similar to: Rsync slow with hard links

Greetings - The short story is that got my new install completed with the partitioning I wanted and using software raid, but after a reboot I ended up with a grub prompt, and do not appear to have a grub.cfg file. So here is a little history of how I got here, because I know in order for anyone to help me they would subsequently ask for this information. So this post is a little long, but

On 10/12/14 18:13, Jeff Boyce wrote: > Greetings - > > The short story is that got my new install completed with the > partitioning I wanted and using software raid, but after a reboot I > ended up with a grub prompt, and do not appear to have a grub.cfg file. > So here is a little history of how I got here, because I know in order > for anyone to help me they would

On 08/05/2015 10:23 AM, Chris Murphy wrote: > Nothing about hd0 or hd1 gets baked into the bootloader code. It's an > absolute reference to a physical drive at the moment in time the > command is made. Is that true? If I have a system with two disks, where device.map labels one as hd0 and the other as hd1, and I swap those numbers, the resulting boot sector will differ by one bit.

On Thu, Aug 6, 2015 at 3:19 PM, Chris Murphy <lists at colorremedies.com> wrote: > On Thu, Aug 6, 2015 at 2:59 PM, Gordon Messmer <gordon.messmer at gmail.com> wrote: >> On 08/05/2015 10:23 AM, Chris Murphy wrote: >>> >>> Nothing about hd0 or hd1 gets baked into the bootloader code. It's an >>> absolute reference to a physical drive at the moment

hi, we've got a server with a 8 port 3ware card and 2 ide system disks. now we'd like to replace the ide disks with scsi disks or sata disks (these also recognized as scsi in the kernel). but we can't boot from it. the problem are twofold. first in the normal case the first scsi host scsi0 id the 3ware card, but grub only see the first 8 disk so if the system disk are sdi and sdj the

When I use my kickstart file (which works on 5.1 x86_64) with 5.2 I get the following error. I put my kickstart file at the end. Do I have something incomaptible in the file? jerry -------------------------------------- Traceback (most recent call first): File "/usr/lib/anaconda/network.py", line 341, in lookupHostname ret = isys.pumpNetDevice(dev.get('device'),

Hello, I have installed the Xen 4.1.1 and a working kernel 2.6.32.43 which supports Xen on a Ubuntu Linux 10.04 LTS. However, I have never successfully booted the Hypervisor and Dom0. The screen is always black after some kernel messages rapidly go by. I think that I may pass the wrong parameters to the kernel or Hypervisor with GRUB2. Can any one share his/her working grub.cfg for GRUB2 with

I am trying to backup my /home directory. A friend helped me with this script: #!/bin/sh #backup friday #"Spinning up backup drive and mounting it .." cd / mount /mnt/hd2 #"Starting backup procedures" rsync -avx --exclude="/home/gary/.thumbnails/" --exclude="/home/gary/tmp/" --delete --ignore-errors /home/gary /mnt/hd2/2010 umount /mnt/hd2 #END It backs

Hi messmer, seems that anaconda supports partitioned RAID devices. Disk selection see one mdraid device and permits to create partition on it. Il 13/03/2016 01:04, Gordon Messmer ha scritto: > On 03/12/2016 08:22 AM, Alessandro Baggi wrote: >> From several how-to concerning raid1 installation, I must put each >> partition on a different md devices. > > Not necessarily. You

Dear all Recently, i did some work to test small files performance for gnfsv3 transport. Following is my scenario. #####environment##### ==2 cluster nodes(nodeA/nodeB)== each is equipped with E5-2650*2, 128G memory and 10GB*2 netcard nodeA: 10.254.3.77 10.128.3.77 nodeB: 10.254.3.78 10.128.3.78 ==2 stress nodes(clientA/clientB)== each is equipped with E5-2650*2, 128G memory and 10GB*2

Dears, i setting a samba with shared server in me enviroment but i do not knew enable trash for this. What setting i need for enable trash in me samba? I search links in google for enable trash in samba4 but i do not give help. Below my smb.conf: [global] # Substituir xxxxxx pelo nome do domínio desejado caso necessário workgroup = oduvaldocozzi # Substituir xxxxxx pelo nome do servidor

Hi all, I use XP on my laptop PC, with 30 GB HD (single partition), and a 3.5" hard drive (not a stick), accessed through a USB encasing, partitioned as five logical drives. I have successfully set up syslinux to boot several Ubuntu versions from the primary USB hard drive partition, and no problems there. The problem is, I would like to have an entry in the menu, like "Boot from

2013/8/7 Jonas Keidel <jonas at jonas-keidel.de> > > > 2013/8/6 H. Peter Anvin <hpa at zytor.com> > >> On 08/05/2013 11:29 PM, Jonas Keidel wrote: >> > 2013/8/6 H. Peter Anvin <hpa at zytor.com> >> > >> >> What about "chain.c32 hd1" or "chain.c32 hd1 swap"? >> >> >> > >> >

On 08/05/2013 11:29 PM, Jonas Keidel wrote: > 2013/8/6 H. Peter Anvin <hpa at zytor.com> > >> What about "chain.c32 hd1" or "chain.c32 hd1 swap"? >> > > That's right, but due to our pxe environment we need a static entry which > handles both, booting from first and second hdd if one fails. localboot > does so. > Actually this does

Earlier this evening, I had the interesting experience of shutting down my machine (because of that lp out-of-sync problem, discussed elsewhere), and watching it not come back up. I admit that I changed out one of my DVD writers for another one, but I don't understand how that could have had any effect on this: When I restarted the machine, it came up to the point where it normally shows:

Code doesn't just write itself... Jonas Keidel <jonas at jonas-keidel.de> wrote: >I like to reactivate this topic because i don't see any changes at the >last >time... >So what about the topic? > > >2013/8/9 Jonas Keidel <jonas at jonas-keidel.de> > >> 2013/8/7 Jonas Keidel <jonas at jonas-keidel.de> >> >>> >>>

Dear All: I am having trouble trying to dual-boot VMware and Linux, and I tried everything I could come up with. The situation is that /dev/sda is fully used by VMware and /dev/sdb is used by Linux. VMware uses Syslinux, so I thought this would be simple... However, it is not. The bootable FAT partition is too smal to have kernels in it. As a fallback I tried to chain-load GRUB, but that did not

Hello every one. This is a question done by me, not yet answered. Please, help. I: 1. Run install-pdf from linux to support faxes on my asterisk. 2. Made the configurations throuhg AMP in a. Setup->Inbound Routing->(the only route I have)->fax extension->System b. Setup->Inbound Routing->(the only route I have)->fax email->(my email) c.

Hi All, Just wondering if anyone else has experienced a reboot problem. I have a intel motherboard based server of late 2004 vintage with 2 by 160GB SATA drives running linux software raid 1 with boot partition and /. The server was running 2.6.18-128.1.10 and had uptime of approx 40 days. I did a yum update and reboot yesterday and after the POST the screen showed GRUB From memory this

Is there a way to tell WINE that question marks in directory names are okay? WINE fails whenever I ask it to access a file from within a directory with a question mark in its name. Specifically, my HTPC marks all commercials using WINE and Comskip. Whenever the schedule includes a tv show with a question mark in its title, WINE fails. Here are the logs that illustrate the failure. Script log