similar to: Echo canceller end up more echo than before.

It seems like the firefox 2.0 not quite works with hotmail... I am reposting my message again with IE for easy readability. Sorry about mess. Hi Jean-Marc, Thanks for the suggesting. I tried the test wtih my recording file offline through the testecho. I got the same result(no prepocessor echo suppression) as my recording file for that live call. Basically I don't see the difference

Hello everybody. I have the same problem like you. I use ARM microcontroller too. Here is the list of all functions called by speex_echo_cancel until goes into infinite loop: speex_echo_cancel() | spx_fft | kiss_fftr | kiss_fft | kiss_fft_stride | kf_work Function kf_work looks like: static void kf_work(kiss_fft_cpx * Fout, const kiss_fft_cpx * f, const size_t fstride, int

Hi all, does anybody has ran echocancellation successfully on windows ? I have a problem playing audio there. If you play a wav file no mater how I play it after comparing the captured data with the original file there is always difference in the audio length (for 18 sec of audio there is more than 250 ms of difference). Which of course breaks echocancellation. I've tried playing the audio

Hi Folks, I am having trouble using speex_echo_cancel. As a starting point, I am using the testecho.c source code. I compiled the 1.2beta1 version. I have not tried any other versions of speex. The document says that the order of arguments to Speex_echo_cancel is (echo_state, input_frame, echo_frame, output_frame, residue) where "input_frame" is as captured from mic and

I have * box on machine with external ip address and internal one I'm tring to register to it from to machines - one from innternet ( everything is ok - in sip.conf nat=yes)\ and the other one is in the internal network (in sip.conf - nat=no ) and it say 403 Forbidden? Any Ideas ? here are the logs and configs From the external SIP Client whic registers.

speex-dev How can I user echo canceller with real time net stream,when I test it with file,it's very good,but when I use it in my voice chat,it is not work,is there some working demo like GIPS? best regards Yong Chen szcj23@tom.com

Hi,When captured speech contain sudden burst of sound like a bell ringing or a loud click sound along with echo,  echo canceller seems go wrong in latest svn version. Is it because of sudden  change from normal speech to say some high frequency sound?ThanksJam -------------- next part -------------- An HTML attachment was scrubbed... URL:

I am using 'portaudio' and 'speex' to implement a speech audio capture/playback. Preprocess works fine but not the echo canceller (associated with preprocessor). I have read 'testecho.c' but it didn't help me. What I am doing bad? This is my implementation: One thread to capture and playback, both are different functions called in different times directly from

Hello. I'm from Federal University of Rio Grande do Sul - Brazil and I'm trying to adapt speex_echo.h (speex-1.2beta3-win32) to our video-conference software code. We are working on amplitude values, but I realised that in order to AEC works, one has to convert amplitude to frequency and filter the echo frequencies. So, my question is: Do I have to manually convert amplitude samples to

> > Hello everybody. > > I have the same problem like you. I use ARM microcontroller too. > > Here is the list of all functions called by speex_echo_cancel until goes > > into infinite loop: >... > > else > > { > > do > > { > > kf_work(Fout , f, fstride*p, in_stride, factors,st); // ><---------- > > here this

Hi All, I am working on my master project to port the Speex Acousic Canceller to FPGA. But I am not able to get a satisfied result in its performance whenI integrated it to a SIP softphone as my first step. The SIP softphone calls to a PSTN gateway and lands to my land line phone. I can hear the echo of my every word while I talks on the land line phone. I am using G.711 codec, frame_size 80

Jean-Marc, I have traced the second infinite loop further. When st->adapted becomes true (mdf.c line 623), the first Yf[i] value is 4, the leak_estimate is 0xd4e, the resulting r is 3. The first value in st->Rf is 0, so e is 1, and r is set to e>>1, or 0. A little later there is a divide by r, and there is the hang. It seems that the 0 in Rf[0] is the problem, but I am not

Terrific! The patch fixes my problem quite decisively. I will want to use this with a 16K sample rate. Is it expected to work well with just another slight patch, or will we need to modify it more deeply? Also, are there any tunable parameters besides tail length? I am wondering about the aggressiveness of adaptation and I know you are an expert in that area. Thanks so much, Michael

Just tried your files and I'm not running into any infinite loops and the cancellation works fine. Unless the C6x has the same problem, I suspect a 16-bit problem. I'll check and see if I find something. About the r=0 problem, I can't find where it ends up in a denominator, so I suspect is not (directly) the problem. Jean-Marc Le lundi 08 mai 2006 ? 20:05 -0400, Jim Crichton a ?crit

Hi All ! i?m running Clearcase (IBM Rational) and have some strange problems ... when i use Samba ver 3.21b i can?t access the samba share by name (\\servername\sambashare) but i can access it on ip (\\192.168.1.100\sambashare\) i?m running debug level 10 and it seems like it can?t authenticate when access on netbios/dns/host name but on ip it can ? when running samba ver 3.23b from

Hi Jim, I've just been made aware of these problems (look for the thread "speex echo cancellation limitations"). It's on my short-term TODO list. > If fftwrap.c, I ifdefed out the spx_fft_float and spx_ifft_float routines, > because there were not used and required smallft.c (which is not so small at > all) to be added to the build. Right, need to cleanup that

I would like to add AEC to my program. Since the nature of my program is such that its playback and recording are asynchronous. I have no idea whether the testecho.c example will work for me. Anyone here has experience with the AEC in async mode? YUN TAO

Thanks for your help, Wei-Ren and Anton. However since I am doing some experiments with klee( http://klee.llvm.org/GetStarted.html) and llvm-gcc seems to have better compatibility with it. So I still hope that I can use llvm-gcc:-) Hongxu Chen On Sat, Mar 16, 2013 at 3:35 PM, 陳韋任 (Wei-Ren Chen) [via LLVM] < ml-node+s1065342n56013h94 at n5.nabble.com> wrote: > Hi Chen, > >

> I built and ran the same test on the TI C64 simulator, and the echo was > canceled nicely (about 10:1 reduction in the peak amplitude during the > second of two brief speech bursts). So, my problem must again be related to > the 16-bit processing on the C5X DSPs. Good. At least we've narrowed it down a bit. > Also, the line where it is hanging is: >

Hi, I wanted to play around with the echo canceller so I tried the testecho program. As speaker sound I fed it with a 440 Hz sine wave, and as mic with a 550 Hz + 440 Hz sine waves sound (but the 440 Hz component half the amplitude). I kind of expected to get a somewhat clean 550 Hz sine out, but it doesn't seem to work that way. Are there better samples I can use with testecho to see