similar to: Trying to stream to a Nanocaster/2.0 server

Hi Akos, --- Akos Maroy <darkeye@tyrell.hu> wrote: > well of course, the nanocast server uses some different login > protocol > than icecast or shoutcast. is there a site for this server? maybe a > spec > on the source login protocol? then I could add support for it to > darkice Hmm.. I thought nanocaster was similar to shoutcast? I can use the shoutcast plugin for

--- Akos Maroy <darkeye@tyrell.hu> wrote: > did you try it with darkice configured for shoutcast? e.g. a > configuration section [shoutcast-0]? Yes I did, but it never connected properly. This is the message: DarkIce 0.8 live audio streamer, http://darkice.sourceforge.net Copyright (c) 2000-2002, Tyrell Hungary, http://tyrell.hu Using config file: /usr/local/etc/live365.cfg Using

Tom Murphy wrote: > Hi all, > > I'm attempting to stream audio to a live365.com server, more > specifically, it is a Nanocaster/2.0 server: > > HTTP/1.0 200 OK > Server: Nanocaster/2.0 > Content-Type: audio/mpeg > Cache-Control: no-cache > Pragma:no-cache > Connection: close > Content-Length: 44000000> > I tried Liveice (XMMS plugin) and it

Hey, I've compiled DarkIce 0.6 dynamically linked to LAME 3.89. I'm running Slackware 8 and using gcc 2.95.3. Running DarkIce yields the following output: DarkIce 0.5 live audio streamer, http://darkice.sourceforge.net Copyright (c) 2000-2001, Tyrell Hungary, http://tyrell.hu Using config file: darkice.cfg Using POSIX real-time scheduling, priority 98 LAME version 3.89 (beta

Samuel, I had the same problem. I think it's because the port in darkice does not match the port icecast or shoutcast is listening on. I thought it was 8000 but it was actually 8001. Check that. Matt -----Original Message----- From: owner-icecast@xiph.org [mailto:owner-icecast@xiph.org]On Behalf Of Samuel Hathaway Sent: Friday, October 05, 2001 2:43 PM To: icecast@xiph.org Cc:

Can the bitsPerSample be set any higher than 16? I try to set it to 20 or 24 and get this error... DarkIce: LameLibEncoder.h:122: specified bits per sample not supported [24] teststream# <p>When I start Darkice I get the following error for about 5 seconds and then it stops with "broken pipe". 08:57:09: BufferedSink, new peak: 53112 08:57:09: BufferedSink, remaining: 28808

I recently installed icecast and iceS and all seems to be well. I have spent four days trying to understand and use darkice and finally gave up. Using darkice configuration: [general] duration = 0 # do it forever bufferSecs = 10 [input] #device=hw:0,0 device = /dev/dsp sampleRate = 22050 # 44100 or 22050 or 11025... bitsPerSample = 16 #16 bit samples channel = 2 # 1 for mono, 2 means stereo.

Does anyone know what tool I can use to update the stream metadata (like artist, title, etc..) while I use an app like DarkIce? I would like to be able to update the stream info with the track I play. I know that XMMS and its liveice plugin do that, but I'd rather use DarkIce and capture all the sound from the card. Thanks, Tom __________________________________________________ Do You

Hi All, I attempted to switch my MP3 server from Icecast 1 to Icecast 2 today. I run a Live365 station, Big Planet Radio, which simply relays my local Icecast server. My Icecast 2 error.log file shows a lot of the following messages when the Live365 server, Nanocaster 2.5.6, is connected to it: [2003-05-14 22:09:15] DBUG format-mp3/format_mp3_write_buf_to_client Client had recoverable error

Hi All, I attempted to switch my MP3 server from Icecast 1 to Icecast 2 today. I run a Live365 station, Big Planet Radio, which simply relays my local Icecast server. My Icecast 2 error.log file shows a lot of the following messages when the Live365 server, Nanocaster 2.5.6, is connected to it: [2003-05-14 22:09:15] DBUG format-mp3/format_mp3_write_buf_to_client Client had recoverable error

Tom Murphy wrote: > Hmm.. I thought nanocaster was similar to shoutcast? I can use the > shoutcast plugin for winamp on the windows side for it just fine. I did > a search on google and couldn't find anything about nanocaster. did you try it with darkice configured for shoutcast? e.g. a configuration section [shoutcast-0]? <p>--- >8 ---- List archives:

Tried rpm of DarkIce and got this... error: failed dependencies: libgcc_s.so.1 is needed by darkice-0.6-1 Also tried compiling straight from source and got this... c++ -DHAVE_CONFIG_H -I. -I. -I.. -O2 -Wall -c DarkIce.cpp In file included from DarkIce.cpp:78: LameLibEncoder.h:46:2: #error need lame/lame.h make[2]: *** [DarkIce.o] Error 1 make[2]: Leaving directory

dimanche 3 mars 2002, 23:05:21, Cédric Mallet a écrit : > I have installed DarkIce from the latest rpm version. > I get this error message when running it : > TcPSocket.cpp:197 : gethostbyname error > Does anyone know what it means ? <p>A hint : according to the man this function is linked to /etc/hosts, which contains only one line : 127.0.0.1 I replaced my DNS with my IP

Hi: I have some people who want to be able to broadcast using a shoutcast DSP plugin with MP3, to an icecast2 server. But we can't get it to work. Since I can't be bothered booting one of our boxes into windows to try the shoutcast DSP itself, I decided to use darkice in shoutcast mode. I know this works with shoutcast servers. anyway, it connects, but only briefly, and then is

I'm using liveice and lame on another stream... ample rate of 22050 bitrate of 24000 It has worked fine for over 9 months now...except it crashes all the time because of liveice I think. >>> darkeye@tyrell.hu 8/28/02 9:15:58 AM >>> Matthew Mencel wrote: > Can the bitsPerSample be set any higher than 16? I try to set it to > 20 or 24 and get this error... >

Akos, have tried to use the CVS for the last few days (following instructions on sourceforge) but it keeps timing out. Anything going on with the CVS Server? Gary. --- >8 ---- List archives: http://www.xiph.org/archives/ icecast project homepage: http://www.icecast.org/ To unsubscribe from this list, send a message to 'icecast-request@xiph.org' containing only the word

this is probably caused by the lack of buffering in icecast2. Their relay client may be doing some buffering in itself, and if it's expecting for there to be buffering on the server side as well, it might exhibit a behavior you are seeing....(that also is a difference between iceast1 and icecast2 - no server-side buffering in icecast2 and there was in icecast1)... fwiw, I am trying to

Gary Major wrote: > Does darkice or anything else allow you take the incoming audio from a > soundcard, but instead of encoding it and sending it to icecast, just encode > it and save it as a file instead? DarkIce not at the moment, though as of 0.8 you can save all what is sent to the server in a local file. <p>Akos <p><p>--- >8 ---- List archives:

This has come up earlier, but I don't remember a solution. How do I update the metadata of the stream 'on the fly'? I'm thinking of having a live stream (through darkice), with the title, author, etc. metadata changed every once in a while to reflect the actual program. How would I do that? Should I insert such data into the mp3 / ogg voribs data somehow by calling some

I can create a section in darkice with looks like [file-0] format = vorbis bitrateMode = abr bitrate = 48 fileName = /tmp/save.ogg Is there a way to start/stop recording without stopping all other streamer? per example - stop file recording - save file to another name - start recording ( regenerate the nessesary header for mp3 or ogg) maybe an HUP? Thanks.