similar to: Multiple IPs on eth0 with dchpcd

breakdown of what iam doing ok i have access to 6 ips and i want to run all of them through my firewall ifconfig eth0 209.159.32.162 netmask 255.255.255.0 up ifconfig eth0:1 209.159.32.163 netmask 255.255.255.0 up that sets up the network card to have 2 address well in shorewall i tried to add eth0:1 to my interfaces well it says that Determining Zones... Zones: inet inet2 loc cust vpn1

>What does that mean? In the Mandrake control center, the options for DNS Servers get wiped out... I think this is just a Mandrake issues. Was just the one issue that got me convincedto switch to Fedora >Groan Yes, I''ve groaned much since =( >Exact error messages are helpful -- vague references to "...or >something..." are not helpful. Sorry about that..

Hi everyone! First of all: Big thanks to Tom for this great work!! Now on to my qestion: I am using Shorewall among other machines on an new server where we need some kind of accounting. The script we would like to use for this is iam (http://intevation.de/iam/). The docs say: Alternatively you can use your own iptables script and only add the ''dump'' option, which should

Hello, I''m using shorewall-4.5.16 with centos5. The dhclient stores the lease information on the /var/lib/dhclient/dhclient-<DEVICE>.leases file. The /var/lib/shorewall/firewall script has the function detect_dynamic_gateway that detects the gateway based on the leases file. The code in the function is: detect_dynamic_gateway() { # $1 = interface local interface

Thanks Tom Sorry, I was wrong, this is the correct question... I have this configuration: | Email Server 192.168.0.253 | ___|___ Port 25 SMTP ___|____ ____ | LAN |-------------------------------------Eth1

So I am trying to get a firewall up at work using Shorewall 2.2 / Mandrake RC 1, where we have multi-ips assigned to a single machine.... Now at one point I had Shorewall and Mandrake configured and it was working... this was our setup essentially (I''ll use 192.0.0.x as out external IP addresses) In ifconfig: eth0 192.0.0.202 nmask 255.255.255.248 eth0:1 192.0.0.203 nmask

hi all iam newbee, i ve install shorewall 1.3.11 on mandrake 8.2 , i ve eth0 with local ip 192.168.40.40/21 and eth1 203.128.65.22/255.255.255.248 the problem is when my client try connect to internet the page cannot be displayed and while client try ping to internet address reply from 192.168.40.40 destination net unreachable why it can happend ? anyone can give me a hand

I'm trying to get an Archlinux guest running on a Archlinux host. Everything works except ethernet. When I boot the host, --- # dmesg |tail [ 8.265493] Bridge firewalling registered [ 8.514547] IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready [ 8.645303] ip6_tables: (C) 2000-2006 Netfilter Core Team --- Then I do --- # virsh -c lxc:/// start gitolite Domain gitolite started #

List, I have a server Co-Located, it has multiple ip''s "6" and I was wondering if there was something I should look for before emplementing Shorewall. I have been using Shorewall on my lan/wan for some time now, just never with Virtual ip''s to the Intrernet! System is: WhiteBox 3.0 As I said in body 6 ips eth0,eth0:0 and so on . Any help is appreciated! Brian

I did some looking on the mailing list archives and can''t seem to find exactly what I need, I''m also having troubles figuring this out on my own, so if anyone has any advice, tips, whatever, that would be great. I''ve got a machine with 3 network cards in it, one for a DMZ (with 3 machines on a switch each with a real IP address), one for the local network on a

Hi, I am migrating from one ISP to another, and would like to run both simultaneously for a while. So: (both netmask 255.255.255.248) [ISP1] 24.106.62.180 [ISP2] 209.181.237.230 | | | | \ / -----[ HUB ]----- | | -------- eth0 --------- | Linux FW/Server | ---------eth1 --------- | | [ HUB ] | 10.0.0.x/255.255.255.0 The default IP on

Hi, I am having problem in getting my fw to connect to the net, I had set allow fw net in the policy. I suspect maybe shorewall having problem because I have 5 public IP alias to my fw, which is eth0, eth0:1-eth0:4. Because before I add more ip to this interface my fw able to connect to the net. How can I set one IP to be bind to this fw, or I had to change the rules from fw to fw:w.x.y.z? One

Hey all, A while ago today I posted about not being able to get my two interface setup working with a router (di 652 wireless/wired). I recieved help from Tom and got everything in the router turned off and set it up as a switch rather then a rouiter, this still never corrected my problems. Use tcpdump I see there is alot of traffic, but as soon as I dhcpcd eth1 (local) I loose all outside access

I have the problem when my localnetwork do telnet to the net Shorewall:FORWARD:REJECT:IN=eth0 OUT=eth2 my files are the following: policy #SOURCE DEST POLICY LOG LEVEL LIMIT:BURST loc net CONTINUE info loc fw ACCEPT info loc loc ACCEPT loc dmz ACCEPT info fw

Hi. I have a Linux box with two network interfaces. The local interface has an alias so it can listen to two (completely) different subnets. I need to configure a Firewall and a DHCP server in the same machine. I have: eth0 > net eth1 > loc1 eth1:1 > loc2 If my DHCP server will use eth1 IP address (main IP address for that interface), How do I specify the ''dhcp'' option

Hello I''m new to the list. I installed a vserver (http://www.linux-vserver.org/) on my gentoo server As network interface is used an alias (eth1:0) eth1 is the card of my "loc" zone. eth1:0 has an address from the same subnet from the vserver I can connect to eth0 but not to the internet. From my local net everything works fine. I have an entry in "mask" for eth1

Because of the volume of questions recently regarding Shorewall and Virtual/Aliased Interfaces (e.g., eth0:0), I have written a document that discusses this issue. It may be found at: http://www.shorewall.net/Shorewall_and_Aliased_Interfaces.html The document is linked from the "Documentation Index" and from FAQ #18. -Tom -- Tom Eastep \ Shorewall - iptables made easy Shoreline,

i''ll need to have a virtal server, but why i can do this?

Hello, My server is on Mandrake 10.1 off. eth0 is WAN with static IP connected 512 DSL eth1 is LAN. My default shorewall settings are : Source zone Destination zone Policy Syslog level Traffic limit loc net ACCEPT None None fw net ACCEPT None None net Any

Dear friends, a pointer to howto very welcome please. Shorewall runs on my laptop. Now is quite well configured when it is attached to my LANs (home or office). From times to times I use it while traveling and connect through a GPRS modem which shows up as ppp0. What is the simplest way to configure shorewall so that when ppp0 goes up (well after shorewall is already running) it will treat