similar to: The Shorewall list server is back on line

Hello All, Figured I'd ask this. I have an asterisk running with some X100P clones. The system runs fine. My question is, the lines are tied into a panasonic dbs analog extension. When you call through, all goes well except that the call does not know it is connected. This causes problems if lets say, I want to do a 3 way conference, since my cisco 7960 does not see the call as connected,

Hi, Someone released a succefull interconnection in H323 with WTL equipement ? I'm trying to do that with an IPNx. But get dead air. With chan_oh323 it's fine, all works. With chan_h323 => dead air. The configuration is GW to GW. This is my configuration from h323.conf: [general] port=1720 bindaddr=my.ipaddr dtmfmode=rfc2833

All, With the dual-ISP support in the latest versions of Shorewall, is it also possible to setup dual-VPN with something like OpenVPN? If so, what are the high levels steps that would need to be completed? Aaron

Hi all, We are investigating on firewall failover design. I have searched the net and found that projects like LVS have it mostly solved for their side but that netfilter lacks it. Of course, a simple failover of the firewall is available using things like VRRP (KeepAlive software) but without state syncronization, and that is preciselly the part we need to investigate. Is this issue

Hello List: Recently our shorewall FW server went dead (PS failure) & brought the entire system down. Luckily we are testing the FW and other servers, so we did not loose anything. Now we have decided to setup two Shorewall FW servers with a primary & another fallover FW server. I have done some research cruised the Internet and found that a product ''UCARP''

Hi, i have a problems with windows clients when they try to change the password, windows respond with "Please enter valid character..." but the pass get changed. i have this in smb.conf passwd chat = *Enter\snew\sUNIX\spassword:* %n\n *Retype\snew\sUNIX\spassword:* %n\n . when i change that to: passwd chat = *New*UNIX*password* %n *Re*ype*new*UNIX*password* %n

hi, there is no support for patch-o-matic netfilter modules. what i have to do if i want to use several patch-o-matic modules? which parts of code has to be changed and will that changed be included into the main shorewall tree in future or not? best regards claus

I have 2 firewall in HA with keepalived. Can I use active the same tinc configuration on 2 firewalls ? using tun Interface with same ip on all 2 nodes is a problem ? tun device advertise itself on the network having an IP/MAC pairs (ARP) or the IP is only used by the system internally for routing so using the same configuration is right ? so one firewall be active, the other is passive. With this

I have two Internet connections which connected to different ISP. one is for normal usage , 2nd one is for backup fault tolerance how do I implement fault tolerence multiple internet connections in shorewall ?

Hello, I am curious if the below setup makes any sense... If I have two public IP addresses served off of a cable modem, can I send one to a shorewall box in bridge mode, then have the other serve my network? Physically, I would like to run it: Cable Modem -> Shorewall Box -> Router -> Network Possible? I would like to do this using FC 4. thanks

Hi, I have HA firewalls configuration (keepalived) on one site. Each firewall has its own IP and a Virtual IP (VIP) that keepalived activate on one of the firewall (active/passive HA configuration). I think I can set all two firewalls with same configuration, generating key pairs on one firewall and copying that to the second, so the remote host can see always one of the other firewall as the

hello, all! if i want to use lvs function of keepalived , i must install ipvsadm ? tks! -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20110308/b8e27203/attachment-0002.html>

https://bugzilla.netfilter.org/show_bug.cgi?id=1381 Bug ID: 1381 Summary: Conntrackd segfaults when committing external caches Product: conntrack-tools Version: unspecified Hardware: x86_64 OS: All Status: NEW Severity: enhancement Priority: P5 Component: conntrack-daemon

I've searching the archives for 2 hours and cannot find somebody else with the same problem, so please don't kill me if this is a stupid question.. I instaled a Centos 5 Machine with the Samba3x packages of samba and winbind and joined it to a 2003 AD server domain. Do far, so good. wbinfo -t works wbinfo -u, -g works getent passwd and group also work. buuuuuuuuuuuut, groups are missing

Hi, list, I'm going to deploy postfix + dovecot + CephFS( as Mail Storage). Basically I want to use two servers for them, which is kind of HA. My idea is that using keepalived or Pacemaker to host a VIP, which could fail over the other server once one is down. And I'll use Haproxy or Nginx to schedule connections to one of those server based on source IP( Session stickiness),

Hi System debian 8.11 and dovecot-2.2.36.4 My webmail is roundcube with imapproxy. I have one problem. My dovecot servers is are in a cluster with keepalived like: dovecot1----VIP-IP--------dovecot2 All works fine I have a problem with imapproxy when a server dovecot1 had a problem (kernel panic sic!) Keepalived works perfecty and moved VIP to dovecot2 - all works fine for normal users but

hi list! i'm trying to find a convenient way to build a redundant filtering bridge under linux i looked at carp project, but carp doesn't support bridge now i thing the most appropriate way is using stp or rstp it seems that 2.6 kernel supports stp but what about rstp? I read some docs about stp, but they are rather outdated (2001 and kernel 2.2) there are several problems indeed: *

Hello GlusterFS users, can anybody give me please his opinion about the following facts and questions: 4 storage server with 16 SATA bays, connected by GigE: Q1: Volume will be set up as distributed-replicated. Maildir, FTP Dir, htdocs, file store directory => as sub dir's in one big GlusterVolume or each dir in it's own GlusterVolume? Q2: Set up the bricks as a collection of

Hey guys, I'm trying to install keepalived 1.2.19 on a centos 6.5 machine. I did an install from source. And when I start keepalived this is what I'm seeing in the logs. It's reporting that the VRRP_Instance(VI_1) Now in FAULT state. Here's more of that log entry: Sep 29 12:06:58 USECLSNDMNRDBA Keepalived_vrrp[44943]: VRRP Instance = VI_1 Sep 29 12:06:58 USECLSNDMNRDBA

Hi. Is anyone using conntrack-tools to implement gateway failover on a network with windows clients? I set it up with ucarp and keepalived, and found that gratuitous ARP doesn''t always seem to update the cache on Windows machines. It works the first time, but if a second failover happens, the client continues to send stuff to the wrong MAC address. Linux machines work fine.