similar to: Ices2 / Icecast2 / Long connect and no sound

Unfortunately, ices2 isn't writing anything to the logs. I've got them on debug mode, but there still isn't anything being written to indicate it's having a known problem. As far as the interference goes, I've found that reducing the iGain and amping the input source seems to reduce the interfencence a good deal, at least, good enough such that it's only a low murmur in

On Tue, 2003-05-27 at 19:24, adam leigh wrote: > Hallo, > > I'm trying to run two seperate live audio streams on my Redhat 8 box. I've got > two sound devices that linux (begrudgingly) acknoledges. I can get Ices2 to > run off of the onboard sound solution but there seems to be alot of > interference, however, when I try to use the PCI-card (a C-Media chipset) it >

On Tue, 2003-05-27 at 21:06, adam leigh wrote: > Unfortunately, ices2 isn't writing anything to the logs. I've got them on > debug mode, but there still isn't anything being written to indicate it's > having a known problem. well thats a problem, you should at least see ices started if not then try to resolve that first. Email the config file to me and I'll have a

hello ., i've got icecast2/ices2 (libshout/libao ) compiled/running from cvs . everything SEEMS fine . goes for 7o odd minutes , i can listen off my laptop , but then it'll disconnect . i'll check the server _ and it has crashed, or at least, my keyboard doesn't work but i can still change tty's ?? this happened after about 2o minutes (i think) when i had it set w/

> On Wed, 2002-12-11 at 19:50, Adon Irani wrote: > > > > hello ., > > > > i've got icecast2/ices2 (libshout/libao ) compiled/running from cvs . > This sound like some instability of the kernel/X/hardware rather than > ices/icecast. If by tty's you mean the console then they can switch > > I would check the system logs (/var/log/messages) first for

> On Tue, 2003-05-27 at 21:06, adam leigh wrote: > > Unfortunately, ices2 isn't writing anything to the logs. I've got them on > > debug mode, but there still isn't anything being written to indicate it's > > having a known problem. > > well thats a problem, you should at least see > ices started > if not then try to resolve that first. Email

Hi all, I'm fairly new to icecast / ices - been using icecast (2.2.0) to stream audio files for a few weeks, it works very well, now I'm trying to add live feeds via ices (v2.0.1). I've built and installed (on SuSE 9.3 platform) with no apparent errors, copied ices-alsa.xml to user area and modified paths, server password etc. When I run ices (using "ices

On Wed, 2002-12-11 at 19:50, Adon Irani wrote: > > hello ., > > i've got icecast2/ices2 (libshout/libao ) compiled/running from cvs . > everything SEEMS fine . goes for 7o odd minutes , i can listen off my > laptop , but then it'll disconnect . i'll check the server _ and it has > crashed, or at least, my keyboard doesn't work but i can still change >

Hi. Finally I got icecast and darkice to work. I can connect, but now I've got a problem. I can't hear anything. I can hear sound from the computer, but not from Another computer when connecting. I've got an usb mixer. behringer xenyx 302. I'm using alsa. What can this be? /Kristoffer -- Kristoffer Gustafsson Sal?ngsgatan 7a tel:033-12 60 93 mobil: 0730-500934

On Wed, 2002-12-11 at 21:04, Adon Irani wrote: > > I would check the system logs (/var/log/messages) first for panic > > messages, make sure you have decent cooling for fast processors. > > i still have to check my cooling , but the /var/log/messages is clear/no > panics . panics are rare but good to check for. > > Running something like ices (or any streamer)

> > > > w/ 2.2 .. but i'll go back to 2.4 now . > > 2.4 is fine, I'm running on the RH8 kernel here, which is 2.4.18 plus running 2.4.20 now /. new alsa drivers installed ( using the debian unstable , i figured this was recent enough ..instead of breaking dpkg ). > Not running X means that the graphics side won't be the cause (can be > awkward). I would

On 2006-06-21T15:21+0100 Karl Heyes wrote: > You capture at 48000 but resample from 44100, that will cause problems. > You resample to 22050 so that will affect quality, you haven't said what > bitrate you want to target for, so resampling/downmixing may be required > anyway. I am unsure about these settings. Any particular suggestions? I don't quality with voice, just

Dear Experts I have been unsuccessful getting the sound to work on a HP Mobile Workstation HP 8540w. Here's a brief rundown of where I am I did a clean new install of Centos 5.6 from DVD, using the Gnome Desktop option and no optional modules. I enabled the firewall, but disabled SELINUX. I installed three files from elrepo to make the wireless adaptor work, and specified the video

plug in your 302 USB enter: lsusb you should see: Bus 001 Device 005: ID 08bb:2902 Texas Instruments Japan PCM2902 Audio Codec look at syslog: ... usb 1-1.2: new full-speed USB device number 5 using dwc_otg usb 1-1.2: New USB device found, idVendor=08bb, idProduct=2902 usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1.2: Product: USB Audio CODEC usb 1-1.2:

Hi all. These is my first post to this list, and I want to ask about using of ices-2.0.1 with fm-tuner. I can`t find any useful docs about such usage. Here is my ices.xml : --------------------------------------------------------------- <?xml version="1.0"?> <ices> <background>1</background> <logpath>/var/log/ices</logpath>

> > Does anyone have any ideas how i stream the output from xmms (noxmms) to > > icecast without the xmms gui? > > If you don't mind the transcoding aspect (ie if source material is high > bitrate) and you have a soundcard then use xmms as you would normally > and set capture on PCM, wav or mix (depending on the soundcard settings) > in the mixer and encode with

On 15 March 2008 Johnny Hughes johnny at centos.org wrote: Sat Mar 15 15:25:13 UTC 2008 >In the Gnome mixer, make sure that the "Microphone" and the "capture" >microphone icons are NOT MUTED (a red is is muted) .. also change >devices to the OSS Mixer and in the capture tab, check the microphone >icon for microphone is also not muted there. Johnny: Thank you

-----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Tzafrir Cohen Sent: Sunday, October 16, 2005 2:59 AM To: asterisk-users@lists.digium.com Subject: Re: [Asterisk-Users] No Audio from Console but mpg123 from shellworksfine. >One possibility is that the volume is set to 0. aumix can be handy here. Does

icecast2 is a broadcast server and will broadcast both ogg vorbis and mp3 streams. This assumes that you have a source client which can produce an ogg vorbis and mp3 stream and send it TO an icecast2 server. With mp3 streams, shoutcast mp3 metadata is supported, however you cannot use the shoutcast DSP as a source stream to an icecast2 server. Current clients that we know about that can

Whenever I change the sound driver from ALSA to OSS in winecfg all of my steam games are muted. Some of the games doesn't even start, some of them start but are totally silent with OSS. I installed a couple of non-steam games into the same wineprefix, interestingly they can use both sound systems. So this issue is applied only to steam games. If I apply the WINEDEBUG=+dsound parameter when