Displaying 20 results from an estimated 2000 matches similar to: "libogg++ seeking w/o metric"
2007 May 02
2
libogg++ release 0.1.1
On 02/05/07, Elaine YueLien <et@ihear.com> wrote:
> Hi,
>
> Several months ago, I asked a question about seeking without a metric.
> You can find one answer in this beta release, demonstrated in the
> example program multiThreadSeek. There is also an example demuxer, and a
> rewriter.
Hi Elaine,
congratulations :-) that's a nicely designed API you've got there.
2009 Jun 04
3
libogg++ release 1.1.0
Hi everybody,
I posted here about two years ago about the initial release. This is a
release that fixes many bugs, and has enhancements that make it possible
to support a multi-stream format, ALingA, which I will mention briefly
later. It also supports a PCM format, Neuro, both as part of the
multi-stream codec, and stand-alone.
libogg++ is a C++ library implementing Ogg. It is designed to be
2007 May 02
0
libogg++ release 0.1.1
Hi Conrad,
Just a word of thanks to you and other authors at xiph for your work.
libogg++ is not meant to duplicate functionality that libogg and liboggz
already provide. Rather, it offers a different partitioning of logical
from transport, and is oriented to threaded execution.
On Wed, 2007-05-02 at 20:42 +0900, Conrad Parker wrote:
> Just to make sure we're not using the same word to
2009 Jun 05
2
libogg++ release 1.1.0
(Sorry, Sylvia, about the duplicate, hit the wrong reply button.)
On Fri, 2009-06-05 at 08:07 +1000, Silvia Pfeiffer wrote:
> Hi Elaine,
>
> I flipped through some of the code but wasn't really about to
> determine this: Do you also support Skeleton in libogg++ ?
Hi, Silvia. I studied your multi-track work when I was working on
ALingA. It was a valuable guide.
No, libogg++ tries
2009 Jun 04
0
libogg++ release 1.1.0
Hi Elaine,
I flipped through some of the code but wasn't really about to
determine this: Do you also support Skeleton in libogg++ ?
If you are creating multitrack Ogg files, they should contain a
skeleton track to identify the different contained tracks.
http://wiki.xiph.org/OggSkeleton And if the files aren't audio or
video files, you should then use the extension .ogx
2009 Jun 08
0
libogg++ release 1.1.0
On Sat, Jun 6, 2009 at 6:23 AM, ter<et at ihear.com> wrote:
> (Sorry, Sylvia, about the duplicate, hit the wrong reply button.)
> On Fri, 2009-06-05 at 08:07 +1000, Silvia Pfeiffer wrote:
>> Hi Elaine,
>>
>> I flipped through some of the code but wasn't really about to
>> determine this: Do you also support Skeleton in libogg++ ?
> Hi, Silvia. I studied
2009 Jun 08
2
libogg++ release 1.1.0
On Tue, 2009-06-09 at 00:12 +1000, Silvia Pfeiffer wrote:
> On Sat, Jun 6, 2009 at 6:23 AM, ter<et at ihear.com> wrote:
> >> If you are creating multitrack Ogg files, they should contain a
> >> skeleton track to identify the different contained tracks.
> >> http://wiki.xiph.org/OggSkeleton
> > ALingA is a multitrack format
> >
2009 Jun 09
3
libogg++ release 1.1.0
On Wed, 2009-06-10 at 00:00 +1000, Silvia Pfeiffer wrote:
> > My applications are in speech processing. I have been using the .ala
> > extension (has sort of a ring to it). There is a small database in the
> > FreeCLAS project that has been dispensing .alas to the public. But not
> > to worry, it has not attained social networking status. I am about to
> > update it
2009 Jun 09
0
libogg++ release 1.1.0
On Tue, Jun 9, 2009 at 9:23 AM, ter<et at ihear.com> wrote:
> On Tue, 2009-06-09 at 00:12 +1000, Silvia Pfeiffer wrote:
>> On Sat, Jun 6, 2009 at 6:23 AM, ter<et at ihear.com> wrote:
>> >> If you are creating multitrack Ogg files, they should contain a
>> >> skeleton track to identify the different contained tracks.
>> >>
2008 Nov 03
0
No subject
BTW: I am acutally started to implement the ogg skeleton handling ...
- Yorn
> Hi everybody,
>
> I posted here about two years ago about the initial release. This is a
> release that fixes many bugs, and has enhancements that make it possible
> to support a multi-stream format, ALingA, which I will mention briefly
> later. It also supports a PCM format, Neuro, both as part of
2013 Sep 27
3
Compare species presence and absence between sites
Dear List,
I want to compare the presence and absence of bird species based on the
sites in a matrix.
The matrix has 5 rows for Island A, B, C, D, and E.
It has 100 columns for bird species D001-D100.
In each cell of the matrix,
the presence-absence of bird species will be recorded as 1 or 0.
(For example, if species D001 is found on Island D,
the matrix cell of species D001 and Island D
2013 Apr 17
1
failed to download vegan
Hello,
This is Elaine.
I am using R 3.0 to download package vegan but failed.
The warning message is
package ‘vegan’ successfully unpacked and MD5 sums checked
Warning: unable to move temporary installation
‘C:\Users\elaine\Documents\R\win-library\3.0\file16c82da53b1b\vegan’ to
‘C:\Users\elaine\Documents\R\win-library\3.0\vegan’
I cannot find the folder \file16c82da53b1b\ below
2012 Dec 16
3
averaging X of specific Y (latitude)
Hello
I have a table describing butterfly range traits.
It is composed of three columns as below
Species name range size (X) latitude of range midpoint (Y)
There are 11 kinds of butterflies.
Each has its range size, and the latitude of each range midpoint ranges
from 9 to 19.
I would like to have the average range size of every degree of latitude.
For example, the average range
2013 Sep 20
3
search species with all absence in a presence-absence matrix
Dear list
I have a matrix composed of islandID as rows and speciesID as columns.
IslandID: Island A, B, C….O (15 islands in total)
SpeciesID: D0001, D0002, D0003….D0100 (100 species in total)
The cell of the matrix describes presence (1) or absence (0) of the species
in an island.
Now I would like to search the species with absence (0)
in all the islands (Island A to Island O.)
2012 Sep 24
3
boxplot of different colors
Hello,
I am making a boxplot of 13 boxes.
I tried to color the box using 13 colors but failed.
Only red and brown were displayed.
Green, blue, and grey disappeared.
Please kindly advise modification after checking the code below.
Thank you in advance.
Elaine
R code
# data input
dataN
<-read.csv("H:/a_mig_distance_B_NB/R_data/Mig_bird_586_20120925.csv",header=T,
row.names=1)
2011 May 23
2
[Cortado] How to support seeking in on-the-fly generated Theora stream?
Hello all!
i want to use Theora in a little video portal, because its free and open
source and i want to contribute some code to get the Java Theora player
(Cortado) more feature-rich.
But now I'm stuck and hope that someone can point me into the right
direction.
I have videos stored in several formats (mostly H.264 or MPEG4) and use
ffmpeg2theora to recode them on the fly. The recoded
2012 Sep 28
2
changing outlier shapes of boxplots using lattice
Hello
This is Elaine.
I am using package lattice to generate boxplots.
Using Richard's code, the display was almost perfect except the outlier
shape.
Based on the following code, the outliers are vertical lines.
However, I want the outliers to be empty circles.
Please kindly help how to modify the code to change the outlier shapes.
Thank you.
code
package (lattice)
dataN <-
2010 Jan 02
2
Boxplot- input the median point and the median value
Dear,
I am a newbie to R.
Now I am learning to draw boxplot using graphics().
I want to highlight the median position
with a round point and the value left (or on the top of)to the point.
Please kindly share the command and thank you.
Elaine
[[alternative HTML version deleted]]
2013 Jan 08
4
error in a abline loop
Hello
I have data of body length and body weight of people of different skin colors.
I tried to write a code to plot body length and body weight according
to the skin colors.
(Thanks for Petr's advice so far.)
A loop is used but an error shows up in the following code.
It says:
unexpected '}' in
"
2013 May 05
1
slope coefficient of a quadratic regression bootstrap
Hello,
I want to know if two quadratic regressions are significantly different.
I was advised to make the test using
step 1 bootstrapping both quadratic regressions and get their slope
coefficients.
(Let's call the slope coefficient *â*^1 and *â*^2)
step 2 use the slope difference *â*^1-*â*^2 and bootstrap the slope
coefficent
step 3 find out the sampling distribution above and