similar to: SPEEX_PREPROCESS_SET_ECHO_STATE produces heap corruption

As for me - speex_echo_cancellation is a better choise. Try using it in capture thread instead of those speex_echo_capture and speex_echo_playback functions. And please, describe your problem in details. Cause the fact that you "didn get echo cancellation" doesn't mean you are doing smth wrong. Regards, Anton A. Shpakovsky -----Original Message----- From: speex-dev-bounces at

Hello, i'm adding echo cancellation to my voip application, but when i call speex_echo_capture() or speex_echo_playback() causes an assertion failed, it seens that there is a delete in any where. i've encapsulated echo canceller in a class that storage the state and simply call the functions: void EchoCanceller::Playback(short *echo_frame) { speex_echo_playback(echo_state,

Hello all. A few questions on using speex's echo cancellation, for clarifying: 1) I assume that the echo_frame in this method: speex_echo_playback(echo_state, echo_frame) is just raw "pcm_s16le" type bits/data? I'm a bit new to all this... 2) I assume from this thread: http://lists.xiph.org/pipermail/speex-dev/2009-March/007151.html that speex_echo_playback and

2006/11/2, Jean-Marc Valin <jean-marc.valin@usherbrooke.ca>: > > Today I tried speex echo cancellation on my VoIP application running > > on a windows mobile based PDA (OMAP1510 168MHz). The result is > > disappointing: it takes 150-250 ms to do echo cancellation (by calling > > speex_echo_capture() ) for a 20 ms frame! > > Are you by any chance using an insane

Hi Jean Marc, We are running the speex echo canceller code on a Windows Mobile smartphone using a TI OMAP 201MHz 850. We are making voip calls and audio is working without echo canceller code. Simply adding the following 2 functions whether the echo cancellation is wired in (ie we use the output frame ) or not performance becomes terrible. Note 2 separate threads are used to handle audio.

Hi Folks, I am having trouble using speex_echo_cancel. As a starting point, I am using the testecho.c source code. I compiled the 1.2beta1 version. I have not tried any other versions of speex. The document says that the order of arguments to Speex_echo_cancel is (echo_state, input_frame, echo_frame, output_frame, residue) where "input_frame" is as captured from mic and

Hi Anton Thanks for the info... What if I use this function do I still need to sync the playback and capture? Assuming that the captured voice (*rec) already contains the echo which I need to cancel out... -------------------------------- void speex_echo_capture (SpeexEchoState *st, const spx_int16_t *rec, spx_int16_t *out) Parameters: st Echo canceller state rec signal

Anton A. Shpakovsky <saa <at> tomsksoft.com> writes: > > As for me - speex_echo_cancellation is a better choise. Try using it in > capture thread instead > of those speex_echo_capture and speex_echo_playback functions. > > And please, describe your problem in details. Cause the fact that you > "didn get echo cancellation" > doesn't mean you are

hi, I tried to encode the voice data read from AudioQueue and then decode it. There was nothing but rhythm left, it sounds like robot's voice, but I cannot recognize any word. The app was compiled by XCode 4.1. Speex 1.0.5 and 1.2.rc1 gave the same result. When compiling speex 1.0.5, I added them to Xcode project, set the Header Search Paths, then compiled successfully. When compiling speex

Simply to say, in a quiet room, you can play a impulse signal and then find it's impulse response signal from the microphone. For example, if the delay between the impulse signal and its response signal range from 500 to 3000 cycles, you can buffer the far-end signal to 0-300 cycles and set the filter length to 4000. It is also called to align far-end signal and near-end signal. BTW: Speex

Well, I'm not a professional in AEC theory, but what I've mentioned is: speex_echo_state_init(20, 320*10) - frame size should correspond to 20ms. At your sampling rate (16000hz) is should be 16K*0.02 = 320. The same I can notice about echo tail. 100ms: 16000*0.3 = 4800, not 3200 as you has. But that's not crucial I think. Just wanna you get the point. "Internally,

Hi, my VoIP system uses speex with framesize = 160 samples(20 ms) at 8khz, sending and receiving paquets of 1600 samples(200 ms). When I receive a packet, I buffered it (I have also tried with speex_echo_playback) before sending to the speaker. When I capture from microphone, I fist remove DC offset (I saw in OPAL sources) and then I call speex_echo_cancellation for every one of the 10

I am trying to compile speexclient.c. I downloaded all the files to ~/speex- 1.2beta1/include When I call ./compile.sh I get the following errors, speexclient.c: In function 'main': speexclient.c:164: error: 'SPEEX_PREPROCESS_SET_ECHO_STATE' undeclared (first use in this function) speexclient.c:164: error: (Each undeclared identifier is reported only once speexclient.c:164:

>>>> Hi, >>> >>> I have a scenario in a mobile VoIP app that requires echo cancellation but >>> is somewhat different from what's described in the docs. >>> >>> Audio is received from and sent to the network at 8000Hz. Each packet >>> contains 160 samples worth a playback of 20ms. >>> >>> But the hardware

I did the test on another PDA which runs XScale 416Mhz CPU, the EAC arithmetic could be done in 1ms, but for the previous PDA (TI OMAP 168Mhz), it take more than 100ms! Though EAC could run in time on the new PDA, it did no help to cancel the echo, here is my test scenario: Init echo_state: echo_state=speex_echo_state_init(160,1120); int tmp=8000;

>jesus: > Now I see that it happens when I specify a framesize in > speex_echo_state_init greater than the one used in > speex_preprocess_state_init. > > Next combination works: > codec framesize = 160 > preprocessor framesize = 160 > eco framesize = 160 > > > Next combination DOESNT work (produces heap corruption): > codec framesize = 160 >

Hi Jean-Marc and all others! I am having some troubles with the echo cancellation feature of speex in a voip project. I have two threads, one for sound input and one for sound output. In the output thread, I call speex_echo_playback(). or every frame sent to the sound card. In the input thread, I call speex_echo_capture() for every frame captured from the sound card. Also, I do

Hello all, Today I tried speex echo cancellation on my VoIP application running on a windows mobile based PDA (OMAP1510 168MHz). The result is disappointing: it takes 150-250 ms to do echo cancellation (by calling speex_echo_capture() ) for a 20 ms frame! I've defined the FIXED_POINT macro. Is there anyway to do some optimization? Nick

hello jean-marc and everybody, I keep getting no results when trying to use speex_echo_capture, speex_echo_playback and speex_echo_cancel in a multi-threaded application, as suggested in the manual. Though, the cancellation works properly when i use a file with human voice for far-end input and the same file with echo added in SoundForge for mic input. When i try to insert and remove silence

Hi, I am attempting to port the speex library to TI Davinci DM35x Family. My questions are: 1. What is the best ./configure option for it? Is it ARM5e / ARM4 ? when I tried these two the during the compiled a warning "I suppose you can have a [ARM4/ARM5E/Blackfin] that has float instructions?" 2. is there any available demos for the echo cancellation because I can get it