similar to: Samba 4.5: trying to setup an omnios system as a DC member

Hello Rowland, thanks, configuring the uidNumber and gidNumber on the AD fixed the issue, now getent passwd works. I just have one remaining issue, it seems the ACL doesn't work. As an example when I set ACL with full permission for user andrea: # /usr/bin/ls -ldV /cache/testsamba/ d---------+  3 root     root           5 Jun 19 19:40 /cache/testsamba/            

On Tue, 19 Jun 2018 16:10:33 +0200 Andrea Cucciarrè via samba <samba at lists.samba.org> wrote: > Hello, > > I'm trying to setup an omnios system as a Samba DC member, and I need > AD backend for consistent IDs on all Samba clients. > The AD join is successful, the wbinfo shows the AD users > > # /opt/samba/bin/wbinfo -n andrea >

Hello, I'm running Samba 4.9.5 as domain member, when I bring down the current Window DC (10.50.50.187) the winbind seems to hang instead of switching to the other available DC (10.50.50.25) The "net ads" command show that Samba switched to the other available DC: net ads join -U 'administrator' -S 'PAVONE.HYPERFILE.LOCAL' 'HYPERFILE.LOCAL'^C root at

Hello, I have just realized that winbind rid idmapping create the following idmapping for user, below an example: # id HYPERFILE\\simone *uid=11663*(HYPERFILE\simone) gid=10513(HYPERFILE\domain users) groups=10513(HYPERFILE\domain users),*11663*(HYPERFILE\simone),3011(BUILTIN\users) I'm confused about group mapping 11663(HYPERFILE\simone), winbind created a mapping for a group that has

Hello, I have successfully (hopefully) configured samba to run in Kubernetes pods, basically I have a pod (i.e. container) that run winbindd and join the Windows AD, and a pod (i.e. container) that run smbd. I have used socat to allow the unix socket communication between winbindd and smbd pods: *** winbindd pod *** UID??????? PID? PPID? C STIME TTY????????? TIME CMD root???????? 1???? 0? 0

On Thu, Oct 29, 2020 at 7:21 AM Rowland penny via samba < samba at lists.samba.org> wrote: > On 29/10/2020 11:04, Andrea Cucciarre' via samba wrote: > > Hello, > > > > I have just realized that winbind rid idmapping create the following > > idmapping for user, below an example: > > > > # id HYPERFILE\\simone > > *uid=11663*(HYPERFILE\simone)

On Wed, Jun 20, 2018 at 09:15:19AM +0200, Andrea Cucciarrè via samba wrote: >     vfs objects = acl_xattr man vfs_zfsacl -slow -- Ralph Boehme, Samba Team https://samba.org/ Samba Developer, SerNet GmbH https://sernet.de/en/samba/ GPG Key Fingerprint: FAE2 C608 8A24 2520 51C5 59E4 AA1E 9B71 2639 9E46

Hello, I'm trying to access a Samba share as anonymous/guest user, so I have added the following entry inf file smb.conf (Samba 4.9) guest account = andrea map to guest = bad user ... [test] available = yes browsable = yes guest ok = yes nfs4: acedup = merge nfs4: mode = special path = /var/tmp/test read only = no and the shared directory /var/tmp/test has the following permission (so

I have checked the DNS configuration as you recommended, and run more tests. It seems that winbidndd recover itself within about 10 minutes after the DC has been shutdown, not sure where that sort of timeout comes from :( # sleep 60; while true; do date; wbinfo -u; sleep 60; done Thu Aug? 1 16:39:32 CEST 2019 HYPERFILE\guest HYPERFILE\defaultaccount HYPERFILE\krbtgt HYPERFILE\administrator

A little summary of building Samba 4.12.0rc3 on OmniOS: The following 4 (5) small patches are needed in order to compile and run Samba 4.12.0rc3 on the latest OmniOS r151032p (OpenSolaris/Illumos variant): 1. ARRAY_SIZE is already defined in <sys/sysmacros.h> on OmniOS, put an #ifndef around it in lib/replace/replace.h (can be ignored but causes a gazillion compiler warnings :-):

Hi, just out of curiosity why? Is it a personal challenge? On 9/22/20 1:37 PM, Andrea Cucciarre' via samba wrote: > Hello, > > I have successfully (hopefully) configured samba to run in Kubernetes > pods, basically I have a pod (i.e. container) that run winbindd and join > the Windows AD, and a pod (i.e. container) that run smbd. > I have used socat to allow the unix

Dear I have connected samba 3.6.8 to my Active Directory in the lsass.exe run to 100% When stopping winbind the lsass.exe CPU is down to 0% When set winbindd to debug mode, it seems it try to scan the root user every time. I would to know how to ban nsswitch to query winbindd for system internal users such has root, apache..... Here it is my nsswitch.conf : # # Example configuration of GNU

Dear NUT users, I have installed OmniOS+ napp-it on a HP Proliant n54l. This box is powered by a cyberpower CP1500PFCLCD ups. I have installed nut thanks to that link: http://wiki.openindiana.org/oi/Network+UPS+Tools+(NUT)+and+NUT+Monitor The issue is that the driver does not load at startup - but it does if i start it as root using upsdrvctl -u root start. Beside the startup driver launch,

Arno, what version of Solaris or libusb required the interrupt pipe hack? - Charles On Dec 19, 2014, at 7:00 AM, Arnaud Quette <arnaud.quette at gmail.com> wrote: > Hi Matej, > > I've cc'ed the developers mailing list for now... > > thanks for your report. Could you please send in some driver debug traces (starting it manually, using "usbhid-ups -DDDDD

Hi Matej, I've cc'ed the developers mailing list for now... thanks for your report. Could you please send in some driver debug traces (starting it manually, using "usbhid-ups -DDDDD ...")? That would help in troubleshooting the issue. thx and cheers, Arno 2014-12-19 8:48 GMT+01:00 Matej Sekoranja <matej.sekoranja at gmail.com>: > > Update: driver is not stable. I

Thank you for this quick answer Louis. On DC: On DC I had to add one line to have winbind retrieving uidNumber AD field rather than having Winbind chosing some random UID for my users. This line is: idmap_ldb:use rfc2307 = yes as explained in https://wiki.samba.org/index.php/Setting_up_RFC2307_in_AD That's a start. Unfortunately winbind is still giving my users GID number set to 100,

Hi all, How can we configure winbind to retrieve uidNumber and gidNumber declared in AD? Thanks and regards, mathias

On Wed, 23 Jan 2019 16:56:42 +0100 Andrea Cucciarre' via samba <samba at lists.samba.org> wrote: > Hello, > > I'm trying to access a Samba share as anonymous/guest user, so I have > added the following entry inf file smb.conf (Samba 4.9) > > guest account = andrea > map to guest = bad user > ... > [test] > available = yes > browsable = yes >

I'm not sure I have understood, I'm mounting the share as "urca" user, which is not a known user. Although I'm setting smb.conf so that for guest user it uses the privileges of the known user "andrea" Could you please advice on what I should set for "guest account" in smb.conf? Thanks Andrea Il 1/23/2019 5:15 PM, Rowland Penny via samba ha scritto:

Quoting Adam Tauno Williams <awilliam at whitemice.org>: >>>> It should work, it sounds like a mis-configuration somewhere, can you >>>> post the smb.conf, /etc/nsswitch.conf, /etc/resolv.conf and >>>> /etc/krb5.conf from the member server. >>> "wbinfo -u" lists 415 lines >>> "getent passwd" returns 93 lines