similar to: Plans for 2.4.0

Dear List! I use a shorewall 2.0.8 on a Debian sarge system. I use a DSL connection to the Internet (ppp0 - eth1 to the modem) and a bridge to the local lan. The bridged config i''ve made with bridge.html from the shorewall site. The Bridge is between local net and a openvpn tap device. This works. I ccan make tunnels, and a can make a lot of things through the firewall. I can get a list

Hi, Trying to figure out why I cannot get access to dell.com Their site is up because I can browse using a different firewall. Trying to find out where the logs are located and what log files it would write to if it were to deny browsing to a website. I can see the [UNREPLIED] when using the shorewall status. Was hoping to know what logfile it is writing it to. Thanks in advance, Elmer

I apologize for the first message. :) --------------------------------------- I have an FTP server running in the DMZ section of my home network. It uses port 23000 for connection and ports 19990 to 19994 for data transfer. I have setup the following rule for outside people to connect to it: DNAT net dmz:192.168.2.2 tcp 23000 I''m at work right now and I can''t use

I have searched your FAQ''s and read the documentation on your site as well as googling. I am not able to figure this out. If you have any ideas can you please help. I am using the linux-ha failover with redundant firewalls. As part of the function of the linux-ha software consists a service called heartbeat which is a connection from each failover node through a serial cable or ethernet.

I''m attempting to setup Squid as shown on: http://shorewall.sourceforge.net/Shorewall_Squid_Usage.html#DMZ The firewall is a Bering 1.0 firewall running Shorewall 1.3.11, Red Hat 7.2 on the server in the DMZ. I''m not seeing the requests come in to the server using tcpdump. The server is 192.168.2.1 connecting to eth2 on the firewall, the local traffic I''m trying to

I''m having a problem with the Shorewall firewall and CUPS printing interfering with each other. My Linux firewall machine is acting as both a CUPS server and client for all of my tests. Shorewall 2.0.13 CUPS 1.1.22-2 Linux kernel 2.6.9 CUPS was working fine to print to my Epson C84 (network connected via a Netgear PS101 print server using lpd://PS101.IP.address/raw ) until I

I have problem getting answer on http request from all my local subnets but not from local subnet. Ping and requests on ports 21 22 23 25 110 works fine. I logged port 80 in rules files and I got accept entry same for local subnet and other subnets. Local subnet is 192.168.6 Dec 29 09:52:40 zinfsrv2 kernel: Shorewall:loc2fw:ACCEPT:IN=eth0 OUT= MAC=00:09:6b:07:ca:cc:00:10:b5:fa:bd:71:08:00

Hello! I am using shorewall shorewall-2.0.11-1 on fedora core2 (iptables-1.2.9-95.7). My box has 2 physical nic´s plus one virt. ipsec interface for a freeswan-vpn connection. A few days ago, portsentry spit out a lot of connections from windows clients (port 135, 445). Ooops. I review my shorewall settings but could not find a mistake. So I took a win-client and established a second

Hi, I get frequent logfile entries from Shorewall similar to the following: Nov 25 11:22:51 10.0.0.248 kernel: Shorewall:net2mill:DROP:IN=eth2 OUT=eth0 SRC=202.96.117.50 DST=10.0.0.10 LEN=56 TOS=0x00 PREC=0x00 TTL=241 ID=0 PROTO=ICMP TYPE=11 CODE=0 [SRC=10.0.0.10 DST=202.101.167.133 LEN=48 TOS=0x00 PREC=0x00 TTL=1 ID=13591 DF PROTO=TCP INCOMPLETE [8 bytes] ] Could someone explain what the

Hi, I have a proxy/firewall, I want to dnat requests for 193.205.140.106 on port 443 towards 10.2.15.23 and requests for 193.205.140.106 on ports 4330 and 3389 towards 10.2.15.25, these rules must apply from internet, loc and fw (some client use a proxy on fw to reach these servers) I have tried with the following rules: DNAT net dmz:10.2.15.23 tcp 443 -

Dear All, I''m using the kernel 2.6.6, iproute2-2.4.7.20020116, iptables v1.2.9, and gentoo. I have a leased-line 64 kbps. I can see the counter works in iptables, but in the htb, it doesn''t go to the right class (it always go to the default class). Any help will be appreciated here''s my htb conf #!/bin/bash tc qdisc del dev eth1 root tc qdisc add dev eth1 root

Good day to all. I don''t like to Post unless I am really stuck. Guess what? Redhat with Shorewall. Been using this for years. I have a new client that we have setup with Redhat and Shorewall. The problem is that his outside address (ETH0 = NET) is dynamic (i.e. DHCP enabled). All the rules work fine when we use a STATIC address on Eth0, so we know the rules, filters, tos etc work fine

Hi, I have a install of shorewall I have 2 interfaces(I think) ppp0[connection device] and eth0 [LAN device], I want to allow all traffic from the the internet in or aleast port 80 and CVS and webmin and mail and everything normal to the main machine with shorewall on it. I changed to policy file but it just gave me errors as to double interfaces. I also what still to alow connection sharing

I''m very new to shorewall. My setup is IP Gateway (CentOS 4 + Shorewall) with 3 NIC cards. Shorewall works great on the firewall machine. Bind also works (local net machines get IPs fine). Under firestarter, all works great. With shorewall, the loc machines can not route past the firewall. They can connect to the firewall, but not past it. Exactly what information should I post to get

Hi, I''m running Slackware 13.37 x86 using Shorewall 4.4.21 with OpenVPN and the VPN options I''m using in Slackware 13.37 will not work in Shorewall, but in Slackware 13.1 using the same Shorewall version and files, the ''interfaces'', ''policy'' and ''zone'', are all I have configured, it was working and this also works in Arch at

Hi, I've been able to get tinc setup when I flush all my iptables, but after enabling iptables and a delay I get a "Destination Net Unknown". I have three host (HOME10.0.3.2, MASTER 10.0.3.1, WEB 10.0.3.3) MASTER and WEB are in Digital ocean in the same data centre. HOME <---> MASTER <---> WEB I've tried multiple forwarding/masquerading/etc rules and

Hello Julien, Am Tue, 15 Jan 2019 09:30:23 +0100 schrieb Julien dupont <marcelvierzon at gmail.com>: > In that case I see: > IP 172.16.0.3 > 192.168.1.1: ICMP echo request, id2135, seq1, length 64 > IP 172.16.0.3 > 192.168.1.1: ICMP echo request, id2135, seq2, length 64 > IP 172.16.0.3 > 192.168.1.1: ICMP echo request, id2135, seq3, length 64 > > Packet goes

Hi everybody I have a Problem with Masquerading from my local net (loc) to my VPN (loc2). I can reach every Service from loc2 in loc, but I can''t get reach any service from loc in loc2. Has somebody an Idea where my mistake is ? Without shorewall, it was working. Thanks for helping Lars Technical Information : Shorewall 2.0.13 Suse 9.0 *177.177.77.X The first 3 Counts are changed

Hi, I have a big "name problem" with my internal mail server (10.0.0.152). It is "seen" on the internet through DNAT (213.58.230.27). Also there is a MX record pointing to the machine. Everything works fine from the outside. However i can''t set the mail clients on the lan pointing to the mx record, because this one points to 213.58.230.27 and the firewall

Hi My situation: I have two pc''s with public ip''s (192.159.56.206(webserver) and 84.196.123.65(mail-gateway)) in the dmz. The firewall (84.196.123.66) is configures with proxyarp, so nothing is changed on the pc''s from when they were not behind the firewall (i.e. they don''t have the firewall as gateway (and they each have different gateways, only 84.196.123.65