similar to: help connection is dropping every 10min

Hi there, Let me just start by saying that I am a bit of a Linux newbie, but that Shorewall seems an excellant product. The issue I''m reporting wont stop me from using it, it still does 99% of what I need. Anyway, I have a resonably simple two interface system. My server (HatMannz, P3-900MHz with a RAID-1 array of 80GB IDE drives running Red Hat 9.0) connects to a cable modem via eth1

I have problem getting answer on http request from all my local subnets but not from local subnet. Ping and requests on ports 21 22 23 25 110 works fine. I logged port 80 in rules files and I got accept entry same for local subnet and other subnets. Local subnet is 192.168.6 Dec 29 09:52:40 zinfsrv2 kernel: Shorewall:loc2fw:ACCEPT:IN=eth0 OUT= MAC=00:09:6b:07:ca:cc:00:10:b5:fa:bd:71:08:00

Hallo, i have a problem to configure shorewall to enable scanning over the network with sane. The scanner is located at the firewall hosts local interface. Why do i get a "all2all" message and not "loc2loc" Aug 25 14:55:26 router saned[26946]: saned from sane-backends 1.0.11 ready Aug 25 14:55:26 router saned[26946]: check_host: access by remote host: 192.168.0.250 Aug

I''m attempting to setup Squid as shown on: http://shorewall.sourceforge.net/Shorewall_Squid_Usage.html#DMZ The firewall is a Bering 1.0 firewall running Shorewall 1.3.11, Red Hat 7.2 on the server in the DMZ. I''m not seeing the requests come in to the server using tcpdump. The server is 192.168.2.1 connecting to eth2 on the firewall, the local traffic I''m trying to

Problem: "Firewall" machine cannot get DNS but is allowing DNS through internally. Something changed with the configuration but we''re not sure what. Here is the pertinent info: Shorewall Status Entries Oct 5 09:24:50 all2all:REJECT:IN= OUT=eth2 SRC=192.168.7.55 DST=65.175.131.201 LEN=55 TOS=0x00 PREC=0x00 TTL=64 ID=50982 DF PROTO=UDP SPT=32973 DPT=53 LEN=35 Oct 5

My logs show thats: A internal client search my proxy (192.168.0.3) Oct 12 12:40:33 massayo kernel: Shorewall:all2all:REJECT:IN=3Deth1 OUT=3D MAC=3D00:e0:7d:82:0f:fe:00:04:75:99:28:63:08:00 SRC=3D192.168.0.215 DST=3D192.168.0.3 LEN=3D63 TOS=3D0x00 PREC=3D0x00 TTL=3D128 ID=3D25902 PROTO=3DUDP SPT=3D3028 DPT=3D53 LEN=3D43 Why OUT is empty? From: Server (DMZ) Oct 12 12:40:34 massayo kernel:

Hi, I have a proxy/firewall, I want to dnat requests for 193.205.140.106 on port 443 towards 10.2.15.23 and requests for 193.205.140.106 on ports 4330 and 3389 towards 10.2.15.25, these rules must apply from internet, loc and fw (some client use a proxy on fw to reach these servers) I have tried with the following rules: DNAT net dmz:10.2.15.23 tcp 443 -

[192.168.0.0/24 Lan] v [Shorewall box ''Curtain'', 192.168.0.254, DHCP to ISP, and a OpenVPN tunnel 10.4.0.2] v [Internet] v [Shorewall box ''statler'' 130.241.25.165, and an OpenVPN tunnel 10.4.0.1] Now, i have set a rule on statler ACCEPT vpn $FW tcp smtp and i have as below. root@statler:/etc/shorewall# cat zones | grep -v ^# net Net Internet

Hi, I am getting occasional rejected packets like so: Jul 31 09:52:03 firewall kernel: Shorewall:all2all:REJECT:IN=eth2 OUT=eth0 SRC=192.168.10.91 DST=132.147.22.6 LEN=48 TOS=0x00 PREC=0x00 TTL=127 ID=55364 DF PROTO=TCP SPT=1147 DPT=23 WINDOW=16384 RES=0x00 SYN URGP=0 Jul 31 09:52:46 firewall kernel: Shorewall:all2all:REJECT:IN=eth2 OUT=eth0 SRC=192.168.10.26 DST=10.9.100.30 LEN=48 TOS=0x00

I am trying to set up my Shorewall box to forward multicast packets to my local net. I do have some problems with mrouted (see below), but I can join and add routes using smcroute. Multicast works when shorewall is disabled. I got a lot of help from the following. http://lists.shorewall.net/pipermail/shorewall-users/2005-January/016674.html I cannot get the multicast packets to pass the fw when

Greetings all, I have just install Shorewall on a Debian system and I''m using it as a firewall on an internal network. The specifics of the system are as follows: firewall:/var/log# shorewall version 3.0.4 firewall:/var/log# uname -a Linux firewall 2.6.12-1-386 #1 Tue Sep 27 12:41:08 JST 2005 i586 GNU/Linux Shorewall start successfully and $FW can connect to the Internet for upgrading

Hi My situation: I have two pc''s with public ip''s (192.159.56.206(webserver) and 84.196.123.65(mail-gateway)) in the dmz. The firewall (84.196.123.66) is configures with proxyarp, so nothing is changed on the pc''s from when they were not behind the firewall (i.e. they don''t have the firewall as gateway (and they each have different gateways, only 84.196.123.65

Hello, I was helping a friend to extend his Shorewall firewall and noticed something strange in the syslog Shorewall:all2all:REJECT:IN= OUT=eth1 SRC=192.168.0.1 DST=192.168.0.2 LEN=39 TOS=0x00 PREC=0x00 TTL=64 ID=3021 DF PROTO=UDP SPT=44337 DPT=1503 LEN=19 Anybody got an idea what this can be? -- Groeten, Peter Device response received when none expected. - - Heb je een Dreambox 7000S ?

I have searched your FAQ''s and read the documentation on your site as well as googling. I am not able to figure this out. If you have any ideas can you please help. I am using the linux-ha failover with redundant firewalls. As part of the function of the linux-ha software consists a service called heartbeat which is a connection from each failover node through a serial cable or ethernet.

Hi, I have a install of shorewall I have 2 interfaces(I think) ppp0[connection device] and eth0 [LAN device], I want to allow all traffic from the the internet in or aleast port 80 and CVS and webmin and mail and everything normal to the main machine with shorewall on it. I changed to policy file but it just gave me errors as to double interfaces. I also what still to alow connection sharing

Currently I have shorewal 2.2 installed om my debian 2.6.8 kernel. The firewall machine can access the internet via a ethernet modem fine. The firewall can ping the local network. The local network can ping the firewall server, see the samba files. Howeven teh local network cannot access the internet through the firewall Any suggestions? Rob van Overbruggen Settings and stats: Server: Eth1 :

Dear List! I use a shorewall 2.0.8 on a Debian sarge system. I use a DSL connection to the Internet (ppp0 - eth1 to the modem) and a bridge to the local lan. The bridged config i''ve made with bridge.html from the shorewall site. The Bridge is between local net and a openvpn tap device. This works. I ccan make tunnels, and a can make a lot of things through the firewall. I can get a list

Believe me: Read the FAQ Checked over and over This might be toooooo stupid to be documented. Please bear with me. Any help ? Situation: single card standalone "firewall" (used like a "personal firewall"). Have sshd running on the FW. Want the sshd daemon to be accessible only from 2 LANs: 1) My other home LAN machine 2) IBM intranet machines (9.0.0.0) Whatever I have

My dcgui-qt (chat/file-sharing program) doesn''t work and I''m pretty sure it''s my firewall settings. dcgui-qt is a direct connect (file sharing & chat) client. According to the FAQ here (http://dcplusplus.sourceforge.net/faq/faq.php) all I should need to do is: ------- #ACTION SOURCE DEST PROTO DEST SOURCE ORIGINAL #

I have what strikes me as an odd problem with shorewall. Let me describe my setup. My desktop (alfred) is connected to the network through an ADSL modem. I am running rp-pppoe, and this works perfectly. I have a small home network, with two LANs; an Ethernet LAN (including a machine running Windows XP), and a WiFi LAN, including the laptop (william) I am using now. All the computers except for