similar to: Problem with encoding the first frame of a sample

Hi Jim, First of all - thanks, turning the highpass filter off was what I needed, and the waveforms match now. But, when i did the PESQ tests again I found an interesting result : version 1.0.5 still got a slightly better average score, but the standard deviation on version 1.2 beta1 was much smaller. The cause for that is this - on some samples versions 1.0.5 and 1.2beta2 produced a single

Hi Aviv, Does the audio sound bad? You can try turning off the highpass filter (which was not in 1.0.5). This code is from ti/testenc-TI-C5x.c in the source tree: /* Turn this off if you want to measure SNR (on by default) */ tmp=0; speex_encoder_ctl(st, SPEEX_SET_HIGHPASS, &tmp); speex_decoder_ctl(dec, SPEEX_SET_HIGHPASS, &tmp); - Jim ----- Original Message ----- From:

Hi, I have been using speex version 1.0.5 on a text-to-speech program. Recently I upgraded to version 1.2beta1 and noticed that the waveform the I got after encoding and decoding on the new versions (beta1,beta2) is much more different than the original than on version 1.0.5. I also ran a PESQ comparison test on 700 voice samples and got better results in the older version (I used quality 9, and

Hi, OK, basically it appears to be an overflow of the decoded signal, but I can't reproduce it with speexenc/speexdec. There's an overflow occurring instead of what should be saturation. Is it possible you're using speex_decode() and converting from float to short without first checking for overflows? Normally speex_decode_int() should do it for you, but if you use the float version

Hi, I am using 1.2beta2 on a C5416 doing narrowband in the decode function I am having a problem with the execution of my program vectoring off to random interrupts that are not used. I have tracked down the error to the highpass function called in nb_decode -very close to the end of the function-context: it is called here: ln 1719 for me if (st->highpass_enabled) highpass(out,

Just wanted to let anyone know that might have checked out the generator before and couldn''t use it b/c you''re project required graceful degredation. Well its in there now. Thanks everyone and enjoy. Demo: http://ajaxscaffold.height1percent.com Release Notes: http://www.height1percent.com/articles/2006/03/04/ajaxscaffold-2-2-0-released-with-graceful-js-degredation -- Richard

After I'm adding to the my path llvm-gcc4-1.8-x86-linux/llvm-bin/ that contains llvm-gcc.exe and llvm-g++.exe I still get the same error message: configure: WARNING: ***** llvm-gcc/llvm-g++ was not found, or does not appear to be configure: WARNING: ***** working. Please make sure you have llvmgcc and llvmg++ in configure: WARNING: ***** your path before configuring LLVM. The runtime

Hello, Is there any way I can use the gregexpr functions (or a different function) in a manner that will also return overlapping (i.e. non disjoint) regular expressions? For instance, when running gregexpr("AAA","AAAAAA"), I get two matches, one at position 1 and one at position 4. I'd like to receive 4 matches at positions 1, 2, 3 and 4. Thanks, Schraga

It might be SELinux. On a standard system; when we run things as a user from the command line SELinux rules do not apply. It would explain why it works manually but not via systemd. Rather than using an init.d script you might want to try using a systemd service. I haven't tested but something like this should work. [Unit] Description=timidity daemon [Service] PIDFile=/var/run/timidity.pid

Hello, I'm trying to install oneChannelGui on my computer. For this purpose, I've tried to carefully follow the manual, and done the following: 1. I've installed the Affy power tools 2. I've installed TCL from http://www.activestate.com/Products/ActiveTcl/ (by following the link at the right side of the page, and installing activeTCL8.5.0.0) Nonetheless, when I try running

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I've been trying to get the timidity system running as a daemon. I wrote the following init script: #!/bin/sh # # timidity # ### BEGIN INIT INFO # Provides: timidity # Required-Start: # Required-Stop: # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: Add and remove timidity # Description: ### END INIT INFO .

Hi all, This is more a question in statistics, but I hope to get also the R practice for my question: I have an ancova model where the response variable is flowering (plant has a flower = 1, no flower = 0). The explanatory variables are leaf length, leaf thick (both continuous variables), and soil type (factorial with three levels): >

Hi Anton, But if I'm ignoring this warning and continue according to the instructions (i.e. copy back the saved tblgen and perform build as usual), then I get a LOT of linkage errors regarding undefined symbols. For instance, smWriterEmitter.cpp:(.text+0x21): undefined reference to `_ZNSs6assignERKSs' AsmWriterEmitter.cpp:(.text+0x39): undefined reference to `_ZNSs6assignERKSs'

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 SELinux certainly was causing fun and games. I copied your suggestion to /etc/systemd/user/timidity.service (mode 750) but it's still not happy: [root at tamar user]# systemctl status timidity timidity.service Loaded: not-found (Reason: No such file or directory) Active: failed (Result: exit-code) since Th... ... Starting LSB: Add

Hello, I've assembled a Multivariate ctv (with a lot of help from Achim Zeleis, who has now posted the view on CRAN). I'd be grateful for comments regarding missing packages / functions. Opinions on the organisation of the view would also be appreciated, as well as having any errors pointed out. I've adopted a rather broad and vague definition of "multivariate", which may

I've been running Samba v 2.07 for over a year on a small sub network with excellent results. Win NT 4.0, Win 98, and Win 95 machines all connected properly, and transfer speeds and reaction time is quite good. One of the Win NT machines was just upgraded to run Windows 2000. The connectivity still works, but I noticed a severe degredation in transfer speeds to and from the Windows 2000

Hi there, I'm currently experiencing a minor problem using the bridge module under kernel 2.4.27 part of the Devil Linux distribution (http://www.devil-linux.org). The problem I am having is that when the bridge is unloaded during a reboot I receive the following errors in /var/log/messages: Nov 14 13:22:13 src@Devil kernel: unregister_netdevice: waiting for br0 to become free. Usage count =

A bit of a perennial I'm afraid. My wife has filled up her iPhone 6 with photos, and wants them moved onto my computer. I'm running CentOS 7 patched about 30 minutes ago. Needless to say the computer can't see the data on the iPhone, though it does recognise the phone as an iPhone. Any suggestions (well any that don't involve a steam roller, sledge hammer or GBH to the whole of

I've come full circle on the Ogg text stream format, back to arbitrary associated xml streams. What's changed? Mostly rolling the requirements around in my head, and weighting them differently. I think we've dealt with the complexity issue; this functionality can be optional for "dumb" audio players, and possibly also for dumb video players, though there it's a smaller

Hello, I'm trying to cross compile version 1.8 of llvm using mingw32. I followed the instructions that are published in the site (at http://llvm.org/docs/GettingStarted.html). However, I no matter what I try I get the following error message: configure: WARNING: ***** llvm-gcc/llvm-g++ was not found, or does not appear to be configure: WARNING: ***** working. Please make sure you have