similar to: Config and other areas of struggle

Hi Damien (where Dan come from??) I use 81.174.146.88:28888 Bet your router does not have loopback So if you are using sam broadcaster it needs the icecast settings input to it, so it can forward to the icecast server. If you use the local IP address of the icecast server you will see what I see. Regards From: Damien Sykes-Lindley Sent: Saturday, July 23, 2016 10:29 AM To: Icecast streaming

i hear you and you realising you can hear yourself congrats From: Damien Sykes-Lindley Sent: Saturday, July 23, 2016 1:03 PM To: Icecast streaming server user discussions Subject: Re: [Icecast] Config and other areas of struggle Hi Alan, OK. I am now streaming on mountpoint /blah. I’m not streaming music just yet, but if the stream works you should hear me typing and other stuff. Life in my

What are you using to forward the 'music' to the Icecast server that I can see? If you are using darkice for example, have you configured the darkice.cfg so that it matches icecast's configuration? Icecast appears to be working, but has no stream. If I knew what the passwords were, I could configure my darkice on my pi to forward music to your Icecast and it would stream it - you just

Confused me for ages.. until one day! Which out of the listed machines (on the router) is the one you are needing the port forwarded to? Forward that machine to the port you require, I would have used a lower port number 8010 or another unused port. From: Damien Sykes-Lindley Sent: Saturday, July 23, 2016 9:39 AM To: Icecast streaming server user discussions Subject: Re: [Icecast] Config

I think some fundamental misunderstanding thing is perhaps going on. What is the icecast server that I can see here: http://home.dayme.me:28888 supposed to be streaming? And If you use the local IP of that icecast server on another local machine (or same machine) can you then see the admin page? Go back to first line: What is the icecast server that I can see here: http://home.dayme.me:28888

try the IP of the server, and port ford ward that. my best guess, works on a machine with localhost, if you port forward the localhosts IP From: Damien Sykes-Lindley Sent: Friday, July 22, 2016 9:21 PM To: Icecast streaming server user discussions Subject: Re: [Icecast] Config and other areas of struggle Hi Marvin, Thanks for the clarifications. I didn't enter any address in the

Hi Alan, Yes, this is what I am saying. The ports are already forwarded. Still no go. Cheers. From: Alan Bowness Sent: Saturday, July 23, 2016 10:01 AM To: Icecast streaming server user discussions Subject: Re: [Icecast] Config and other areas of struggle Confused me for ages.. until one day! Which out of the listed machines (on the router) is the one you are needing the port forwarded to?

I’m listening to you both, Its working, but not for you locally, could be a firewall issue on your PC? perhaps changing the port to 8010? If other servers can be seen on the WAN from your internal network it could be a port conflict, or firewall issue. Alan From: Damien Sykes-Lindley Sent: Saturday, July 23, 2016 1:12 PM To: Icecast streaming server user discussions Subject: Re: [Icecast]

No loopback on router, try connecting via 3G to see. If there's no stream going to Icecast no media player can play nothing. Firewall? Try switching it off for a few minutes and test. You will get there! Sent from my iPhone > On 23 Jul 2016, at 11:49, Damien Sykes-Lindley <damien at dcpendleton.plus.com> wrote: > > Hi Alan, > I am not currently streaming anything. Every

I can see it from here. I should be able to mount a stream on it The way you have it set up the stream on the same machine can't mount that address. The port is being hogged by the router for router server only [ no local loopback ] Use the machine IP and it wil work. R On 23/07/16 21:34, Alan Bowness wrote: > Hi Damien (where Dan come from??) > I use 81.174.146.88:28888 >

On 22 Jul 2016, at 23:12, Alan Bowness wrote: > I use a few raspberry pi’s and leave the icecast settings as > localhost, and run darkice on the same Pi, I have let the router know > to pass requests to port 8000 to the IP of the Pi. > Using your external IP is not right, if your server is say > 192.168.1.21 thats the port forward, just be sure that the ports you > use are

I use a few raspberry pi’s and leave the icecast settings as localhost, and run darkice on the same Pi, I have let the router know to pass requests to port 8000 to the IP of the Pi. Using your external IP is not right, if your server is say 192.168.1.21 thats the port forward, just be sure that the ports you use are in the router too, udp/tcp I use both myself watch for typos. I think you are

On 22 Jul 2016, at 20:39, Damien Sykes-Lindley wrote: > Hi there, Hello! > […] > I then tried accessing the stream directly from the url and found to > my surprise that the stream was working. Since my browser has stream > playback support, it started playing straight away. If your browser is able to play the stream, Icecast works and if it does not with a different player,

On 23/07/16 08:31, Alan Bowness wrote: > The only other thing I can think of is the hostname in the main <icecast> > section, but that is set to my domain address, not to localhost or any IP > address, local or otherwise hostname should be the 'name' of your host computer. I use ip address so hostname = 192.168.x.x or 10.0.0.x or whatever your network uses make sure your

Hi there, I am relatively new in the field of server administration, so please do bear with me if my question has an answer which seems blatantly obvious. I recently installed the latest Icecast onto my machine and read the documentation in order to find out how to configure the server. Both the information in the docs, and even the example config file, seemed reasonablly self-explanatory. After

Hi Alan, All firewalls are switched off and I’ve changed the port to 8010. Still can’t access it from the global IP or domain name. Cheers. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.xiph.org/pipermail/icecast/attachments/20160723/334e96e1/attachment.html>

I use it for streaming 24/7/365 on the WAN – no issues at all in using the default ‘localhost’, sometimes I may use the LAN assigned IP too. Though it is just a constant stream, no tunes or play lists are used here. So I have no experience with that, though port forwarding is part of my day job in regard to anything ‘servers’. I still think it’s a simple forwarding/addressing thing, else

Hello, Set up a CentOS 7.5 VM linode for git now that github has been bought. I'm not anti-microsoft but I'm worried they will make changes that I don't like (e.g. requiring ms account, changing billing, etc.) so I figured better take control now. Currently moving my private repos and have them set up in my home directory there, but my public repos - I want to set them up with a

I was wondering if one can have the coefficients of VAR model sorted according to variable names rather than lags. If you notice below, the output is sorted according to lags. >VAR(cbind(fossil,labour),p=2,type="const") VAR Estimation Results: ======================= Estimated coefficients for equation fossil: =========================================== Call: fossil = fossil.l1

Hi there, I am reading the 2004 paper "Smoothing with mixed model software" in Journal of Statistical Software, by Ngo and Wand. I tried to run their first example in Section 2.1 using R but I had some problems. Here is the code: library(nlme) fossil <- read.table("fossil.dat",header=T) x <- fossil$age y <- 100000*fossil$strontium.ratio knots <-