similar to: Two Samba 4 AD DC, a VPN

Hello, hello Rowland, So the physical configuration is something like below : +-------------------------------+ server_a   Samba AD DC   Domain: mycompany.net   Subnet: 192.168.1.0/24   IP    : 192.168.1.2 +-------------------------------+ +-------------------------------+ pc_a_1   FQDN: pc_a_1.mycompany.net.   IP:   192.168.1.33 +-------------------------------+

Hello, My post is about having two Samba 4 AD DC at two different geographical places and access resources bidirectionnaly through a VPN as summarized in the schema below. ------------------------- Geographical site 1 ------------------------- - AD DC: Samba 4.1.4 - LAN_1 IPs: 192.168.1.0/24 - Machines DNS names: <hostname>.company.lan - Some machines do not move from this site. - Some

On Fri, 6 Apr 2018 08:01:50 -0700 (MST) Lea Massiot via samba <samba at lists.samba.org> wrote: > Hello, > > My post is about having two Samba 4 AD DC at two different > geographical places and access resources bidirectionnaly through a > VPN as summarized in the schema below. > > ------------------------- > Geographical site 1 > ------------------------- > -

hello all, i have two asterisk server for call transfer and one more asterisk server for agent login(server_X) where agent take the call. server_A and server_B server_A is connected with pri and configure with 60 channel for call transfer into server_X server_B is connected with pri and configure with 30 channel for call transfer into server_X my query is that some time two call originate same

I have two server Server_A(outbound call) for agent login and agent make a outbound call from here and pass into server Server_B call extension.conf exten => _91XX.,1,AGI(agi://127.0.0.1:4577/call_log) exten => _91XX.,n,Dial(SIP/${EXTEN}@192.168.53.197,,tToR) exten => _91XX.,n,hangup() Server_B[192.168.53.197] for call forwarding extension.conf exten =>

> I have done the sync manually with "doveadm sync" command. But, I have not configured the replication yet. If you don't tell dovecot where to replicate, nothing gets replicated. > I am looking at the below webpage for the replication. > > https://wiki.dovecot.org/Replication <https://wiki.dovecot.org/Replication> > > I am using the dovecot version

Hi Gerald, Thank you for the details. As per your suggestion, I have made the changes to dovecot.conf file. Still I don't see any replication is happening. Please see the dovecot.conf file. I do not see "/etc/dovecot/conf.d/12-replication.conf" in my servers. So I had put everything in the dovecot.conf file only. Please see the complete data in it below. The below data is in

Hello, I have the following construction : Provider --> SipAgent (asterisk) --> Asterisk Server_A --> IP-phone (Snom 370) If a call comes in from the "Provider" to my SipAgent, then my SipAgent send the call to the correct Asterisk Server_A (dialplan logic based on number). The Asterisk Server_A takes the call and sends it to the IP-phone. My SipAgent has DirectMedia=yes

I have a working winbind on my Radados server that let's Ubuntu Gutsy workstartions authenticate from the server. I works great. A user account that exists on the server with a home directory is able to login to Ubuntu with GDM and have a Gnome desktop and their home directory is mounted from the server, all is good. The server has many shares that are being offered to users that are members

Hi, I manage an SBC which stands between my company server farm and some SIP telco trunks. The system works fine, for inbound and outbound calls. Now I've configured the SBC to also act as a registration proxy, forwarding SIP registrations coming from the Internet to my asterisk servers. It all seems fine, but it doesn't work well, because by the time at least one phone registers through

Hi, I have two DSL line from the different provider connected to my Linux Router Firewall. Server_A is behind the Linux Router Firewall. DSL0 -- | ---- LINUX_ROUTER_FW -- SERVER_A DSL1 -- I have the following IPTABLES command to make incoming access to Server A''s web service throught port 82 as below: - $IPTABLES -t nat -A PREROUTING -i eth1 -p tcp --dport 82 -j DNAT

On Oct 14, 2014, at 12:12 PM, Michael Stinaff <mstinaff at gmail.com> wrote: > I've used nut for simple configurations before but now one has grown to a more complex setup and can't seem to find any info online. > > I would like to have single central nut master monitor a bank of UPSs for a whole rack of servers with redundant PSUs. > > So > UPS A1 --->

Hi, I have setup a tunnel from server A to server B across WAN by running "ssh -l user_X -L port_A:server_B:port_B server_C -N". Server B is in a private network, so I have to establish the tunnel via server C, which is in the same LAN with B but has a public IP. The problem is, every time I start the tunnel on server B, the tunnel process will die nearly two hours later. And it

Thank you for the reply. I have done the sync manually with "doveadm sync" command. But, I have not configured the replication yet. I am looking at the below webpage for the replication. https://wiki.dovecot.org/Replication I am using the dovecot version "2.2.36". I am confused with what needs to be done after reading that page. 1. They are talking about v2.3.1 and v2.2+.

Maybe this will clear up what I was initially thinking. In this diagram all lines on the right of the UPSs are power lines and all lines on the left are serial/usb lines. .---. +--|UPS+-----+--------+--------+---... | | A1| | | | | '---' .---+--. .---+--. .---+--. | |Server| |Server| |Server| | | A1 | | A2 | |

Thank you, Louis, for your reply. By simply asking me to provide outputs of the aforementioned files, I found the cause of my first problem (auth failing). It was my /etc/hosts file on dc1. All of them should look like this, and indeed DC2 and DC3's *did* look like this: # cat /etc/hosts > 127.0.0.1 ? ? ? localhost.samdom.mycompany.net ?localhost > 192.168.3.201

And, BTW, right now, I am able to see my problem via the following 3 ways... 1) Through Windows DNS Manager, I cannot add, change or delete any DNS records from: mycompany.loc samdom.mycompany.net mycompany.net I *can* add, change and delete DNS records from: _msdcs.samdom.mycompany.net mycompany.com 7.168.192.in-addr.arpa 5.168.192.in-addr.arpa 3.168.192.in-addr.arpa

No, this is not needed. Solution here in this is simple. search primary.domain.tld # optional extra search domains after the primary. nameserver IP_AD-DC_OF_THIS_SERVER_FIRST nameserver IP_AD-DC_others Run : samba_upgradedns --dns-backend=BIND9_DLZ And your done, all needed records are fixed/updated. This goes wrong if the IP of the running server isnt the first and/or if search is setup

Louis, I appreciate your efforts with my predicament. I'm very sorry to say that your advice hasn't gotten me to a solution. After updating my /etc/network/interfaces to put my localhost IP address first (192.168.3.201, for example), saving, restarting services, rebooting, running "samba_upgradedns --dns-backend=BIND9_DLZ", saving, rebooting, etc., I still cannot add, edit or

Hi everyone, I'm relatively new to Samba - at least for more in-depth installations. Big Thank-You from my company to the brilliant developers responsible for this software. We have our Samba server integrated with our Windows 2003 AD domain users via Winbind - a working installation with some issues described below. getent passwd works as the many docs show (one entry below):