similar to: glusterfs + ctdb + nfs-ganesha , unplug the network cable of serving node, takes around ~20 mins for IO to resume

Hi Dan, On Mon, 25 Feb 2019 02:43:31 +0000, "Liu, Dan via samba" <samba at lists.samba.org> wrote: > We did some failover/failback tests on 2 nodes（A and B） with > architecture 'glusterfs + ctdb(public address) + nfs-ganesha'。 > > 1st: > During write, unplug the network cable of serving node A > ->NFS Client took a few seconds to recover to conitinue

Hi, I''m new at traffic control and was reading up on HTB and using it to put an upper limit on traffic. I have a 256k DSL with 64k upload (which translates to about 5/6KB uploads). The machine running the P2P applications keeps filling up the 64K so my browsing from other machines in the network ends up being very slow. Since there are several P2P applications, I wanted to set the

Martin, I have checked more logs. Before ctdb-eventd went away, system memory utilization is very high, almost 100%. Is it related to "Bad talloc magic value - wrong talloc version used/mixed"? 2018/08/14 15:22:57.818762 ctdb-eventd[10131]: 05.system: WARNING: System memory utilization 95% >= threshold 80% 2018/08/14 15:22:57.818800 ctdb-eventd[10131]: 05.system: WARNING: System

Hi Benedikt, On Thu, 16 May 2019 10:32:51 +0200, Benedikt Kaleß via samba <samba at lists.samba.org> wrote: > Hi everybody, > > I just updated my ctdb node from Samba version > 4.9.4-SerNet-Debian-11.stretch to Samba version > 4.9.8-SerNet-Debian-13.stretch. > > After restarting the sernet-samba-ctdbd service the node doesn't come > back and remains in state

Hi to all, I'm having a CTDB-Cluster with two nodes (both Ubuntu wit Sernet-packages 4.17.4). Now I want to replace one of the nodes. The first step was to bring a new node to the CTDB-Cluster. This time a Debian 11 but with the same sernet-packages (4.17.4). Adding the new node to /etc/ctdb/nodes at the end of the list. And the virtual IP to /etc/ctdb/public_addresses, also at the end

µÚÎå½ì±±¾©¡°¹ú¼ÊÖÜ¡±³ÏÑûÄúµÄ(¹«Ë¾¡¢ÆóÒµ)²Î¼Ó -- Öйú±±¾©¹ú¼Ê¿Æ¼¼²©ÀÀ»áôßÖйú±±¾©¸ßм¼Êõ²úÒµ¹ú¼ÊÖÜ ¡°ÊÀ½ç500Ç¿CEOÓëÖйú¶¥¼¶ÆóÒµÊ×ÄÔÂÛ̳¡± »áÒé˵Ã÷£º ¾­ÖлªÈËÃñ¹²ºÍ¹ú¹úÎñÔºÅú×¼£¬ ÖлªÈËÃñ¹²ºÍ¹ú¿Æѧ¼¼Êõ²¿¡¢Í⾭󲿡¢½ÌÓý²¿¡¢ÐÅÏ¢²úÒµ²¿¡¢Öйú¹ú¼ÊóÒ×´Ù½øίԱ»á¡¢¹ú¼Ò֪ʶ²úȨ¾ÖºÍ±±¾©ÊÐÈËÃñÕþ¸®¹²Í¬Ö÷°ì£¬ ±±¾©ÊÐó´Ù»á³Ð°ìµÄ¡ª¡ªµÚÎå½ìÖйú±±¾©¸ßм¼Êõ²úÒµ¹ú¼ÊÖÜ(ÒÔϼò³Æ¿Æ²©»á(¹ú¼ÊÖÜ)£¬

µÚÎå½ì±±¾©¡°¹ú¼ÊÖÜ¡±³ÏÑûÄúµÄ(¹«Ë¾¡¢ÆóÒµ)²Î¼Ó -- Öйú±±¾©¹ú¼Ê¿Æ¼¼²©ÀÀ»áôßÖйú±±¾©¸ßм¼Êõ²úÒµ¹ú¼ÊÖÜ ¡°ÊÀ½ç500Ç¿CEOÓëÖйú¶¥¼¶ÆóÒµÊ×ÄÔÂÛ̳¡± »áÒé˵Ã÷£º ¾­ÖлªÈËÃñ¹²ºÍ¹ú¹úÎñÔºÅú×¼£¬ ÖлªÈËÃñ¹²ºÍ¹ú¿Æѧ¼¼Êõ²¿¡¢Í⾭󲿡¢½ÌÓý²¿¡¢ÐÅÏ¢²úÒµ²¿¡¢Öйú¹ú¼ÊóÒ×´Ù½øίԱ»á¡¢¹ú¼Ò֪ʶ²úȨ¾ÖºÍ±±¾©ÊÐÈËÃñÕþ¸®¹²Í¬Ö÷°ì£¬ ±±¾©ÊÐó´Ù»á³Ð°ìµÄ¡ª¡ªµÚÎå½ìÖйú±±¾©¸ßм¼Êõ²úÒµ¹ú¼ÊÖÜ(ÒÔϼò³Æ¿Æ²©»á(¹ú¼ÊÖÜ)£¬

Thanks, i added "Environment=PATH=$PATH:/usr/local/samba/bin:/bin". Needed also to add "/bin" because couldnt find "sleep". Thats the script now: ---- [Unit] Description=CTDB Documentation=man:ctdbd(1) man:ctdb(7) After=network-online.target time-sync.target ConditionFileNotEmpty=/usr/local/samba/etc/ctdb/nodes [Service]

Hi Stefan, On Thu, 26 Jan 2023 16:35:59 +0100, Stefan Kania via samba <samba at lists.samba.org> wrote: > I'm having a CTDB-Cluster with two nodes (both Ubuntu wit > Sernet-packages 4.17.4). Now I want to replace one of the nodes. The > first step was to bring a new node to the CTDB-Cluster. This time a > Debian 11 but with the same sernet-packages (4.17.4). Adding the

Hi everybody, I just updated my ctdb node from Samba version 4.9.4-SerNet-Debian-11.stretch to Samba version 4.9.8-SerNet-Debian-13.stretch. After restarting the sernet-samba-ctdbd service the node doesn't come back and remains in state "UNHEALTHY". I can find that in the syslog: May 16 11:25:40 ctdb-lbn1 ctdb-eventd[13184]: 50.samba: samba not listening on TCP port 445 May 16

Hai, Hmm, about .. > "Environment=PATH=$PATH:/usr/local/samba/bin:/bin". > Needed also > to add "/bin" because couldnt find "sleep". /bin should be found in $PATH.. In since it looks like it does not. Then i suggest this: Environment="PATH=$PATH:/usr/local/samba/bin:/usr/local/samba/sbin:/bin:/sbin:/usr/bin:/usr/sbin" # to make sure you

On 03/03/2020 09:13, Ralph Boehme via samba wrote: > Am 3/3/20 um 10:05 AM schrieb Micha Ballmann via samba: >> Mar? 3 09:50:50 ctdb1 systemd[1]: Starting CTDB... >> Mar? 3 09:50:50 ctdb1 ctdbd[24663]: CTDB starting on node >> Mar? 3 09:50:50 ctdb1 ctdbd[24667]: Starting CTDBD (Version 4.11.6) as >> PID: 24667 >> Mar? 3 09:50:50 ctdb1 ctdbd[24667]: Created PID file

Hi Bob, On Tue, 29 Sep 2020 18:27:00 -0400, Robert Buck via samba <samba at lists.samba.org> wrote: > When I try to enable CTDB to manage (legacy) SMB and Winbind, I get startup > errors. > > Sep 29 22:23:06 euw2-samba-server-c21-01 ctdb-eventd[1509]: *49.winbind: > Failed to start winbind* > > Sep 29 22:23:06 euw2-samba-server-c21-01 ctdb-eventd[1509]: *startup

Hi, i updated the variables for my scenario. But CTDB wont start: Mar? 3 09:50:50 ctdb1 systemd[1]: Starting CTDB... Mar? 3 09:50:50 ctdb1 ctdbd[24663]: CTDB starting on node Mar? 3 09:50:50 ctdb1 ctdbd[24667]: Starting CTDBD (Version 4.11.6) as PID: 24667 Mar? 3 09:50:50 ctdb1 ctdbd[24667]: Created PID file /usr/local/samba/var/run/ctdb/ctdbd.pid Mar? 3 09:50:50 ctdb1 ctdbd[24667]: Removed

Ok, thanks. [root at euw2-samba-server-c21-01 ec2-user]# systemctl status winbind.service *?* winbind.service - Samba Winbind Daemon Loaded: loaded (/usr/lib/systemd/system/winbind.service; enabled; vendor preset: disabled) Active: *failed* (Result: exit-code) since Wed 2020-09-30 12:58:25 UTC; 1s ago Docs: man:winbindd(8) man:samba(7) man:smb.conf(5)

Hello, we are using ctdb 4.15.5 on RHEL8 (Kernel 4.18.0-372.32.1.el8_6.x86_64) to provide NFS v3 (via tcp) to RHEL7/8 clients. Whenever an ip takeover happens most clients report something like this: [Mon Feb 13 12:21:22 2023] nfs: server x.x.253.252 not responding, still trying [Mon Feb 13 12:21:28 2023] nfs: server x.x.253.252 not responding, still trying [Mon Feb 13 12:22:31 2023] nfs: server

Ah, yes, thats it Ralph.. Good one. Then in the systemd.service file you need to add. [Service] Environment=PATH=$PATH:/usr/local/samba/bin > -----Oorspronkelijk bericht----- > Van: samba [mailto:samba-bounces at lists.samba.org] Namens > Ralph Boehme via samba > Verzonden: dinsdag 3 maart 2020 10:13 > Aan: Micha Ballmann; Anoop C S > CC: samba at lists.samba.org >

Hi I''m testing around with xen 3.0 snapshot from last week. And i''m now having a problem with a xenbr which is based on a vlan if (dot1q). this is all in dom0 os: debian testing network: tg3 I can start the bridge based on my normal physical eth0 which is working without any problems. My clan without bridge is also working. I can start the bridge based on a vlan if with help

When I try to enable CTDB to manage (legacy) SMB and Winbind, I get startup errors. Sep 29 22:23:06 euw2-samba-server-c21-01 ctdb-eventd[1509]: *49.winbind: Failed to start winbind* Sep 29 22:23:06 euw2-samba-server-c21-01 ctdb-eventd[1509]: *startup event failed* Sep 29 22:23:06 euw2-samba-server-c21-01 ctdbd[1507]: *startup event failed* Sep 29 22:23:11 euw2-samba-server-c21-01 ctdbd[1507]:

ÈÈÃŵÄѧ¿Æ ȨÍþµÄ»ú¹¹ Ò»Á÷µÄר¼Ò ×îеÄÄÚÈÝ Áé»îµÄÊÚ¿Î »ªÖпƼ¼´óѧ½¯ÊÏ»ù½ð¹¤ÒµÅàѵÖÐÐÄ ±±¾©ÏÖ´ú׿Խ¹ÜÀí¼¼Êõ½»Á÷ÖÐÐÄ ÔÚÖ°ÈËÔ±ÏîÄ¿¹ÜÀíÑо¿Éú¿Î³Ì½øÐÞ°à ÕÐ Éú ¼ò Õ һ¡¢ÏîÄ¿¹ÜÀíÑо¿Éú¿Î³Ì½øÐÞ°àµÄ¿ªÉè±³¾°