similar to: SysV install problem in FC4

Hi folks, I''m conducting a straw poll for your opinions on whether we should send CVS commit logs (probably with diffs) to the shorewall-devel list, or to another (new) list? I can see advantages to both ways: separate lists mean that people who aren''t contributing code don''t get flooded with code noise, but a single list will help keep everyone involved in the

Hi all, Does anyone run Asterisk on FC4? with Digium's TDM40B cards. any success stories? my Intel 865 M'd+ Intel 3.0GHz freezee during installation (FC4). Please any comments? Kumara

After more investigation, I decided to just recompile asterisk (on my newly upgraded Fedora core 4 system). Make dies with this error: "No rule to make target 'usr/lib/gcc/i386-redhat-linux/3.4.3/include/stddef.h" It seems this directory is gone under FC4, and replaced by No rule to make target 'usr/lib/gcc/i386-redhat-linux/4.0.0/include/ I can't find the

Is anyone running FC4 SMP domU''s? I don''t recall if I tested this before and today I noticed that I can only bring up FC4 domU''s as UP even though vcpus = 2. xm list and /proc/cpuinfo are in agreement :-) Regards, Ted _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Greetings! I am currently building a PXE distro server for a company that I'm contracting for, but I'm having some problems. Here's the scoop: Some of the clients I want to install on are Angstrom blades with Intel e1000 NICs. Using the pxelinux.0 file on the FC6 distro, I can install FC6 just fine. However, FC4 bombs. The system pulls it's DHCP address just fine, and then

Can someone point me to a step-by-step on samba w/FC4? Honestly, I'm only trying a basic share, no rocket science. I've already a samba server on RH9 with the same clients and users trying to access a share on FC4. Logs and testparm returns everything fine. Had SELINUX on and off. Cannot browse even home directories. Thanks, exasperated

Hello, The package builds successfully on RHEL5 and OS X( 64 bit,32/64 respectively) but on FC4(32 bit) it fails with this error g++ -m32 -I/usr/include/R -I/usr/local/include -fpic -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic -fasynchronous-unwind-tables -I. -g `pkg-config --cflags protobuf` -Wall -c

Hello, I was wondering about the feasibility of including a startup script for icecast for redhat/fedora installs? I've had to do an rpm install on an fc4 box, and a source install, rpms couldn't be found for an rh9 machine, yah i know that's old. And in both cases i had to drop in a custom-made startup script, see below. I was wondering esepcially in the case of the rpm, and

Greetings to all. I am hoping someone can help me out with a problem I am having getting my Cisco phones, 7960s and 7940s, to download the appropriate files from our TFTP server. The TFTP server is running on Fedora Core 4. The TFTP server appears to be setup properly: service tftp { socket_type = dgram protocol = udp wait =

I have a Laptop with 6G HD, there are FD and CD-ROM port to external devices. But I only have a external floppy drive, no cd-rom. Now I boot from 1fd linux and make HD as partition, next I want to install FC4 on this laptop. But FC4 CD only support CD-ROM or USB memory, I tried to write diskboot.img to /dev/hda1 with dd command, I found all files in image bootdisk.img in /dev/hda1, but when I

hi everyone, I've been subscribed to the mailing lists for about 18 months to 2 years but have never had the opportunity to post. One of our clients has a box that is a 3Ghz Pentium 4 running FC1 and 512 MB of memory. An upgrade was performed to FC4 [2 make use of ACL's]. We haven't yet started to implement ACL's [or made any changes to the Samba configuration]. The problem we

The system is FC4 with the latest upgrades installed. Wine is 0.9.5. The latest wine is doing the best at running Office in a long time. Word seems very stable. That said excel is hanging on the splash screen. This in an old symptom that keeps re-occurring. DCOM is installed correctly. Does anyone know what the cause of he splash screen excel is? Thanks - Dan

I am tasked with installing xen on a FC4 machine. I went ahead and followed the fedora xen howto, however when I rebootrd into the dom0 kernel I would get a page full of hda: lost interrupt followed by a blank screen. I then decided to remove all that and go with a xen-testing from source build. Now when I do "make tools" in the -testing directory I get: [...] In file included from

Hi, I upgraded my system from FC4 to FC5. So now I have R version 2.5.0 (2007-04-23). But I ran into a problem with starting device X11 (message below). > X11() can't find X11 font Error in X11(display, width, height, pointsize, if (is.null(gamma)) 1 else gamma, : unable to start device X11 Any idea? Thanks, L. -- Li-Jung Liang, Ph.D. Department of Biostatistics UCLA

Hey folks; I have been happily using shorewall for quite some time so this problem _may_ not be easy to resolve but I am interested in any information regarding your experience with the same setup. I was using FC3 with shorewall 2.2.3 and two NICs setup as a bridge without any issue until I upgraded to FC4. My production system would pass traffic through the bridge but local usage would not

Dear List, A few weeks ago a discussion took place regarding Fedora Core 4 and compiling R on that platform using the new version 4 of gcc and its gfortran compiler. gcc was recently updated to 4.0.1 on FC4 (4.0.1-5 in Red Hat Land) so I thought I'd give compiling R a go on my laptop which needed updating anyway. I've had trouble using the optimisation flags I used to use under FC3 with

I have followed a number of fast cgi tutorials to get it installed on FC 4 with ruby but not sure where I went wrong. Which is the best FC4/Rails/Ruby/Apache/FastCGI wiki out there? I worry that because I have tried a few now that a simple "monkey at the keyboard" approach of going through the install may not be enough to save myself from really diving in and understanding it all :)

Dear All, I have server with a 160G disk with one partition /dev/hde1. The PC had FC1 and everything was working fine. I decided to do an upgrade to FC4. Now I can no longer mount that partition. I don't think anything happened to the file system, but changes in kernel and modules due to the upgrade is now making it inaccessible. I tried: mk2fs -n /dev/hde1 got a list of

It seems nice that R is part of the 'walled garden' of applications specifically configured to run under Fedora Core 4 (Linux). The gnomeGUI has a separate installation routine under FC4 and yum tells me it's installed. I've even found an executable for it in /usr/lib/R/bin/exec. However, as far as I can tell, it doesn't do anything. Since the documentation is rather...