similar to: Squid and DMZ (ProxyARP)

I must have something configured wrong somewhere. I''ve enabled proxy-arp on my shorewall 2.0.7 firewall. Works fine for what its supposed to do, I can see all the machines through it great. However, whenever its enabled, the network on the DMZ goes screwy. I''ve narrowed it down to this: when proxy arp is enabled for that interface, like such: echo 1 >

Hi, Trying to figure out why I cannot get access to dell.com Their site is up because I can browse using a different firewall. Trying to find out where the logs are located and what log files it would write to if it were to deny browsing to a website. I can see the [UNREPLIED] when using the shorewall status. Was hoping to know what logfile it is writing it to. Thanks in advance, Elmer

Hello All, I am trying to implement OpenVPN on Fedora core Linux 3 with the latest pathces installed. This server is used only as firewall/internet gateway/proxy/VPN server, with kernel 2.6.1-1.27.FC3 and kernel 2.6.1-1.27.FC3 SMP It has two NIC''s eth0 (10.0.0.150) connected to ADSL, eth1 (192.168.3.12) connected to the local network. I use shorewall 2.4 on this machine. I like to test

I''m attempting to setup Squid as shown on: http://shorewall.sourceforge.net/Shorewall_Squid_Usage.html#DMZ The firewall is a Bering 1.0 firewall running Shorewall 1.3.11, Red Hat 7.2 on the server in the DMZ. I''m not seeing the requests come in to the server using tcpdump. The server is 192.168.2.1 connecting to eth2 on the firewall, the local traffic I''m trying to

sorry, i''m confuse where to post my problem.. i was post to shorewall-users, but must read to support.html this''s my problem ----------- i have squid running on DMZ zone and my network using ProxyARP on eth1 and eth2 mylinuxbox slackware 9.2 my network can access to internet normal, but can''t redirect to squid server from firewall. sometimes my network can connect

Hello, I have this problem: when my mail server on the DMZ starts a connection to the internet it''s ip (213.58.230.26) is "masqueraded" with the firewall ip (213.58.230.50). I wouldn''t mind but there is a one customer who rejects the connection because it makes reverse dns and finds no dns entry for the firewall ip. How can i correct this? Thanks, MSantos shorewall

Hi, I have a proxy/firewall, I want to dnat requests for 193.205.140.106 on port 443 towards 10.2.15.23 and requests for 193.205.140.106 on ports 4330 and 3389 towards 10.2.15.25, these rules must apply from internet, loc and fw (some client use a proxy on fw to reach these servers) I have tried with the following rules: DNAT net dmz:10.2.15.23 tcp 443 -

Hi, Thanks for your reply . I am attaching the files needed by you herewith. The NAT device is called Pronto gateway which has two interfaces , namely eth0 and eth1. ''eth0'' has an ip address of 203.124.152.66 and eth1 has an ip address of 192.168.1.3 . All the client PCs are in 192.168.1.0 network [behind the NAT, the Pronto gateway] and use 192.168.1.3 as the default

Hi, I have a big "name problem" with my internal mail server (10.0.0.152). It is "seen" on the internet through DNAT (213.58.230.27). Also there is a MX record pointing to the machine. Everything works fine from the outside. However i can''t set the mail clients on the lan pointing to the mx record, because this one points to 213.58.230.27 and the firewall

(if this post gets line-feed-mangled please read http://www.dl.reneschmidt.de/shorewallxenpost.txt - that''s an unmangled version, thank you) Hello, first I would like to thank the Mr. Eastep and contributors for this great piece of software and superb documentation. I have a SOHO server (Debian testing) that I''m using for several purposes so I''ve set up a Xen

I wonder if someone can tell me what these ''unknown'' remarks mean in my status file. They are only in the last portion of the file and are listed below. If they mean nothing, I will rest easy. But if not it means I need to fix something. Your thoughts would be appreciated. ---------------- udp 17 92 src=24.224.173.220 dst=24.222.0.75 sport=1027 dport=53 src=24.222.0.75

I have an ADSL router, a linux box with two NICS connected to the router and another PC connected to the router. I installed shorewall using the two interface method. I can ping and see the webserver on the linux box from the local network, but not from the internet. Sys info as follows: [root@wilma root]# shorewall version 1.4.6b [root@wilma root]# ip addr show 1: lo: <LOOPBACK,UP> mtu

Currently I have shorewal 2.2 installed om my debian 2.6.8 kernel. The firewall machine can access the internet via a ethernet modem fine. The firewall can ping the local network. The local network can ping the firewall server, see the samba files. Howeven teh local network cannot access the internet through the firewall Any suggestions? Rob van Overbruggen Settings and stats: Server: Eth1 :

Hi Tom Here is the output of shorewall status Thanks Lars [H[2JShorewall-2.0.13 Status at - Thu Dec 30 21:43:44 CET 2004 Counters reset Thu Dec 30 15:38:17 CET 2004 Chain INPUT (policy DROP 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 38383 11M ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 0 0 DROP !icmp --

Firstly I don''t think this is a shorewall problem, but I suspect shorewall might be able to solve it for me. I''ve posted this so far at http://mandrakeusers.org/index.php?showtopic=18942 I''ve stumble upon a problem that has me stumped I have a multipath router using 2.6.8.1 with patches from here http://www.ssi.bg/~ja/#routes basic setup: ___ ISP1

I have what strikes me as an odd problem with shorewall. Let me describe my setup. My desktop (alfred) is connected to the network through an ADSL modem. I am running rp-pppoe, and this works perfectly. I have a small home network, with two LANs; an Ethernet LAN (including a machine running Windows XP), and a WiFi LAN, including the laptop (william) I am using now. All the computers except for

(Sorry, my previous post was sent in HTML format) I am having a hell of a time with shorewall... I have a Dlink DCM202 Cable modem with the Ethernet connected directly to eth0 on the linux box. Then I have a second nic on the linux box connected to a hub for the internal network. I am trying to allow traffic from the internet connect to my FTP and WEB servers on my Winbloze box on the lan.

Believe me: Read the FAQ Checked over and over This might be toooooo stupid to be documented. Please bear with me. Any help ? Situation: single card standalone "firewall" (used like a "personal firewall"). Have sshd running on the FW. Want the sshd daemon to be accessible only from 2 LANs: 1) My other home LAN machine 2) IBM intranet machines (9.0.0.0) Whatever I have

(anonymous post) I have a simple 2 interface firewall setup and all is good, almost. I am hosting virtual websites and DNS behind shorewall no problem. However I am trying to use SFTP via a different port number and have no luck even though Putty works well. Is there anything weird to sftp and shorewall? My lab uses a different firewall (firestarter) and it works OK. I am using; DNAT net

I have problem getting answer on http request from all my local subnets but not from local subnet. Ping and requests on ports 21 22 23 25 110 works fine. I logged port 80 in rules files and I got accept entry same for local subnet and other subnets. Local subnet is 192.168.6 Dec 29 09:52:40 zinfsrv2 kernel: Shorewall:loc2fw:ACCEPT:IN=eth0 OUT= MAC=00:09:6b:07:ca:cc:00:10:b5:fa:bd:71:08:00