similar to: illegal opcode on cold pxe boots

Is there a way to produce random number for pxemenu? For example i need to balance load between 10 web-servers, so I need something like: APPEND netboot=http://boot-serv-$RANDOM10/system.img Another example is when 1000 boxes starts up at the same time (after e.g. Datacenter power failure) it'll be useful to have random values in timeout: TIMEOUT $RANDOM120 --

Hello. I am trying to run advanced dialog-like menus from com32. But I can not boot anything... ? it always fails. :-) So, my /path/to/pxelinux.cfg/default looks like this: --------------8<-------------- DEFAULT pxemenu/fancy.c32 PROMPT 0 IMPLICIT 1 TIMEOUT 600 LABEL test MENU LABEL Test KERNEL suse10_3/vmlinuz APPEND initrd=suse10_3/initrd.img ....(and so on)....

Hi, while testing syslinux-6.01_pre6 and syslinux-6.02_pre5 I noticed an illegal OpCode error on PXE exit. To reproduce: 1) Install syslinux-6.0x PXE environment 2) Use a config like I use (seems like this is getting triggered when the local boot menu entry will be executed) -> http://pastebin.com/raw.php?i=6tjqUAwX 3) Just let a client boot from network. It will hit timeout and the default

On Fri, 19 Jul, at 02:34:04PM, Igor Sverkos wrote: > Hi, > > while testing syslinux-6.01_pre6 and syslinux-6.02_pre5 I noticed an > illegal OpCode error on PXE exit. Urgh, not good. Do you see the same error with 5.11-pre8? -- Matt Fleming, Intel Open Source Technology Center

Hi, > Do you see the same error with 5.11-pre8? Yes, I do :( -- Regards, Igor

Hi, > Have you ever successfully used this config file with 4.06 or earlier? Mh, no. And I'll get the illegal opcode on 4.06 exit for local boot as well. Not sure if it has something to do with the fact, that there is no local bootloader, syslinux can start (it is a new system where's currently no OS installed). The config itself was grabbed from various PXE boot tutorials, for

Hi to all, While trying to install syslinux on small (700 MB) FAT16 Partition on HP Server got Red Screen of Death with a register dump. Illegal OpCode EAX=00001F01 EBX=000001A4 ECX=00000000 EDX=00000019F EBP=0000FBFA ESI=000007BE EDI=00000800 DS=0000 ES=0000 FS=0000 GS=0000 CS:EIP=0000:000083A6 SS:ESP=1000:0000AFF6 EFLAGS=00000206 Tested many versions of syslinux: from 3.63 to 4.06:

Hi to all, from syslinux 4.06 and 5.00 pre 12 came the same dump. Background: While trying to install syslinux on small (700 MB) FAT16 Partition on HP Server got Red Screen of Death with a register dump. Illegal OpCode EAX=00001F01 EBX=000001A4 ECX=00000000 EDX=00000019F EBP=0000FBFA ESI=000007BE EDI=00000800 DS=0000 ES=0000 FS=0000 GS=0000 CS:EIP=0000:000083A6 SS:ESP=1000:0000AFF6

Hi Well we are now using HP instead of Dell and have hit a major hurdle. We dont seem to be able to kix any of these boxes. I have been most recently trying on a dl585 and the issue appears to be that the kix kernel does not detect any nic. Its strange as the box can be installed using iso's and the nic appears as eth0: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz

Package: xen-hypervisor-4.0-amd64 Version: 4.0.1-4 Severity: important *** Please type your report below this line *** Hello Debian Team, I have some strange behavior with a DL585 G7 with only two cpu sockets used (Opteron 6238 Interlagos). I use Debian 6.0 with a XEN Kernel. Every time when I start a DomU, the server makes a hard reset without any kernel panic or output. When I start the

Hi folks, I've just spent about six hours messing around with an HP DL585 G2 server trying to get CentOS to go. This box is a dual-CPU with dual cores and 10GB of RAM total. According to the datasheet, the POST screens, and the BIOS, it has the Broadcom embedded NICs in it. The problem boils down to the installed OS (4.4 x86_64) not seeing the NICs. If you do an lspci on the system

Hi I recently installed some hba's into a bunch of these 585's as they are forming a RAC cluster - previously to this they were all using DAS without issue. After the qlogic cards were installed i reinstalled the OS and now once installed the OS will not boot - the box just reboots continuously, it does not even appear to get to grud, although this could be the ilo not displaying

Hi OK another issue trying to get X going on these boxes. It seems to be a HP issue but if anyone knows a solution that would be great. I am using the iLo interface and the hpmouse-1.1.0-73.noarch.rpm driver. As root i can startx and all is well, however when starting X as the oracle user it fails with the following error Exec fail for command "/opt/hp/hpmouse/hpmouse-helper"

2009/5/6 Andy Whitfield > Hi > Hi Andy, > I got your email address from http://www.networkupstools.org > > I've been looking at the APC Smart protocols at > http://www.networkupstools.org/protocols/apcsmart.html > And I've experimented with them via HyperTerminal. > > I'm using an APC Smart 700 UK model. > When I cold start it, it defaults to 60Hz.

Here I will introduce my idea of a inliner that can handle splitting cold edge as well: My idea is to use the inlined function, but inline from the uninlined function. 1. Do normal optimizations without inlining 2. Split the cold edges into other functions 3. Copy each function @xyz to @xyz.i (or other name that does not clash) and mark @xyz with 'inlines @xyz.i' ==> this needs an

Hi, what would be the shortest and fastest way to clone a e.g. basic Centos 5 guest for further use? For example I'd like to set up a master Mysql-server as a guest an than "clone" two additional slaves. Which xen configfiles may be edited? Can the config and the filesystem simply be copied? Thanks for suggestions! Regards G?tz -- G?tz Reinicke IT Koordinator Tel. +49 7141

try changing the interface names, (lo and eth0) to there ipadresses. if that didnt fix it, then you need to adjust the startup order. (in systemd) Greetz, Louis > Op 18 jun. 2017 om 12:12 heeft Winfried via samba <samba at lists.samba.org> het volgende geschreven: > > Forgot to give the smb.conf: > > ========== > root at debian:~# cat /etc/samba/smb.conf >

Thanks for the infos. I'm running 4.2.14. I always use apt-get to install/upgrade packages, so the init script comes standard from the official repository: =============== root at debian:~# cat /etc/init.d/samba #!/bin/sh ### BEGIN INIT INFO # Provides: samba # Required-Start: # Required-Stop: # Default-Start: # Default-Stop: # Short-Description: ensure Samba daemons are started

Hi, The actual data will be in the hot tier only till demotion. The file that you see on the cold tier is just a linkto file of the file on the hot tier. These linkto file are necessary for the internal working of the tier. On Mon, Mar 5, 2018 at 1:16 PM, Sherin George <allmyforums at outlook.in> wrote: > Hi Guys > > Got a quick question regarding hot tier and cold tier. > I

Hai, Really, you dont need to edit the systemd files. Try first with only the interface change. Then if you still need to edit the systemd files. You need these settings, but i dont thing you need it after the interface change. cat /lib/systemd/system/smbd.service [Unit] Description=Samba SMB Daemon Documentation=man:smbd(8) man:samba(7) man:smb.conf(5) After=network.target nmbd.service