similar to: Ices and ALSA / OSS

Hello Karl In reference to: http://lists.xiph.org/pipermail/icecast/2004-June/007473.html I am also receiving this error with an M-Audio Audiophile 2496 device running with the ice1712 ALSA module. I've not quite figured out how to test it with a hw pcm because it isn't accepting any of my formats. I've no idea how ALSA's plug opens it but I've tried all the obvious ones,

Hello, I have a computer with this sound card (from lspci): 0000:01:04.0 Multimedia audio controller: Creative Labs SB Audigy LS Alsa is installed (maybe not properly...) # cat /proc/asound/cards 0 [CA0106 ]: CA0106 - CA0106 Live! 7.1 24bit [SB0410] at 0xc800 irq 10 But I have the impression alsa is ok : :~# aplay -l **** List of PLAYBACK Hardware Devices **** card

It was kind of working for a while but I could not hear the stream but it was running. I started messing with alsamixer and now it crashes. I see the error but I don't know how to fix it. ices-oss-xml: (alsa is the same just a different input module) <?xml version="1.0"?> <ices> <!-- run in background --> <background>0</background>

I am having problems getting Ices to work with ALSA. If I use arecord (arecord -D plughw:0,0 output.wav) I can record the input from my microphone into a file. The playback works perfectly. However, if I use Ices with the same values I hear nothing on the receiving end of my broadcast (although I can connect to it). In order to do a further test, I setup a <savefile> tag in my

Hi... now, I have a trouble on one source machine. I'm using oss to get the sound. encoding is ok with ices 2.0kh60 but with ices 2.0.1, I'm getting [2006-06-07 23:17:48] INFO ices-core/main IceS 2.0.1 started... [2006-06-07 23:17:48] EROR input-oss/oss_open_module Couldn't set sampling rate [2006-06-07 23:17:48] EROR input/input_loop Couldn't initialise input module

I get a segmentation fault when starting the IceS encoder on a Linux-based QNAP NAS. I'm trying to set up IceS to stream an ALSA input to Icecast. Icecast works well and confirms when I stream using other things to it. However IceS hits a segmentation fault immediately after starting the encoder. The IceS log is: [~] # sudo ices /etc/ices.xml [2020-05-11 19:24:34] INFO ices-core/main IceS

Hello, I found a bug by metadata updating in ices-2.0.0. I use icecast2 server for streaming stations of Czech Radio. Czech Radio prefers streaming in both formats mp3 and ogg. So - I'm using DarkIce as a live audio streamer, which does encoding to mp3 and ogg streams together. I would like to insert textual information about actual streaming program, but DarkIce does not support it. So -

Iceuse - Kris wrote: > Hello, > > I have a computer with this sound card (from lspci): > 0000:01:04.0 Multimedia audio controller: Creative Labs SB Audigy LS > But when I put > hw:0,0 > as input device, I'm getting > [2005-11-07 21:53:19] EROR input-alsa/alsa_open_module Failed to open > audio device hw:0,0: No such device or address > > I tried many

I posted the other day with a question about a player that mysteriously quits playing the icecast stream. I believe the problem is related to the icecast stream for two reasons. 1) Because it quits on more than one different player (Winamp 5 and Foobar2000) and 2) Because I used to use shoutcast with Winamp 2 and never had this problem. Anyway, I tried to get as much information about the problem

Karl, I installed icecast/ices from the latest stable ebuild on gentoo portage. It appears from the log file that ices is only version 2.0.0 even though the ebuild is version 2.1.0. I just reinstalled icecast with the newest (unstable) ebuild and it still doesn't seem to have version 2.0.1 of ices. Do you recommend that I manually compile or that I find a way to use a wrapper for ALSA to

On 2006-06-21T15:21+0100 Karl Heyes wrote: > You capture at 48000 but resample from 44100, that will cause problems. > You resample to 22050 so that will affect quality, you haven't said what > bitrate you want to target for, so resampling/downmixing may be required > anyway. I am unsure about these settings. Any particular suggestions? I don't quality with voice, just

Hello, I'm using ices2 on ALSA 0.9.6 drivers. After some troubles, it works. This is my ices-alsa.xml config file: <?xml version="1.0"?> <ices> <background>0</background> <!-- run in background? (unimplemented) --> <logpath>/tmp</logpath> <!-- where logs, etc go. --> <logfile>ices2.log</logfile>

Hello. I am running an up-to-date cvs snapshot (10 Aug 03) of ices2, and I cannot get the Metadata update from file to work (indeed this has always been true on all previous versions of ices2 that I have used). If I send the ices process a SIGUSR1, then the error log shows that the update is taking place, but immediately followed by a read error from the OSS input module, causing ices to die. I

I have been successful in running a playlist through Ices and Icecast... I have run into difficulty running a live stream through the soundcard, however... The following is the log when I attempt to run ices ices-mylive.xml: INFO ices-core/main ices started... EROR input-oss/oss_open_module Couldn't set sample format to AFMT_S16_LE EROR input/input_loop Couldn't initialise input module

hi everyone, congratulations on the release of icecast 2.1.0 I presume this is the right place to post about iceS. please correct if wrong. I have a two instance setup, and have been finding that after a network error occurs, the instance does not reconnect. The source server is behind a linux NAT box. I have simulated the problem by using iptables REJECT with tcp-reset and here is the

Me again.... After getting regular playlist streaming working, I'm not trying to complete the project and implement the live streaming. Unfortunately, due to the sad, lacking documentation for icecast and ices (especially what the xml tags in the configuration files actually DO and how they can be used), I've run into another snag that only you guys can help me out with. Here it goes.

On Tue, 2003-08-05 at 21:22, Matthew Fields wrote: > I have been successful in running a playlist through Ices and Icecast... > I have run into difficulty running a live stream through the soundcard, > however... > > The following is the log when I attempt to run ices ices-mylive.xml: > > INFO ices-core/main ices started... > EROR input-oss/oss_open_module Couldn't

I've got icecast2 and ices2 working with a playlist of ogg files and it works fine. I've been playing for a few days with getting my audio to work at all. I've now got my audio where I can play an ogg file from ogg123 -d oss filename.ogg. When I run ices ices-live.xml I get the following error in my log file: [2004-09-30 09:38:07] INFO ices-core/main IceS 2.0.0 started...

Hello I've discovered, that sending a SIGUSR1 signal to ices causes it's shutdown when recording from an alsa dsnoopped device. > [2004-11-01 18:51:51] INFO signals/signal_usr1_handler Metadata update requested > [2004-11-01 18:51:51] DBUG metadata/metadata_thread_signal meta thread wakeup > [2004-11-01 18:51:51] DBUG stream-shared/stream_wait_for_data Shutdown signalled:

I?ve successfully implemented IceCast on a Raspberry Pi and can access the stream ONLY if I use an ffmpeg statement to start the stream. Unfortunately, the stream is choppy and the sound quality is poor. I?ve tried using ICES, but I don?t get any sound. Terminal command that works: ffmpeg -ac 2 -f alsa -i hw:0,0 -acodec mp3 -ab 48k -ac 2 -content_type audio/mpeg -f mp3 icecast://source:password