similar to: host list in /etc/shorewall/hosts: interface ignored

Hi, I''ve set up a bridge which connects two parts of the same subnet with each other. I''ve set up everything as described in the Documentation and it works very nicely. However: I have a problem with adding hosts to zones dynamically. The zone I want to add hosts to is called ''work''. Since only the bridge br0 is defined in /etc/shorewall/interfaces

Hi, it seems not to be possible to add more than one host at once to a zone. So shorewall add br0:eth0:192.168.2.10,eth0:192.168.2.11 work fails, since "br0:eth0:192.168.2.10,eth0" is interpreted as one interface. --snip -- iptables v1.2.9: interface name `eth0:192.168.2.10,eth0'' must be shorter than IFNAMSIZ (15) Try `iptables -h'' or ''iptables

Hi all, I have two servers ZEUS (MASTER - 192.168.2.11) and POSEIDON (SLAVE - 192.168.2.12) with HeartBeat+DRBD+SAMBA installed ; HeartBeat is controlling SAMBA. I have a big partition which are mirrored /share. I moved all important directory on it. For example: # mv /var/lib/samba /share/cluster/varlibsamba # mv /var/cache/samba /share/cluster/varcachesamba and I make a link for each one: # ln

Hello, I am facing some problems in bridged networking. I have successfully created a bridge br0 and added a virtual machine to it. Now the address of virtual machine is 10.1.3.31. I am able to connect to this virtual machine by another computer on same network. The virtual machine is hosting a simple python http server on port 8000, while some other service is running on port 80 When I try

Hello I got about 20 different people using 20 different PC''s in my Lan. Five of them should have unrestricted access to the internet any time of the day. Yet the rest of them should only have access at certain timeframes during the day. Two of them should have no access at all. I am well experienced in writing rules (for the rules file) that make all this possible, yet i was

Hi all, I use CentOS5.x + Xen in production for virtualization. I use it with bridged vlan networks and bonding (active-backup) like that: eth0 eth1 | | ------- | bond0-------bond0.10---------bond0.12 ... | | | | vlanbr10 vlanbr12 dom0 | | ------------- -------------- | |

Hello Everyone, I have gone through a few really good tutorials from the OpenSIPS site, Asterisk resources etc.. The unanswered question (and final piece of our puzzle) is if it's possible to have a register free environment in an OpenSIPS/Asterisk integration. Most approaches have OpenSIPS relay the UA's REGISTER request to Asterisk which has "host=dynamic" set for the

hello i am trying to set up ipsec in my network, for now just between two hosts, using to use AH & ESP in tunnel mode to get all of packet encrypted. keys are negotiated with racoon. mayby using tunnel mode in this case can seems strange, but i know what i am doing. after setting up everything i have done few tests with ping & tcpdump. but the results are very suprising. bellow is what i

Hi Martin, > Does a useful ps command (e.g. ps auxww) show smbd running? What do > the smbd logs say? no, root at ctdb-<HOST>:~# ps auxwww | grep smbd root     13192  0.0  0.0  12780   940 pts/0    S+   13:05   0:00 grep smbd There is no smbd, nmbd is running. Ahh, but the log says: [2019/05/16 11:26:38.702593,  0] ../source3/smbd/server.c:1519(smbd_claim_version)  

Hi, My local server is running CentOS 7. The machine has two NICs and is acting as a gateway. For DHCP and DNS, I'm using Dnsmasq. I have a strange little problem with local hostname resolution. Before going into more details, here's my configuration. [root at nestor:~] # ifconfig enp2s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.0.2 netmask

On Tue, Apr 9, 2013 at 1:22 PM, Bogdan-Andrei Iancu <bogdan at opensips.org>wrote: > ** > Hi Nick, > > The BYE is not properly formed and rejected by script - in the 200 OK of > the INVITE, you can see that your opensips is doing Record-Routing, but the > BYE does not contain the corresponding Route hdr, so SIP routing is > impossible. > > Regards, > >

Hi, I've set a share using samba, connected it to my Active Directory, and now I'm having problems when I copy files into this share. To setup the AD connection I've followed https://wiki.samba.org/index.php/Setting_up_Samba_as_a_Domain_Member, and installed it into my Debian 9 install using APT, after https://wiki.samba.org/index.php/Distribution-specific_Package_Installation. With

Hi Tim, What we did: setting "log level = 10" in smb.conf then exdcute the following command: ------ samba-tool domain backup online --server=addc3 --targetdir=/root -k yes >backup.txt 2>&1 ------ Then we grep for the message with "call_nt_transact_query_security_desc" ------ grep call_nt_transact_query_security_desc backup.txt ------ And got nothing :-( still the

Lorenzo Martignoni at Univesita` degli Studi di Milano in Milan has established a mirror of the Shorewall web site. http://italy.shorewall.net http://cert-it.dico.unimi.it/shorewall Thanks Lorenzo! -Tom -- Tom Eastep \ Nothing is foolproof to a sufficiently talented fool Shoreline, \ http://shorewall.net Washington USA \ teastep@shorewall.net PGP Public Key \

Hello, Is is possible to do "shorewall reject 1.1.1.1 tcp 25" ? So I can dynamically blacklist offensive smtp senders, but only have shorewall reject certain types (smtp) traffic from them? Thanks, Alex Martin http://www.rettc.com

Hello, I've seen various threads on people reporting: step factor 0.000488281 reduced below `minFactor' of 0.000976563 While I know how to set the minFactor, what I'd like to have happen is for nls to return to me, the last or closest fitted parameters before it errors out. In other words, so I don't get convergence, I'd still like to acquire the values of the parameters

I'm trying to set up a new server to replace my previous domain controller/file&print server on my home network. My old server was running Debian/Etch on a 32bit sempron system with two HDs. The new one is running an old 64bit single-core processor and 3 HDs configured into multiple RAID 1 and 5 arrays (/boot as RAID 1 and /, /home, swap and a /backup directory as RAID 5). The new server

Some probably wish v1.2.12-2 out of Debian Woody would just go away, but it''s what I''m using and really don''t wish to upgrade at this time (but will eventually). My needs are rather simple and I''m sure it can handle the job. I''ve read and re-read the FAQs and searched extensively for docs on what my problem might be, but just cannot put my finger

Dear all, I use the Sernet Samba packages in version 4.9.3. I try to do an online-backup of my domain by: samba-tool domain backup online --server=ad2 --targetdir=/root -Uadministrator and I get the following error: Committing SAM database Setting isSynchronized and dsServiceName Cloned domain DOMAIN (SID S-1-5-21-1996849263-3223042488-349429296) ERROR(runtime): uncaught exception -

hi there! unfortunately, we are repeatedly having problems with uninitialized constants in our rails app (v1.1.6), which is running on a mongrel cluster behind apache''s mod_proxy_balancer. ---- snip ---- NameError (uninitialized constant Base): [...] /app/models/image.rb:90:in `subclasses'' /app/models/image.rb:98:in `subclass?''