similar to: OGG Vorbis I

Hi,all I don't quite understand why vorbis I spec dictates that "Ogg stream must be unmultiplexed". Ogg can include both audio and video, that means one Ogg stream can both have vorbis and theora multiplexed. How vorbis I spec say could not allowed? Thanks! Best Regards, Emily Gao Tel:86-21-38764688 ext:6392(WWID 0760) VIA-VEPD-APP-CODEC -------------- next part

Hi! I don't find any detailed information about this in the specification, so I try a question here. If two plain, unmultiplexed Ogg/Vorbis-files are chained into one file, you end up with an Ogg-file with two logical Vorbis streams. When playing this file, would it be correct for a decoder to synchronize the two streams according to the granule position of the Ogg pages (playing them

I am little confused over what Vorbis I specification states and ogg logical and physical bitstream overview document.( http://xiph.org/vorbis/doc/oggstream.html) I am quoting here the Vorbis I specification "The Ogg/Vorbis I specication currently dictates that Ogg/Vorbis streams use Ogg transport streams in degenerate, unmultiplexed form only. That is: *A meta-headerless Ogg le

findfs in F12 finds partitions on /dev/sdX devices instead of /dev/mapper/<wwid> devices. This sets an option that forces findfs to scan instead. Signed-off-by: Mike Burns <mburns at redhat.com> --- recipe/common-post.ks | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-) diff --git a/recipe/common-post.ks b/recipe/common-post.ks index 9243751..0a2e180 100644 ---

Hi, In the article Hierachical token bucket theory says that "Just look at the self feed list and select the nonempty slot (one with a line) with lowest level and highest prio." Then I wonder that if the highest priority class is always in the "CAN SENT" mode, the other classes will have less opportuinity to send packet? Becase they have to wait the hightest priority class

dm-* devices are references to existing /dev/sd* and /dev/mapper/<wwid>. We should not depend on them and only present /dev/sd* and /dev/mapper/<wwid> to the user. Signed-off-by: Mike Burns <mburns at redhat.com> --- scripts/ovirt-config-storage | 5 +++-- 1 files changed, 3 insertions(+), 2 deletions(-) diff --git a/scripts/ovirt-config-storage

Hello, mtx and therefor amanda use generic device /dev/sg<x> for tape changer. These devices change on reboot. How to make them persistent? /dev/sch0 and /dev/sch1 seem to be persistent. /dev/tape/by-id/ shows links from WWID to generic device An UDEV rule could help? I have not found any example. -- Viele Gr??e Helmut Drodofsky Internet XS Service GmbH He?br?hlstra?e 15 70565

Greetings, I am trying to wrap my head around on this topic. Was wondering : Just as there is some scope for mapping ipv4 directly into IPV6 space, Is there a MAC ID or some kind of WWID has also been taken into consideration? Regards, Rajagopal

Hi, I have a host which is connected to SAN via single Fibre channel HBA (qlogic). I have several LUNS assigned to this (sdc, sdd). I added another single port HBA to this host. I can now see two world wide names. Now the confusion is which world wide name does sdc and sdd is/was using. scsi_id -g -u -s /block/sdc only gives wwid but I need the wwn for sdc and sdd. Thanks Paras.

Hello Ron, sounds good. I have 2 tape changer. I persume, udev creates the same link for both. Can I modify SYMLINK+="changer-$env{ID_SERIAL}" The serial should be unique. Viele Gr??e Helmut Drodofsky Internet XS Service GmbH He?br?hlstra?e 15 70565 Stuttgart Gesch?ftsf?hrung Helmut Drodofsky HRB 21091 Stuttgart USt.ID: DE190582774 Fon: 0711 781941 0 <tel:+497117819410> Fax:

Hi All, I created a new rails application using rails 1.0. I used "ruby script\generate scaffold" for each of my tables. This worked on all but 2 of my tables. When I go to the new or edit action of my requests or admins table, I get the error below. On one table called admins I hadn''t followed the correct naming convention and wasn''t able to edit or create

On Tue Feb 16 03:35:06 PM, John R Pierce wrote: Thanks to both you and Mark Roth for chiming in and thank you for the lsi-raidinfo script. > On 2/16/2016 3:23 PM, Zube wrote: > >Does anyone know what program can be used to query the RAID status > >from the OS for an on-board LSI SAS 2308-4i? > > the 2308 isn't actually a megaraid, Right, that is in agreement with both

On Thu, 2019-02-07 at 10:56 +0100, Helmut Drodofsky wrote: > Hello, > > mtx and therefor amanda use generic device /dev/sg<x> for tape > changer. > > These devices change on reboot. > > How to make them persistent? > > /dev/sch0 and /dev/sch1 seem to be persistent. > > /dev/tape/by-id/ shows links from WWID to generic device > > An UDEV rule

I've taken you as far as I can go. ?Now you will have to experiment a bit for your use case. ?I should point out that at least in my system, the link with the serial number in it shows up even with the line commented in the rules file. As always, YMMV. On Thu, 2019-02-07 at 22:29 +0100, Helmut Drodofsky wrote: > Hello Ron, > > sounds good. I have 2 tape changer. I persume, udev

Hopefully someone can help get multipath working inside a domU. I'm using Xen 4.2.3 on a SLES 11 dom0, and both a SLES11 domU and a CentOS 6 domU. I'm using NPIV to connect my SAN disks to my domU, and, due to the way my SAN presents the LUNs, need to use multipath inside the domU. I've tried this on both SLES11 and CentOS6 with pretty much the same result. The root issue seems to

Hi, I want to share a partition of an external disk between 3 machines. It is located on a Sun StoreTek 3510 and bound (via multipathing) to all 3 machines. One machine (say mach1) is the node I used to create the filesystem and setup /etc/ocfs2/cluster.conf. I copied the file to the other 2 machines. All use the same /etc/multipath.conf[1], too. All start /etc/init.d/ocfs2 at boot, all are

All: ~> uname -srvmpio Linux 2.6.32-358.18.1.el6.x86_64 #1 SMP Wed Aug 28 17:19:38 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux ~> rpm -qa kernel\* | sort kernel-2.6.32-358.18.1.el6.x86_64 kernel-2.6.32-358.el6.x86_64 kernel-devel-2.6.32-358.18.1.el6.x86_64 kernel-devel-2.6.32-358.el6.x86_64 kernel-firmware-2.6.32-358.18.1.el6.noarch kernel-headers-2.6.32-358.18.1.el6.x86_64 My department has

Dear all, actually I installed CentOS 5.4 x86_64 on 11 new Dell R710 servers. It is required to use 5.4 to be covered by the NetApp Interoperability Matrix for use of Snapdrive. All systems spit out the error message mpt2sas0: failure at drivers/scsi/mpt2sas/mpt2sas_scsih.c:4637/_scsih_add_device()! at boot time. In dmesg the complete SCSI initialization logging appears as follows: SCSI

I am attempting to get multipath working with device-mapper (CentOS 4.2 and 4.3). It works on EVERY install of mine from RH (also v4.2, 4.3), but the same multipath.conf imported to all my installs of CentOS do not work. Note that I have tested a working 4.2 configuration file from RH on CentOS 4.2 and a working 4.3 configuration (it changed slightly) on CentOS 4.3. Neither worked. Our production

All other patches from the sequence remain unchanged. Repost of patch 6 based on comments from Joey to follow. Mike