similar to: `match.call` and dots substitution

I was thrilled to see this in the change log: > match.call() gains an envir argument for specifying the environment from which to retrieve the ... in the call, if any; this environment was wrong (or at least undesirable) when the definition argument was a function. This was an issue I ran into a few years ago.? I ended up writing my own version that allows specification of the environment, but

Hi, S4 method dispatch can be very slow. Would it be reasonable to cache the most recent dispatch, anticipating the next invocation will be on the same type? This would be very helpful in loops. fun0 <- function(x) sapply(x, paste, collapse="+") fun1 <- function(x) { paste <- selectMethod(paste, class(x[[1]])) sapply(x, paste,

Dear list, I have two functions created in the same environment, fun1 and fun2. fun2 is called by fun1, but fun2 should use an object which is created in fun1 fun1 <- function(x) { ifelse(somecondition, bb <- "o", bb <- "*") ## mymatrix is created, then myresult <- apply(mymatrix, 1, fun2) } fun2 <- function(idx) { if (bb == "o) { #

Hello I need some help in figuring Bravington’s debugger out. Ok I have 2 functions, fun1 and fun2 saved in a ASCII file say filename is funs. Fun1 has a loop which calls fun2, fun2 has a loop which fails and I need to find out the value of the variables of the fun2 and fun1 loops at the specific iteration that fails. Both fun1 and fun2 loops will iterate thousands of times so line by line debug

Hi R users: I'm trying to make a function where two of the parameters are functions, but I don't know how to put each set of parameters for each function. What am I missing? I try this code: f2<-function(n=2,nsim=100,fun1=rnorm,par1=list(),fun2=rnorm,par2=list()){ force(fun1) force(fun2) force(n) p1<-unlist(par1) p2<-unlist(par2) force(p1) force(p2)

Dear list, I know I have seen this discussed before but I haven't been successful in searching for "ellipsis", "dots", "..." in the archives. I would like to filter "..." arguments according to their name, and dispatch them to two sub-functions, say fun1 and fun2. I looked at lm() but it seemed more complicated than I need as it modifies the calling

Dear Friends, Let's assume there are three parameters that were passed into fun1. In fun1, we need to modify one para but the remains need to be untouched. And then all parameters were passed into fun2. However, I have failed to achieve it. Please see the following code. ########################################## fun1 <-function(x, y, z=10) {x+y+z;} fun2 <-function(aa, ...) {

Dear list! ? I have question of?'correct function formation'. Which function (fun1 or fun2; see below) is written more correctly? Using ''structure'' as output or creating empty ''data.frame'' and then transform it as output? (fun1 and fun1 is just for illustration). ? Thanks a lot, OV ? code: input <- data.frame(x1 = rnorm(20), x2 = rnorm(20), x3 =

Hello, I'm building a package. My code is stored in foo.R. This code has two functions FUN1 and FUN2. FUN1 calls FUN2. FUN1 is listed in export() under the package NAMESPACE but NOT FUN2. After building the package when I call FUN1 is giving me an error that cannot find FUN2. I solved this by adding FUN2 in the export() NAMESPACE. However, what is puzzling me is that I have other examples

I'm not sure if this is what you want, but simply add ... to the list of arguments for fun1 and fun2 would eliminate the error. Andy From: Hans-Joerg Bibiko > > Dear all, > > I wrote some functions using the special argument '...'. OK, it works. > > But if I call such a function which also called such a > function, then I get an error message about unused

Dear R-users, i have to integrate the following function `fun1` <- function (a, l1, l2) { exp(log(l1) * (a - 1) - l2 * lgamma(a)) } but if l1 is large, i get the "non-finite function value" error, so my idea is to rescale with exp(-l1) `fun2` <- function (a, l1, l2) { exp(log(l1) * (a - 1) - l2 * lgamma(a) - l1) } but it seems this doesn't solve the problem, when

Hi, I have a vector a=c(NA, 3, 4, 4, NA, NA, 3) and I would like to use is.na(a) function to get a vector like this: wy=(1,2,2,2,1,1,2) - you know, this vector create 1 or 2 depends on value in vector "a" This is my short code but something is wrong and I don't know what... for (i in 1:7){ a=c( NA, 3, 4, 4, NA, NA, 3) fun1=function(x){ x=1 print(x) } fun2=function(x){

Hi R-users, I have a function (myfun) that I want to apply to the rows of a matrix. Basically, "myfun" takes the values from the matrix ("exp.des"), which represent the different combinations of my experimental design, and pass them as arguments to some other functions (fun1 and fun2). As I want to replicate the results of fun1 and fun2 a certain number of time (e.g. 5), I

Dear list!   I would like to write a function to transform matrix, which is input argument of a written function. It is easy with new matrix (see below), but my idea is to transform input argument (matrix) of function without any additional matrixes. Here is an example: fun1 <- function(xy) { xy <- cbind(xy[,1], xy[,2], xy[,1] + xy[,2]) return(xy) }   df1 <- matrix(c(1,2,3,1,2,3), ncol =

> On Feb 25, 2015, at 5:35 PM, Benjamin Tyner <btyner at gmail.com> wrote: > > Actually, it depends on the number of cores: Under current semantics, yes. Each 'stream' of function calls is lazily capturing the last value of `i` on that core. Under Luke's proposed semantics (IIUC), the result would be the same (2,4,6,8) for both parallel and serial execution. This is

Hello! Maybe "frame" is not the right term in this context. I explain my problem by example code: fun2 <- function(objName, add) { ## the object "objName" should be increased by "add", ## but the evaluation should be done in the calling function (here: fun1) ## ...... what's the right code?? } fun1 <- function() { x <- 1 fun2("x",

Full_Name: Yi-Xiong Zhou Version: 1.5.1 OS: win2000pro Submission from: (NULL) (64.169.249.42) Update() can not find objects when it is used in a function, which is in turn being called by another function. Here is a R script to show the problem: ######## begin of the test script ########## fun1 <- function() { x <- matrix(rnorm(500), 20,25) y <- rnorm(20) oo <- lm(y~x)

Hello, I know of some various methods out there to utilize multiple processors but am not sure what the best solution would be. First some things to note: I'm running dependent simulations, so direct parallel coding is out (multicore, doSnow, etc). I'm on Windows, and don't know C. I don't plan on learning C or any of the *nix languages. My main concern deals with Multiple

I have stumbled across some behaviour in R that I really can't place, and that makes coding a bit tricky. I know that I can work around it when explicitly checking for missing arguments, but still... I have two functions. I have a first function based on paste ? ? fun1 <- function(x,y){ ? ? ? print(missing(y)) ? ? ? paste(x,'X',sep=y) ? ? } If I try this function without

Dear colleagues, I'm an epidemiologist with no background in programming and just started using R a few weeks ago. I am working on the epidemiology of African sleeping sickness, and am trying to use R to perform a Monte Carlo Markov Chain analysis to estimate three unknown parameters within a model of African sleeping sickness case detection that is mainly informed by actual field programme