similar to: Routing or Nat question

Hello guys, I have two ISP's connected to my router. One via eth2, second one via ADSL modem, with ppoe doing on my Centos 5 . The problem I have is, that when ADSL fails , interface ppp0 is removed. This also removes my static routes configured for this interface. I do not want that, as I have load balancing configured and default route is removed when ppp0 interface disapears. This is my

Hello All, I've been getting an error using rsync that I've been trying to track down the cause of, but haven't been able to solve yet. When I try to connect to a remote rsync deamon, using a double colon address like 192.168.0.2::classes to copy files in either direction, I get this error after a timeout. @ERROR: chroot failed rsync: connection unexpectedly closed (128 bytes

Hello Walter, On Sat, 13 May 2017 13:08:17 +0200 "Walter H." <Walter.H at mathemainzel.info> wrote: > On 13.05.2017 00:29, Robert Moskowitz wrote: > > I have been working, for the past few years, with armv7 SOCs and have > a number of servers working. > > > > Intel, etal are catching up with ARM and I have seen ones like: > > > >

I have one of my asterisks off an xDSL modem with a dynamic IP address. The IP address keeps on changing so I am curious as to what other people are doing to work around this issue. I am contemplating to register for a dynamic DNS service but then my communications become dependent on the availability of this service. The "host=dynamic" for SIP seems interesting. Any suggestions?

hi, here is my configuration : I've got a NATed network through a linux box the icecast server is running on the router I'm running ices 2.0 beta 4 on my own box everything seems to work fine, BUT: - I don't appear on yp directories (which are of course commented out in the icecast config file) even with my public IP address or a dyndns domain - the stream lags on the internet.

Am 15.06.2020 um 21:50 schrieb Luca Bertoncello: > What do you mean now? If I can use the full available band or if I can > download exactly 50Mbs? > The answer to the first question is: YES! That's why I use a traffic > shaper... ;) > The answer to the second question is: NO. I made a speedtest right now > and I get only ~18Mbps download. And some other information, too.

Hi - I''ve been going through the LARTC how-to and have successfully used the sample scripts (and wondershaper) with my xDSL links. I''m now faced with the challenge of providing 8 users at work an effective remote access connection over a PSTN ppp connection. The critical traffic in this case relates to our stock enquiry application which is running over terminal services.

Hi All, I'm trying to get my Mother's ADSL USB Router to work on CentOS 4-3. I see the device in Hardware Browser/System devices but nowhere in Network Configuration is it an option. I even tried New/xDSL but it doesn't appear as an option there either. Any suggestions for this? Cheers. Mark Sargent.

Hello, we are trying to use samba 3.6 over a big network with multiple xdsl link (512Kbit to 10 Mbits not symetric). We have a main site with two domain controlers (Windows 2k8 R2) and about one hundred middle sites with samba member servers. We have a big issue with Active Directory (AD) ACL which disapear when member server (powered by samba and winbind) can't discuss (for network

On Thu, 18 Mar 2004 10:15:32 +1100 Michael Smith <msmith@xiph.org> wrote: <p>> > Do I need more bandwith? I have xDSL with about 512K of upload > > bandwith with in fact 96-128K available for icecast. What is the > > needed bandwidth for every listener and for a standard quality ? > > > > Well, if you're streaming at 48 kbps, then it's 48 kbps

I am frustrated. This is a dual boot box, Win XP (Spanish) and CentOS 4.4. The phone company man came today and installed ADSL to the WinXP side and that works fine. I can't get the box online, while in CentOS 4.4. The ADSL router has a fixed IP address (192.168.1.1) and he configured it to get the IP from the ISP via DHCP and get the DNS servers automatically. When I try that on CentOS (which

I need basic PPPoE startup help. adsl-start DID bring up my PPPoE link (ppp0) to my ISP over eth0 via the DSL modem/bridge. My IPv4 CIDR block is routing and Shorewall is doing the firewalling. But shorewall has to be started after ppp0 is up and working. For now this means running shorewall restart (or start?). Shorewall 4.2 will have a way to restart shorewall without recompiling, I

I'm having problem connecting to my isp with my sangoma s518. Everything seems to run smooth and wanrouter are training to connect....but forever.. Now, to test the connection i mounted up my standard nic and my old dsl router, to establish a standard basic pppoe connection..... and I can't with centos. I follow this standard setup:

AHOI! I've big trouble by setting up CentOS 6.3 for my new vDSL. As I've found out, the German Telekom is using VLAN7 for her internet-(data) connections. => http://workaround.org/blog/vdsl O.K. what I've done: The NIC where's my DSL-modem is connectet is eth0. cat /etc/sysconfig/network-scripts/ifcfg-eth0 # device for vDSL-modem DEVICE=eth0 HWADDR=00:30:1B:14:08:67

Hi, I have been trying to get T.38 to work with clients behind NAT for the past week but with no success. I have an asterisk server on the public internet and several Grandstream (I tried Linksys too) HT502 ATAs behind NAT in different locations. I tried every possible combination of NAT, canreinvite, t38pt_usertpsource entries, I even tried asterisk 1.4.19, 1.4.24.1, 1.4.25 all with the same

Hi all I get a Cisco 1841 router, connecting the office through a CHAP PPPoE link: [...] interface Dialer1 ip address negotiated ip mtu 1492 ip nat outside ip virtual-reassembly encapsulation ppp ip tcp adjust-mss 1452 dialer pool 1 dialer-group 1 no cdp enable ppp authentication chap callin ppp chap hostname username at isp ppp chap password 0 s0meStr0ngP4sswd [...] As

I am looking to find people who are using either a PCI xDSL card or an USB xDSL modem right now under Linux. I am not entirely sure where I should go look to find people who do this, but they definitely exist now that there are drivers for several modems. Specifically I am interested in performance and latency. When using an ethernet connected xDSL modem, you obviously get the ethernet latency

I am not getting my IPv6 address and prefix delegation for my ppp interface on my new gateway. ppp is working right. It is getting authenticated and getting the its IPv4 address. Shorewall is doing the forwarding and the static routes on the internal interface for IPv4 are working. But no IPv6. Here is my ifcfg-ppp0: USERCTL=no BOOTPROTO=dialup NAME=DSLppp0 DEVICE=ppp0 TYPE=xDSL ONBOOT=no

The PC (Outlook) is accessing the mailbox via POP3, the iPhone is using IMAP; please consider we are talking about a user's home setup, so it's pretty difficult to have a more detailed report on his part (Outlook version, iPhone OS version, xDSL router type and configuration, etc.). The mail server 'dovecot -n' output is attached. The symptoms: when the Mail application is

Hi Philip, I'll do more testing and logging over the weekend and see how I go. At the moment I have 2.4.4 Win32 running on port 9000 @ http://radioinvercargill.nz:9000/ I'm not sure how good this will be from overseas as the queue is only about 8 seconds, burst about 4 seconds. It's adequate for xDSL/Fibre and 4G mobile over here and is on a 450Mbps upstream fibre line. I've