similar to: dnat problem

Hi people, what is the current status of send/receive fax on asterisk extensions, i dont want to receive the fax and send an email or viceversa, i want to connect a standard fax machine to a Linksys' ATA (FXS RJ11 port) . Webdoc?, pointers? Thanks

Hi People, what files is processed first?, balcklist or rules, i want to globally filter imesh, but at the same time allow managers to connect, i.e. , imesh work on port 1214, i have this: /etc/shorewall/blacklist #ADDRESS/SUBNET PROTOCOL PORT 192.168.0.0/16 tcp 1214 192.168.0.0/16 udp 1214

Hi, i cant make a three way call using grandstream phones (BT-100) and asterisk using sip, is this supported or i need a zap interface? thanks

Hi list, I am a happy user of shorewall, i have followed the instructions in the shorewall''s web site relative to the squid transparent proxy configuration,all works ok, but i have been instructed to let adicional specified ports (aplications) to be snated (allowed to run) together to the web browsing service,i mean if i snat the network (i have a static ip from my isp), all

Hi people, is there any good document on setup asterisk using only its voip functions , i mean without e1/t1 hardware, i have a cisco 5400 gateway and a cisco 7000 working as gatekeeper, can asterisk register with this GK?, im thinking in using cisco voip phones Any pointer will be apreciated, and sorry for my bad english Miguel

Hi list, I have a shorewall installed on 2 interfaces which also has multiple static public IP. Let''s say I have 1.2.3.4 and 1.2.3.5. I have assigned nat with: 1.2.3.4 eth0 11.22.33.4 no no But then I have a situation where I need 11.22.33.44 to connect to a host in the net zone and appears also to be 1.2.3.5 not only 1.2.3.4. How to do it? TIA Willy

Hi I have a trouble with centOS 4 The process kswapd0 eat almost all my memory space, and also this process get almost 100 percent of cpu, and the box go slow I have read that this problem is fix when the kernel is upgrade but I do not know hot to update my kernel. when I type yum list \kernel* I get the following list: [xxx at xxxxxx]# yum list \kernel* Setting up Repos addons

Hi, I have a client behind shorewall which has 2 IP: 192.168.8.35 is the real IP and 192.168.8.37 is the virtual IP. I have added DNAT rules into shorewall: DNAT net loc:192.168.8.35 tcp 11008 - 1.2.3.4 DNAT net loc:192.168.8.37 tcp 55000 - 1.2.3.5 1.2.3.4 and 1.2.3.5 is virtual IP

So I am trying to get a firewall up at work using Shorewall 2.2 / Mandrake RC 1, where we have multi-ips assigned to a single machine.... Now at one point I had Shorewall and Mandrake configured and it was working... this was our setup essentially (I''ll use 192.0.0.x as out external IP addresses) In ifconfig: eth0 192.0.0.202 nmask 255.255.255.248 eth0:1 192.0.0.203 nmask

>What does that mean? In the Mandrake control center, the options for DNS Servers get wiped out... I think this is just a Mandrake issues. Was just the one issue that got me convincedto switch to Fedora >Groan Yes, I''ve groaned much since =( >Exact error messages are helpful -- vague references to "...or >something..." are not helpful. Sorry about that..

The ''firewall'' script currently in the /Shorewall CVS project: a) Is approximately 15% faster starting/restarting on my configuration -- please report your experiences with it. b) Reloads Traffic Control/Shaping as part of "shorewall refresh" c) Turns off the shell trace after an error has occured (except when the command being traced is "stop" or

I recently implemented v2.0.9 using ''shorewall setup guide'' 2004-07-31. Starting with block everything not known to be in use and opening ports as complaints come in. This has led to a few rule changes. After a rule change I use shorewall restart to reload the rules. Seems to work OK... except for an outbound NAT SMTP connection from a mail server on .122 to postini.com. The

I forgot to include my masq file. It''s pretty straightforward: eth2 eth0 eth2 eth1 Cheers, Brian

Hi, this was my fault, you are right, i tried with a X-lite Professional and the conference (3-way call) is working now, i guess the phone BT-100 doesnt support it, i dont have a BT102D, so i can tell if it works too, bye -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of mmiranda@americatel.com.sv Sent: Friday,

Hi all I have a box with Centos 4 and qmail with all pathches. since Last month i have had twice the same problem. The process kswapd0 uses all my resources of CPU and RAM memory and the consequence is that my local queue grow up and the box go slow too. The first time i guess the problem was the version of the kernel, so i did an upgrade form kernel.i686 2.6.9-5.0.3.EL to kernel.i686

https://bugzilla.netfilter.org/show_bug.cgi?id=850 Summary: DNAT applied even after deleting the IP Tables DNAT Rule Product: iptables Version: 1.4.x Platform: All OS/Version: All Status: NEW Severity: major Priority: P5 Component: iptables AssignedTo: netfilter-buglog at

I have a pretty straightforward shorewall (v 2.0.12) setup in my Phoenix office. IP addresses on the firewall eth0 172.16.10.249 eth1 12.47.198.100 eth1:1 12.47.198.108 eth1:2 12.47.198.101 eth2 172.16.11.249 interfaces: loc eth0 detect net eth1 detect blacklist dmz eth2 detect vpn1 tun1 192.168.124.255 zones net Net

Hi all, net : internet zone dmz : DMZ zone Lan : local network zone in 1.4.6c this rule : DNAT all lan:10.0.0.1 tcp http - 192.0.0.1 does generate the following iptables rules in nat table : Chain OUTPOUT DNAT tcp -- 0.0.0.0/0 192.0.0.1 tcp dpt:http to:10.0.0.1 Chain net_dnat DNAT tcp -- 0.0.0.0/0 192.0.0.1 tcp dpt:http to:10.0.0.1 Chain dmz_dnat

Hi, i''m a shorewall users and i have the following problem: I have one class C range of IP''s and i have three zones (net, dmz , loc) I need create one rule to dnat one valid ip address (but not in use in one computer) to one invalid host in my loc zone. How i do? I try this: DNAT net:200.200.200.200 dmz:200.193.137.38 tcp 137,138,139,445 -

I am running version 3.0.7 of Shorewall on a Debian Sarge system, but when I start Shorewall I get this: /usr/share/shorewall/firewall: line 204: 4: command not found I looked there and found this: # Run ip and if an error occurs, stop the firewall and quit # run_ip() { if ! ip $@ ; then if [ -z "$STOPPING" ]; then error_message "ERROR: Command \"ip