similar to: cannot hear a 1Khz tone with speex

Hello, in my project im using speex 1.2rc1 and the preprocessor VAD seems to only separate complete silence from not complete silence frames. The Speex Manual, you can read "The voice activity detector (VAD) provided by the preprocessor is more advanced than the one directly provided in the codec." but if you go to the source code in preprocess.c line 995 "/* FIXME: This VAD

Could a method be added to use the VAD from the preprocessor to send the packet with the 'dtx_enable' flag in it, so the decoder on the other end knows it's in dtx mode? (and SPEEX_GET_DTX_STATUS returns 1) At the moment, I can hack around it by doing something like: if (VAD for prev frame && ! VAD for this frame) { iArg = 0;

Hi,I'm having performance issues encoding with speex on an iphone4 + iOS5. The same code yields excellent results on iPad2 + iOS5, Mac OS X 10.6 as well as Windows 7. The call to speex_encode_int is takes 0.0065 to complete. Because encoding is so latent the receiver incurs underruns. Here is my speex setup: ? ? unsigned val = 0; ? ? /**? ? ?* Initialize the encoder in narrow band mode.? ?

I bought a ADSP-BF533-EZkit-LITE V2.1 to develop a speech codec application using SPEEX. I have tested SpeexEcho project from both BlackfinSDK-Rel201 and BlackfinSDK-Rel310. When disabling SPEEX processing, i.e. using PASS-THROUGH mode, the output voice is ok, which is exactly as the input voice. However, when enabling SPEEX processing, the output is bad, no matter how to set the parameters in

Hi, I encoded file in a ipaq 1940, pocket pc 2003, processor Samsung s3c241(similar to ARM), 266 Mhz. I would like to know your opinion for the quality output if this is right to entered parameters. File original: http://padawan.ing.puc.cl/chavezorig.wav File encoded: http://padawan.ing.puc.cl/chavezq1.wav The parameters for encoded are: state = speex_encoder_init(&speex_nb_mode); int tmp=0;

On 2010-04-11 10:09, Randy Yates wrote: > If I specify VBR mode via > > speex_encoder_ctl(pSpeexEncoder, SPEEX_SET_VBR,&isTrue); Try: speex_encoder_ctl(pSpeexEncoder, SPEEX_SET_ABR, &desiredRate);

Jesus, Unfortunately, FFT and magic algorithms don't work (yet?). You might want to try this if you're not satisfied with Speex VAD: http://lists.xiph.org/pipermail/speex-dev/2008-August/006860.html It won't perform any miracles, but I think it works pretty well and is easy to tweak. Tom >---- Original Message ---- >From: jmorion at toomeeting.com >To: speex-dev at

Hi, I'm trying to cover all Speex configuration options to set quality/mode/bitrate in my application and I was wondering if the following all makes sense: - abr_bitrate - use average bitrate and set it using bitrate parameter - SPEEX_SET_ABR - cbr_bitrate - use constant bitrate and set it using bitrate parameter - SPEEX_SET_BITRATE - cbr_mode - use constant bitrate and

Jason Hennigar wrote: > Hi Jean-Mark and Marco, > > I encountered the same problem using SPeex on a blackfin where any tone > would pass correctly for between 1 and 2 seconds and then switch to > noise afterwards. Disabling the VAD solves this issue. > This is not a problem, its a feature. A tone is not voice. VAD should suppress it. Regards, Steve

Hi all, I have a problem when I am encoding (or decoding) stereo audio. With mono data, things are fine and everything works without any problems. When I try to decode stereo data, all I get is a static sound - similar to that of a radio not tuned to any specific station. I wonder what might be wrong? Below is the code, first, of the encoder and next that of the decoder. Any information or

hy, here is my speex encoder/decoder .. the sampleRate i use is 16000 and quality,complexity are at 5. can someone take a look in to the code and see if there is something that is making that robot voice here is a link to colored and numbered code, same as below http://barvanjekode.gama.us/temp/1257361243.html thanx. code ----------------------- #include "codec.h"

I was unable to build the whole Mumble system on CentOS but it's available for Fedora Development. I just wanted the server part on my headless server, and a static build is available from the Mumble project on Sourceforge. So I grabbed the Mumble SRPM from Fedora Development, the static build from Sourceforge, and stripped the spec file down to the minimum needed to just install the

Hi i'm developing a sort of VoIP application for my ipaq using speex... I'm still at beginning and i have many problems encoding and decoding my wav files....output is only noise! Why? I'm using Libspeex 1.1.3, Embedded VisualC++ 3.0, Ipaq 3850(206 MHz Intel® Strong ARM 32-bit RISC Processor) PocketPC 2002 (Windows CE 3.0). Libspeex is complied with the definition of

Hi, When compiling mumble-iphone from https://github.com/mumble-voip/mumble-iphoneos <https://github.com/mumble-voip/mumble-iphoneos> I had a parser error on the file CodeOutputStream.m (form https://github.com/booyah/protobuf-objc/tree/696b7b61cdd4e8d77c55ace98b3119194fa04b7f <https://github.com/booyah/protobuf-objc/tree/696b7b61cdd4e8d77c55ace98b3119194fa04b7f>). I know that the

On Fri, 19 Aug 2016 23:40:45 -0700 ToddAndMargo via samba <samba at lists.samba.org> wrote: > On 08/16/2016 12:52 AM, ToddAndMargo via samba wrote: > > Hi All, > > > > Fedora Core 24, x64 > > samba-4.4.5-1.fc24.x86_64 > > > > smbclient -L 127.0.0.1 > > > > is very, very slow. It comes back correctly, but takes 20 seconds. > > One

somefile.pp class mumble { } class mumble::testcontents inherits mumble { file { "/tmp/testfile": path => "/tmp/testfile, ensure => present, mode => 0640, content => "I am a test file.", puppet parser validate passed it. puppet apply says it is run yet no /tmp/testfile appears the puppet master is running and this is being

hy, recording and playback is working perfectly without speex. i have try to set samplerat from 6000 to 441000 and quality from 1 to 10 sam with complexy, but the best i can get is with 16000 samplerate, 5quality and 3complexy .. but still, the voice that came out is annoying, artificial, robot ,... Lp, Tim +--------------------------+ | email: rico at gama.us | | www: http://gama.us

On Sat, 20 Aug 2016 04:21:07 -0700 ToddAndMargo via samba <samba at lists.samba.org> wrote: > On 08/20/2016 01:35 AM, Rowland Penny via samba wrote: > > On Fri, 19 Aug 2016 23:40:45 -0700 > > ToddAndMargo via samba <samba at lists.samba.org> wrote: > > > >> On 08/16/2016 12:52 AM, ToddAndMargo via samba wrote: > >>> Hi All, > >>>

I have a Sipura SPA-841. It's developed a nasty habit. At random times, it likes to dial my cell phone voicemail number and play my messages to anybody who happens to be within earshot. Any clues where to look at what's going on? My voice mail number (extension 220 in my dialplan) is the only number being dialed. When this happens, show channels looks like this: IAX2/NuFone-1

Hello there! our company (e-learning) is trying to roll out Mumble for our users. The quality is awesome but setting up the program is a pain for our users and we'd like to improve that for our users and for Mumble users in general. The main issue our users have is with voice detection. Speaking with Mumble's community they informed me Now, one of the most twitchy aspects of the audio