similar to: Windows Mobile 5.0 SDK - SPEEX

Che face? :) I suspect you should build your own .lib file - not use the pre-existing one. ________________________________ From: speex-dev-bounces@xiph.org [mailto:speex-dev-bounces@xiph.org] On Behalf Of Alex Lupoian Sent: Tuesday, March 14, 2006 10:34 AM To: speex-dev@xiph.org Subject: [Speex-dev] Windows Mobile 5.0 SDK - SPEEX Hello I've looked into SPEEX SDK and source codes

I have sent the visual studio project files that compile the speex client to jean-marc directly (as an attachment), sometime this week, I will also upload the binary builds of static library files to my site www.phonestack.com. I am porting our LTP (lightweight telephony protocol) to some embedded systems. I require to run speex in an environment that doesn't support memory allocations. How

hi, i am trying to compile a fixed point version of lipspeex on desktop windows environment. a short reason for the complicated story is that we need to keep the 'engine' part of our project same across the various ports of our voip project (blame the pointy haired boss). now, when i compile with FIXED_POINT defined in the Visual C++ 6.0, i get these errors:

Hi, I am new to speex and I am trying to use the sample program given in the speex document. I have made some modification to that sample, so that input can be read from a file and the output can be re-directed to the file. I tried to encode an audio file using the sampleenc and decode the same by sampledec.c I am able to do it successfully, but when i try to play the output file from the

I can't get the versions of sampleenc and sampledec in the manual to work back-to-back. I've tried using speex 1.0.4 and 1.1.6. What am I doing wrong? [gerv@otter]$ file in.wav in.wav: RIFF (little-endian) data, WAVE audio, Microsoft PCM, 16 bit, mono 8000 Hz Strip headers: [gerv@otter]$ sox in.wav in.raw Command as given on manual page: [gerv@otter]$ ./sampleenc in.raw | ./sampledec

<style> p {margin-top:0px;margin-bottom:0px;} </style> <table border=0 width=100% bgcolor='' cellpadding=0 cellspacing=0 align=center> &nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp<tr> &nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp<td valign=top style='padding:8pt;'><font size=2>Hi! I excuted

<style> p {margin-top:0px;margin-bottom:0px;} </style> <table border=0 width=100% bgcolor='' cellpadding=0 cellspacing=0 align=center> &nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp<tr> &nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp<td valign=top style='padding:8pt;'><font

I suspect I am missing something basic but I do not seem to be able to get the sampleenc and sampledec programs to work together. I suspect the decode operation is failing, but I cannot find out why. Backgound information: 1) 1.0.4 tar package 'make' worked and installed on a mandrake 10.0 linux 2) speexenc and speexdec appear to work fine. 3) testenc and testenc_wb work fine, though

I suspect I am missing something basic but I do not seem to be able to get the sampleenc and sampledec programs to work together. I think I do not have a compile swtich of flag set correctly. Backgound information: 1) 1.0.4 tar package 'make' worked and installed on a mandrake 10.0 linux 2) speexenc and speexdec appear to work fine. 3) testenc and testenc_wb work fine, though I

hey guys, I just compiled an application similar to sampledec.c (for speex 1.1.10) and it was fine but when I executed it, the app exited without doing anything. I'm using MS VC 6.0 and this was all I got - First-chance exception in sampledec.exe : 0xC0000005: Access Violation. Has anyone encountered this / does anyone know how to deal with it? by the way, sampleenc executed perfectly... When

Hi Steve, thanks for the advice. I placed the appropriate functions outside the while statement but I still get this error at the while loop: First-chance exception at 0x004010fa in SPXDEC.exe: 0xC0000005: Access violation reading location 0x0000000c. Unhandled exception at 0x004010fa in SPXDEC.exe: 0xC0000005: Access violation reading location 0x0000000c. It looks like the same error. I've

Dear sir, I've a problem that the .wav file couldn't play after calling "sampleenc male.wav|sampledec male_speex_15.wav".I found that the new file male_speex_15.wav is smaller than the original file in size.I implemented the test on Linux system.The original file male.wav is 96044 bytes,while the new file male_speex_15.wav is 96000 bytes.I'm eager to know the reason.Thankyou!

> For encoding into and decoding from "raw Speex stream" (if you can call > it that), I suggest you start with the sampleenc.c and sampledec.c > example code in Appendix B of the Speex Manual. There is no such a thing as a "raw Speex format". Also, sampleenc.c and sampledec.c are good for learning how to use the API, but the compressed format shouldn't be used in

Mon, Here is feedback that I got concerning the access violation, i.e. the failure of the while loop below. Does this solve the problem? Steve My guess is that speex_decoder_init() should be outside the while().. loop as speex_decoder_destroy() is also outside. ----- Original Message ----- From: Mo Win To: speex-dev@xiph.org Sent: Monday, October 17, 2005 8:05 AM Subject:

Hi All, In sampleenc.c and sampledec.c, if I change the FRAME_SIZE to any other value, I get very garbled speech. Can anyone tell me if I need to set something else if I would like to change the frame size ? Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.xiph.org/pipermail/speex-dev/attachments/20070502/35ea524b/attachment.htm

Hi, everyone! I'm a newbie of speex develog. I tried to encode and decode with the sample program in the speex manual. I compile those program with gcc sampleenc.c -o enc -lspeex gcc sampledec.c -o dec -lspeex I run these two program in this way and then speak loudly: ./enc /dev/dsp ? ./dec /dev/dsp I thought I would hear my voice. However, what i heard was a lot of noise. I

ok, interesting ! Do you know how much CPU it takes for a real time encoding/decoding ? it's more around 20% or 80% instead ? Do you know if it works for 44100 Hz / 32kbps / Quality =8 ? thanks again. Vincent ----- Original Message ----- From: "Ashhar Farhan" <farhan at phonestack.com> To: "Vincent Burel" <vincent.burel at vb-audio.com> Cc: <speex-dev at

I can confirm that it will run in real time on iPhone if you compile with FIXED_POINT defined; it will also run in real time if you have FLOATING_POINT defined and disable 'Compile for Thumb' in the target's build settings in xcode. Wideband works too. Cheers, Dave

You should really do a check to make sure nbBytes isn't larger than 200, otherwise you're going to read past the end of your char array. fread (&nbBytes, sizeof(int), 1, fo); _____ From: speex-dev-bounces@xiph.org [mailto:speex-dev-bounces@xiph.org] On Behalf Of Mo Win Sent: Monday, October 17, 2005 7:31 PM To: speex-dev@xiph.org Subject: Re: [Speex-dev] Error

Platform Intel Linux/Fedora Core 2 ALSA Soundblaster 128 PCI I am capturing U8 (unsigned 8 bit mono) audio from the sound blaster and attempting to compress it with speex. I have built and installed speex on the computer and can compile and link with no problems. I have the sample programs (sampleenc.c and sampledec.c) which I am following. The only difference is my raw data is in a char array