similar to: Unable to do passive ftp after updating to 2.0.9

I apologize for the first message. :) --------------------------------------- I have an FTP server running in the DMZ section of my home network. It uses port 23000 for connection and ports 19990 to 19994 for data transfer. I have setup the following rule for outside people to connect to it: DNAT net dmz:192.168.2.2 tcp 23000 I''m at work right now and I can''t use

Hi all! I am a long time lurker, but have not posted until now. My old trusted firewall machine broke a couple of weeks ago and I replaced it with a XEN domU that is using DNAT and has two interfaces. The firewall domU and the FTP server domU are both guests on the same dom0. All three machines are running Debian/etch (stable) and Shorewall has version 3.2.6. I can''t get FTP to work

I have Centos 5.7 64bit; I have installed vsftpd as standalone service and using it for two years now with no problem. Suddenly; only it works with active mode. The passive mode stops working and gives time out. Firewall is disabled and SELinux is set to permissive. I ran tcpdump and I noticed that only first three packets reached the FTP for passive mode and no more packets on other ports #

Hi all, I want to run vsftp behind a firewall.(i.e DMZ zone) . It is runnig as passive ftp. the theroy behind passive ftp is , - FTP server's port 21 from anywhere ( Client initiates connection) - FTP server's port 21 to ports > 1024 (Server responds to client's control port) - FTP server's ports > 1024 from anywhere (Client initiates data connection to

Hello I''ve setuped a bridge with iptables + layer + ipp2p + tc I don''t know how to shape passive ftp ? If I put rules on port 20, 21 or using layer 7 iptables accounting still empty ... When I done a tcpdump I can see that othe port than 20 or 21 are used ... Any Ideas of how I can achieve this ? Regards

Hi all, I want to run vsftp behind a firewall.(i.e DMZ zone) . It is runnig as passive ftp. the theroy behind passive ftp is , - FTP server''s port 21 from anywhere (Client initiates connection) - FTP server''s port 21 to ports > 1024 (Server responds to client''s control port) - FTP server''s ports > 1024 from anywhere (Client initiates data

this : iptables -A FORWARD -i internal-interface -j ACCEPT iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -j DROP doesn''t seem to work for active-ftp .. i even manualy loaded ip_conntrack_ftp but as u see it is unused : # lsmod Module Size Used by Not tainted ip_conntrack_ftp 4272 0 (unused) iptable_nat

Hi! I use standard Bering 2.2.2. I am trying to get my FTP-server to work with another portnumber than 21 (On port 21 all works great, but I´m really interested in running two FTP-servers, so I want to figure this one out first). Read the FAQ: http://www.shorewall.net/FTP.html and now I got this setup: In Rules: DNAT net loc:192.168.3.2 tcp 99 In Shorewalls modules.conf (tried

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all, Remember my thread that I can''t FTP into my server? It seems that (well, what Tom has suggested) ip_conntrack_ftp and ip_nat_ftp weren''t loaded. I don''t know why in that particular machine mdk9.2 doesn''t load them by default, whereas in other machine they were loaded. I have put them in /etc/modules, and

Howdy I'm trying to run FTP server behind firewall. And i can't enable passive mode from the Internet. There are plenty howtos but there aren't many with my combination. For now i have configured port forwarding and ftp server itself. On the router: # firewall-cmd --list-all --zone=external external (active) interfaces: enp3s1 sources: services: openvpn ssh ports: 1194/tcp

Hello everyone, I run a Pure-FTP server on my DMZ. I can specify with Pure-ftp what ports will be used for clients when they connect with passive mode. I entered 50000 50400, so I have enough for 200 users at the same time. Then the pure-ftp website tells me to open up those ports on the firewall. How do I do this? In my rules file is now something like: ACCEPT net dmz:10.0.0.2 tcp

Hi All How to classify packets belonging to a FTP session? Port 21 session is easy. but what about data transfers? Their port numbers (both) are above 1024. I was thinking about ip_conntrack_ftp. Something like: iptables -A FORWARD -p tcp --sport 1024: --dport 1024: \ -m state --state ESTABLISHED,RELATED -j CLASSIFY --set-class X:Y But what if I also have ip_conntrack_irc, for instance.

Hello , Regarding a previous post in this group. (see below) Does anyone know how I can change the options for ipnat_ftp or ip_conntrack_ftp when I don''t load them as modules but have them compiled in the kernel? I''ve been looking on google since long now, but can''t seem to find it. Any idea, anyone? I have added these ''options'' and did a network

-------- Original Message -------- Subject: Re: [LARTC] DNAT rule for vsftp (PASSIVE FTP) Date: Fri, 05 Oct 2007 12:17:42 +0530 From: Mohan Sundaram <smohan@vsnl.com> Reply-To: smohan@vsnl.com To: Indunil Jayasooriya <indunil75@gmail.com> References: <7ed6b0aa0710042251u6442fb85ma74e46aa9d3f81f9@mail.gmail.com> Indunil Jayasooriya wrote: > Hi all, > > I want to run

New install of CentOS 4.1; our first try at the 4.x. On previous 3.x installs we've used proftpd. On this one we're using (trying to use is a better statement of what we're going through) the default daemon, /usr/sbin/vsftpd. But we don't get anywhere. <snip> ftp> passiv Passive mode off. ftp> put ~/xorg.conf.work local: /home/jlasman/xorg.conf.work remote:

Still not working I really have to change 21 port on 80 port, my friend has only www and mail on his netwok. He has rigorous admin. I have done : !! in proftpd.cof : # Port 21 is the standard FTP port. Port 80 !! in /etc/shorewall/modules: loadmodule ip_conntrack_ftp ports=21,80 loadmodule ip_nat_ftp ports=21,80 AFTER THAT AND RESTARTTING PROFTP AND

Hi - I have a ftp server running version 2.0.7 of vsftpd on a CentSO 5.2 server using iptables behind a Linksys router. The setup works for UNIX machines on either side of the Linksys router. For the Windows machines it only works if they're behind the Linksys router - ftp does NOT work if they're outside the Linksys router. I'd like to solve two problems: (1) make ftp work

I just installed CentOS4 on my main server. It runs proftpd and is not NATted.. When I did the install I said to allow FTP and HTTP. I can ftp from windows dos ftp client. In IE I get "Unable to build data connection: No route to host" ncftp I get.. Data connection timed out. Falling back to PORT instead of PASV mode. List failed. Wget and FireFox just time out. Anything I need

Hi, ok Im all new to this :-) for pasv ftp in your example you say for example to use ports 65500-65535, but i dont see that u open those ports in your example fw scripts..? any hints ? -- Christophe Zwecker mail: doc@zwecker.de Hamburg, Germany fon: +49 179 3994867 http://www.zwecker.de "Who is General Failure ? And why is he reading my disk

mdew:~# tc qdisc add dev imq0 handle 1: root htb default 12 r2q 1 Cannot find device "imq0" mdew:~# lsmod Module Size Used by Not tainted ipt_REDIRECT 728 0 (autoclean) ipt_MARK 728 2 (autoclean) iptable_mangle 2100 1 (autoclean) ipt_REJECT 2712 4 (autoclean) iptable_filter 1672 1 (autoclean)