similar to: SuSe 9.1 startup issue

Shoot! Sorry Tom. I thought I replaced your e-mail address with the shorewall list address. I got it working!!! I finally figured out what I was doing wrong. Pays to write down what I want to accomplish versus flying by the seat mof my pants. The ACCEPT+ is G R E A T! Took care of some of my issues along with removing the redirect rule (yeah, yeah...I should have thought it over more

Hello all, i am getting the follwoing hint/error-message during rpm -ivh = shorewall.rpm when installing on my linux systems: insserv: warning, current runlevel(s) of script ''squid'' overwrites = defaults. is this of any relevance?=20 i have squid configured on my boxes... was just wondering if something = wouldnt be working due to this error... thanks, and regards, andy

Ok here are all the information the website said I should include first: [root@residents root]# shorewall version 1.4.8 [root@residents root]# ip addr show 1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 brd 127.255.255.255 scope host lo 2: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 100

Hi all, is it possible configure Shorewall in bridge mode and, in the same box, utilize Squid in transparent mode? I''m triing to do this, but the REDIRECT rule doesn''t work. I''ve already read http://www.shorewall.net/bridge.html to configure the bridge and work fine for me, but when I add the rule for transparent proxy

Hello Group I am trying to set up a demo of Squid at my location to to a person that has proxy ports blocked on his firewall at his location by having him set his IE Browser set to use proxy server 64.42.49.235 port 80. My thinking was to set up a rule in shorewall which redirects port 80 to 3128 as in a local setting. My test server is running rh 7.3, Shorewall 1.3.14 with one interface

First off, I want to say that everyone on this list is great. So heres what I want to do..I have a maclist setup with all my users (roughly 400). There are constantly people leaving (deleting their accounts which removes their MAC address) and registering for internet access ( I have a php webserver that registers them, adds them to the maclist, and allows them on the net). Is there a way to

Hello, I''m not sure if this has been asked before but I would like to ask assistance for this problem I have. I installed gentoo for my firewall/gateway and installed dhcp and shorewall. Currently, I can ssh, ftp, remote desktop connect, ping, etc (anything I can think of) from an internal computer inside my network to an external IP, except I cannot surf the net. I can ssh/ftp to

Hallo, I got a problem (I think it''s not a Problem, I am just to stupid to manage it) Iwant my Server (eth1: addr:10.0.123.1, Local Zone), eth0 is connectet to the Student-Network (addr:172.16.129.106 Mask:255.255.248.0 gateway: 172.16.128.1, Net Zone), to forward all packages from port 80 on local Zone to www-cache.uni-halle.de:3128 (172.16.128.1:3128) because I have to use this

Hi, I followed the instructions in the section "Squid (transparent) Running on the Firewall" on http://www.shorewall.net/Shorewall_Squid_Usage.html to setup Squid transparently on a Linux gateway. My net is as follows: loc subnet --- fw Linux Gateway --- ADSL router 192.168.1.0/24 192.168.1.92 (eth1) WAN.WAN.WAN.2 (gw = WAN.WAN.WAN.WAN (eth0) 192.168.1.92) (gw =

ive got a config thats client -> server ->Dansguardian->Squid -> onward adn I want to transparently redirect web traffic to DG/Squid Not sure where the problem lies - hoping you guys can help me and at least tell me that its NOT my shorewall config heres the configs When I point a browser straight at 3128 or 3129 I get web pages back and the appropriate stuff in the logs . I get a

Hi everyone - I was wondering how do I setup a rule with the following scenario: I have a VPN site-2-site connection setup. Also, on each site I have squid which redirect all local HTTP traffic on 3128. But I have problems when I try to access the other site web server which is 10.50.20.198 from my network setup which is 10.50.30.0/24. I have all other traffic flowing between the two sites

Hi everybody. We are running Shorewall and Squid on Suse on the same box. Each is working fine independently, but we can''t get them to cooperate. The access log in squid shows no requests when Shorewall is on. Here are all the changes we made in the configuration files. Everything else is the same. We have read through the mailing list and the guide, but still haven''t figured it

Hi all, I''ve just built Mandrake 10.1 on a Compaq Deskpro that I''ve built as a router/firewall and am redirecting port 80 outbound to force users through the Content Filter. I''ve run this setup on Mandrake 9.0 and 10.0 without any problems but this time the following happens. Squid is accessed through port 3128 and Dansguardian via 8080. If I set my browser on a

Dear All, Linux Kernel 2.4.20-8 Running Shorewall 2.2.0 ip addr show 1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 brd 127.255.255.255 scope host lo 2: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 100 link/ether 00:48:54:53:82:45 brd ff:ff:ff:ff:ff:ff inet 62.68.254.178/28 brd

The rule: ACCEPT loc $FW::3128 tcp www doesn''t work propertly, the http access does not redirect to squid but directly exit. what''s wrong? Thanks ------- Dario Lesca (d.lesca@ivrea.osra.it) -------------------------------------- @@@@@@@ this is my shorewall-1.2.13 config: #[/etc/shorewall/common.def]-----------------------------------------------

Sorry Tom I''ll get flamed for this. Trying to set up squid parsed by dansguadian. I set in rules to redirect anything going to port80 from wlan0 to go 3128. What else to I need to add to say the start file to get the output from squid back into the iptables chain. Yes I''ve googled and now I''m tottaly confused TIA & HNY Richard

Hi, I want to automate some of the maclist and rule functionality: User connects to the network and gets a DHCP address from the shorewall box. Using squid and redirection, all the user can do is go to a login page on the firewall User logs in correctly to the form on the webpage and a process captures MAC and IP address info from the dhcpd.leases file Once authenticated, a maclist entry and an

Goodday, First my network layout: dsl router (10.0.0.99) | server (eth0 10.0.0.1, eth1 10.0.1.10) | 3 times windows machine (10.0.1.2, 10.0.1.3, 10.0.1.4) (all with proxy settings 10.0.1.10:8080) Now on the server is mandrake 10 installed with shorewall as firewall. And a apache webserver (and no ftp server). When i turned internet sharing on it started squid which added a line in the

Having moved from a "cascading LANs" configuration to two independent LANs on eth0 and eth1, I still get some "state INVALID" for which I am not sure what the cause is. Can somebody help me understand its probable origin? Thanks, Costantino [see attachment]