users, but must read to support.html this''s my problem ----------- i have squid running on DMZ zone and my network using ProxyARP on eth1 and eth2 mylinuxbox slackware 9.2 my network can access to internet normal, but can''t redirect to squid server from firewall. sometimes my network can connect

I''m attempting to setup Squid as shown on: http://shorewall.sourceforge.net/Shorewall_Squid_Usage.html#DMZ The firewall is a Bering 1.0 firewall running Shorewall 1.3.11, Red Hat 7.2 on the server in the DMZ. I''m not seeing the requests come in to the server using tcpdump. The server is 192.168.2.1 connecting to eth2 on the firewall, the local traffic I''m trying to

(Sorry, my previous post was sent in HTML format) I am having a hell of a time with shorewall... I have a Dlink DCM202 Cable modem with the Ethernet connected directly to eth0 on the linux box. Then I have a second nic on the linux box connected to a hub for the internal network. I am trying to allow traffic from the internet connect to my FTP and WEB servers on my Winbloze box on the lan.

I wonder if someone can tell me what these ''unknown'' remarks mean in my status file. They are only in the last portion of the file and are listed below. If they mean nothing, I will rest easy. But if not it means I need to fix something. Your thoughts would be appreciated. ---------------- udp 17 92 src=24.224.173.220 dst=24.222.0.75 sport=1027 dport=53 src=24.222.0.75

I must have something configured wrong somewhere. I''ve enabled proxy-arp on my shorewall 2.0.7 firewall. Works fine for what its supposed to do, I can see all the machines through it great. However, whenever its enabled, the network on the DMZ goes screwy. I''ve narrowed it down to this: when proxy arp is enabled for that interface, like such: echo 1 >

Hi, I have a proxy/firewall, I want to dnat requests for 193.205.140.106 on port 443 towards 10.2.15.23 and requests for 193.205.140.106 on ports 4330 and 3389 towards 10.2.15.25, these rules must apply from internet, loc and fw (some client use a proxy on fw to reach these servers) I have tried with the following rules: DNAT net dmz:10.2.15.23 tcp 443 -

Believe me: Read the FAQ Checked over and over This might be toooooo stupid to be documented. Please bear with me. Any help ? Situation: single card standalone "firewall" (used like a "personal firewall"). Have sshd running on the FW. Want the sshd daemon to be accessible only from 2 LANs: 1) My other home LAN machine 2) IBM intranet machines (9.0.0.0) Whatever I have

I have problem getting answer on http request from all my local subnets but not from local subnet. Ping and requests on ports 21 22 23 25 110 works fine. I logged port 80 in rules files and I got accept entry same for local subnet and other subnets. Local subnet is 192.168.6 Dec 29 09:52:40 zinfsrv2 kernel: Shorewall:loc2fw:ACCEPT:IN=eth0 OUT= MAC=00:09:6b:07:ca:cc:00:10:b5:fa:bd:71:08:00

I have an ADSL router, a linux box with two NICS connected to the router and another PC connected to the router. I installed shorewall using the two interface method. I can ping and see the webserver on the linux box from the local network, but not from the internet. Sys info as follows: [root@wilma root]# shorewall version 1.4.6b [root@wilma root]# ip addr show 1: lo: <LOOPBACK,UP> mtu

I have what strikes me as an odd problem with shorewall. Let me describe my setup. My desktop (alfred) is connected to the network through an ADSL modem. I am running rp-pppoe, and this works perfectly. I have a small home network, with two LANs; an Ethernet LAN (including a machine running Windows XP), and a WiFi LAN, including the laptop (william) I am using now. All the computers except for

Hi all, I''m new to shorewall and have been struggling with several problems for several days now. Most of them are solved, but one still persists. The firewall is running on my server under Debian Sarge (Kernel 2.6) I''ve got three network interfaces: ppp0 (DSL Internet) eth1 (lan) ath0 (wlan) eth1 and ath0 are bridged together to br0. The problem is, that Samba (also running

(anonymous post) I have a simple 2 interface firewall setup and all is good, almost. I am hosting virtual websites and DNS behind shorewall no problem. However I am trying to use SFTP via a different port number and have no luck even though Putty works well. Is there anything weird to sftp and shorewall? My lab uses a different firewall (firestarter) and it works OK. I am using; DNAT net

Hi, Trying to figure out why I cannot get access to dell.com Their site is up because I can browse using a different firewall. Trying to find out where the logs are located and what log files it would write to if it were to deny browsing to a website. I can see the [UNREPLIED] when using the shorewall status. Was hoping to know what logfile it is writing it to. Thanks in advance, Elmer

Hello All, I have a question about setting up the shorewall firewall for squid, I followed the instructions on "Using Shorewall with Squid" --> "Squid Running in the DMZ" section. For some reason I am unable to get the program to work. I am able to have the squid work properly by using squidclient program, but once I setup the firewall to use the redirect I am unable to

Hello Tom and others on the list. Tom - you might recall that the other day (night) I had problems with my axip setup (protocol 93) and we made some changes to the policy, zones and interfaces files. You added ''peers and tunl+'' Following that change nothing seemed to work. In fact you wanted to see the shorewall status file, among other things. Well - tonight, I carefully put

Hello all: I''ve got a confusing issue. I had a working shorewall configuration (based on the two interface model) using DNAT for redirection to my HTTP server. The HTTP server is on my inside network (I know - bad juju, but one thing at a time). I changed my configuration this morning to use views in my BIND (named) configuration. Everyone outside the firewall is able to get in

At the current time I am not subscribed to the mailing list. I have a blacklist that I got from www.peerguardian.net that is rather large ( 81 kb). When shorewall start command is issued it takes about 20 mins for it to load. Is this normal or should I do this another way? Also I noticed something very strange with shorewall .. I have cron do a shorewall restart command every 24 hours and

My dcgui-qt (chat/file-sharing program) doesn''t work and I''m pretty sure it''s my firewall settings. dcgui-qt is a direct connect (file sharing & chat) client. According to the FAQ here (http://dcplusplus.sourceforge.net/faq/faq.php) all I should need to do is: ------- #ACTION SOURCE DEST PROTO DEST SOURCE ORIGINAL #

Hi All, Issue: My Syslog logging doesn''t seem to work for REJECT / DROP policies Context: Shorewall version 1.4.4b on a single IP address setup Diagnosis: Default /etc/shorewall/common.def triggers a DROP prior to policy based -j LOG actions For example selected lines (from the generated iptables) ... The net2all policy: a) -A net2all -m state --state RELATED,ESTABLISHED -j ACCEPT