similar to: Samba public IP issue

Hello, I am running two Samba Domain Controllers on as Ubuntu 18.04 VMs installed on two physical hosts. I've managed to bind them and to run the replication. My issues is that the private IP address is advertised and the replication fails. Even though I update the DNS entry? after a few minutes the changes are overwritten and the replication fails again. Can someone help me with this

Most probely he is using public ip for webservers mail etc. But uses samba with private range to setup and control user/groups and he does not want to public ip and samba ip/ports to the internet. But still, this is a error, in my personal opinion, in the resolving setup. :-/ And thats why i hammer on a correct resolving setup. But he could also add VPN this setup, and will help in fixing

Hello, I am running two Samba Domain Controllers on as VMs installed on two physical hosts. I've managed to bind them and to run the replication. My issues is that the private IP address is advertised and the replication fails. Even though I update the DNS entry? after a few minutes the changes are overwritten and the replication fails again. Can someone help me with this issue? Is there

Hai, wbinfo -Y S-1-5-21-2816186202-4468957523-2022743653-513 Does this resolve? You should see "domain users" And your missing your primary dnsdomain. (search) Go here. https://github.com/thctlo/samba4/blob/master/full-howto-Ubuntu18.04-samba-AD_DC.txt Your missing, ( see line 370 ) search: [ internal.example.com ] Add it.. Also i missed 2 other points. smb.conf add:

Check this first. https://www.itechtics.com/3-ways-showhide-security-tab-windows-10/ Greetz, Louis > -----Oorspronkelijk bericht----- > Van: samba [mailto:samba-bounces at lists.samba.org] Namens > Rowland Penny via samba > Verzonden: vrijdag 23 februari 2018 11:03 > Aan: samba at lists.samba.org > Onderwerp: Re: [Samba] R: Missing 'security' tab > > On

ah... ok, now i understand.   So you have a small difference between these to servers. My first guess would be something with vfs_objects.  Wrong orders might hide the security tab in windows.   Your setting up windows ACL's. Remove all posix related setttings from smb.conf ( im asking Rowland for support here, because om on holiday in 20 min  )  :-P :-)) ...   All you need for a windows

I would have added an extra DC.. Move FSMO Removed old server from AD, Cleanup AD. Install new server with new ip's. And Add CNAMEs where needed, Move FSMO back. Remove extra DC. ;-) Greetz, Louis > -----Oorspronkelijk bericht----- > Van: samba [mailto:samba-bounces at lists.samba.org] Namens > Rowland penny via samba > Verzonden: vrijdag 4 september 2020 10:00 >

Hai, If updated the script a bit, can you run it again? wget https://raw.githubusercontent.com/thctlo/samba4/master/samba-collect-debug-info.sh Greetz, Louis > -----Oorspronkelijk bericht----- > Van: samba [mailto:samba-bounces at lists.samba.org] Namens > Alexander Harm via samba > Verzonden: vrijdag 16 augustus 2019 9:14 > Aan: samba at lists.samba.org > Onderwerp:

strange i did not change anything in my windows 7 64bit. This is my full setup pretty basic. Ubuntu 14.04.2 LTS, Trusty Tahr, with sernet samba 4.1.17-9 I do have 1 user for samba. pdbedit -L xbmc:5000:MediaUser [global] workgroup = PRIVE server string = %h server dns proxy = yes ; name resolve order = lmhosts host wins bcast #### Networking #### # interfaces = 127.0.0.0/8 eth0

Hi Louis Thank you! As i wrote in my first post, i tried even with these settings: client max protocol = SMB3 client min protocol = SMB2 client signing = required server signing = required But it was not working - as soon I use RequireSecuritySignature=1 on the client. It seems for that the client is stopping communication since the Win7-client expects something

Hai Batiste, Ok, thanks for these, i'll test that also. And the "why" is a bit more explained here. http://www.citi.umich.edu/projects/nfsv4/crossrealm/libnfsidmap_config.html and per example, http://www.citi.umich.edu/projects/nfsv4/crossrealm/ldap_server_setup.html First my work here, but this is a good one which i also need to adjust in my scripts, so thank you for asking

Get this, https://raw.githubusercontent.com/thctlo/samba4/master/samba-collect-debug-info.sh Run it, anonymize it and post it. For both AD-DC's. I want to see a full check on the base setup of the server. If you dont mind ;-) Greetz, Louis > -----Oorspronkelijk bericht----- > Van: samba [mailto:samba-bounces at lists.samba.org] Namens > basti via samba > Verzonden:

This looks all good to me but the problem lays in the DC winbind code, not the member. You can try to witch back ( temperarly ) to winbind ( on the DC ) As i did, al least you get the correct id's back. ( for now ) For you this the change you need on the DC. server services = -winbindd +winbind Im recompiling the samba 4.3.3 from sid now atm, so ill test them out what happpens.

But these are online for almost a year now... ;-) https://github.com/thctlo/samba4/tree/master/howtos The only thing is these are not useing "my" builded packages but the original debians. I'll update these somewhere today or next week also with the 4.8 parts added. Basicly its, follow the howtos until you need to install samba. And just before that, run this. echo "deb

Le 03/05/2019 à 16:20, L.P.H. van Belle a écrit : > Hai, > > wbinfo -Y S-1-5-21-2816186202-4468957523-2022743653-513 > Does this resolve? > You should see "domain users" I see 13010 (that's normal according to the doc) but wbinfo --sid-to-fullname S-1-5-21-2816186202-4468957523-2022743653-513 give me "domain users" > > And your missing your

Lol... I dont know.. and i did learn know most from you :-P And you have reset the idmap? Greetz, .. hihi... Louis > -----Oorspronkelijk bericht----- > Van: samba [mailto:samba-bounces at lists.samba.org] Namens Rowland penny > Verzonden: vrijdag 29 januari 2016 16:22 > Aan: samba at lists.samba.org > Onderwerp: Re: [Samba] Validate Ids Multiple DC > > On 29/01/16

Hai, Since your getting. finddcs: No matching server found > ERROR: Invalid IP address '3(NXDOMAIN)'! There is something wrong in the base of you setup. Check all DC's for ipnumbers (A) and PTR records. Dont forget to create the reverse zone yourself. https://wiki.samba.org/index.php/Samba_AD_DC_Troubleshooting

So if this is done, is edns configure also ? ? in resolv.conf add: options edns0 ? and, name.conf test these. ? ??????? //?The forwarded zone to the AD-DC DNS use these also. ????????//dnssec-must-be-secure?internal.domain.tld no; ????????//dnssec-must-be-secure 168.192.in-addr.arpa no; ????????// listen-on-v6 { ::1; };? // test what works best, if not all?ipv6 is disabled also?enable this

Editing the xml.. results in same error. ( which is logical ) The exact event from windows. Eventlog info: Source : Group Policy Scheduled Tasks. ID : 4098 USER : SYSTEM Error code : Group Policy object did not apply because it failed with error code '0x80070534 No mapping between account names and security IDs was done.' This error was suppressed. So I'll wait until this

check the output of : echo "\n" | testparm -vv | grep signing and echo "\n" | testparm -vv | grep protocol for my the default is : client max protocol = NT1 but i dont use signing. but i "think" you need to set the client signing = manadatory and client max protocol = SMB2 ( from man smb.conf ) but if anyone know this better on the list, please