similar to: Replacing a hard drive

I am trying to install CentOS 4.6 to a pair of 750GB hard drives. I can successfully install to either of the drives as a single drive, but when I try to use both drives and mirror the partitions, I start having problems. Anaconda crashes as it is trying to format the drives. This is what I'm trying to create: /dev/md0: 200MB, /boot /dev/md1: 2GB, swap /dev/md2: rest of the

Hello I have an OS installation and data on a 40 gb drive that I would like to image to a 80 gb drive. I don't care if the resulting partition layout on the new drive is only 40 gb making me lose space. I just want to move everything from the older drive because I think it's failing. I have looked at partimage and mondo rescue as imaging solutions but both deal with partitions. CAn someone

One of my CentOS boxes has started giving me errors. The box is CentOS-4.4 (i386) fully updated. It has a pair of SATA drives in a software raid 1 configuration. The errors I see are: ata1: command 0xca timeout, stat 0x50 host_stat 0x24 ata1: status=0x50 { DriveReady SeekComplete } Info fld=0x1e22b8, Current sda: sense key No Sense ata2: command 0xca timeout, stat 0x50

Hello All: My research group recently invested in a 17 node Linux rackmounted cluster. It was delivered recently and, being the lowly graduate student that I am, I was told to 'make sure that it works.' After investigating it, I noticed a problem with two of the hard drives one nodes 14 and 16. On most of the nodes, a 'df -hT' will give you the following: Filesystem Type Size

Hi, i''m having problems attaching disks from a fc-san to a solaris 10 guest. xen host ist a opensolaris box "SunOS node1 5.11 snv_127 i86pc i386 i86xpv". my xen guest is named pg4. this command works fine. virsh attach-disk pg4 /dev/dsk/c8t600A0B800029D69A000013CA4B00E1ABd0 hdb and before i was able to import this volume as a zpool on the xen host - so connection to this

I sent this question to the OpenLDAP list yesterday, but I still haven't seen the message come across the list. I am asking here in the hopes of getting a faster response. I am trying to compile OpenLDAP 2.3.11 from source on CentOS4. I have the rpm for db4-4.2.52-7.1 installed and also a source build of BerkeleyDB in /usr/local/BerkeleyDB.4.4. How do I get OpenLDAP to link with the bdb

Hi, I'm currently experimenting with software RAID1 on a spare PC with two 40 GB hard disks. Normally, on a desktop PC with only one hard disk, I have a very simple partitioning scheme like this : /dev/hda1 80 MB /boot ext2 /dev/hda2 1 GB swap /dev/hda3 39 GB / ext3 Here's what I'd like to do. Partition a second hard disk (say, /dev/hdb) with three

I have a 100G disk on an old redhat 7.3 system. Filesystem Size Used Avail Use% Mounted on /dev/hda1 9.6G 2.4G 6.7G 27% / /dev/hda3 99G 6.1G 88G 7% /home hda2 is 2G swap I am trying to back that complete image up on my centos 5 system. I can do the dd if=/dev/hda bs=1M | ssh root at machine 'cat > disk.img' which gets me the whole 100G. As

hi i am a complete newbie to xen, and i have still a problem with hda(hdc): lost interrupt coming from the 2.6.10-xen0 kernel on an asrock k7s8x board with an additional promise 100 controller(doesn''t get recognized anyway) an amd athlon 2400+ and 512 mb ram. an ideas? regards toby ------------------------------------------------------- SF email is sponsored by - The IT Product

Hi, I''m the Mageia XEN packager and during QA, we stumbled into a problem. in fact, we wanted to test Mageia 3 installation on a HVM. so, we had a sparse image and a iso file: [ ''file:/opt/testhvm.img,sda,w'', ''file:/opt/mageialive.iso,hdb:cdrom,r'' ] the live booted, and was able to install to disk, but it never seemed to boot after the install...

first time poster here - hello everyone I started out with CentOS x86 5.3 with the following partitions on my source hard drive: /dev/hdc1 swap /dev/hdc2 / I did the following to migrate my CentOS box to the destination hard drive: 1. boot up with CentOS 5.3 livecd in rescue mode 2. partition destination hard drive (/dev/hdd) /dev/hdd1 swap /dev/hdd2 / 3. create the

Hi users, I was working with GNU parted and got some changes in the partition and the system crashed. I had to freshly install RH Linux 9 again as it didn't detect the linux installation. Now the problem is /dev/hda is mounted but not showing any data files. It has full of data originally. Anyhow Can i recover those data. I didnt format any of the hard drive expect the root partition for

Hi, I want to slowly migrate from Debian to CentOS, so I setup a multiboot on my main machine. There's a Debian Etch install on /dev/hda, and GRUB is also installed on the Debian side. On /dev/hdb, I have CentOS 5. I fdisked the drive manually, then chose manual partitioning during install. The setup for CentOS is: hdb1 -> swap hdb2 -> /boot, ext2 hdb3 -> / , ext3 After

Hello list. Since morning I have an emergency. After last kernel update one of my servers didn't start. On display I see only "GRUB" :( I have 2 more servers based on CentOS too, but after the same update this servers works. All servers have 2 HDs and works as software mirror. I have started damaged machine using Knoppix and I can see partitions and data on both disks. Of course I

Has anyone had issues starting xen0 on a md? I have installed it a few times now w/ and w/o raid. Anytime I have a raid1 mirror, Xen panics on boot when trying to mount /. It gets past waiting for /dev/md0 to appear. John _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Has anyone had issues starting xen0 on a md? I have installed it a few times now w/ and w/o raid. Anytime I have a raid1 mirror, Xen panics on boot when trying to mount /. It gets past waiting for /dev/md0 to appear. John _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

I am considering changing my server from Ubuntu to Centos. I have been tinkering with a box that will eventually become a new server. I am having a problem. This box has two ide drives. Originally I had a Ubuntu desktop installed on hda and then added a Centos server installed on hdb. I wanted to try a different server configuration without overwriting the current install on hdb. With the server

Hi there, I am using tar to backup the whole system (specific directorues usr,lib,sbin,etc,var,home,root). On bare metal recovery I install the minimal portion of the syetm and then I throw the tarballs. Any opinions? D. Karapiperis -------------- next part -------------- An HTML attachment was scrubbed... URL:

My apologies if this is a bit off topic... I am going to start doing backups to removable hard drives and I will need to send these hard drives to an off-site storage facility. I am looking for some way to protect the drives after I pull them out of the system. I was hoping to find some kind of clamshell enclosure similar to what is used with external hard drives, but so far I haven't found

Im brand new to rsync and i been doing alot of reading about it and it looks like the tool I have long been wanting. Bascially i got 1 server, 2 hard drives. partions are / /boot /home /usr /var /backup (2nd drive) Bascially what i am looking at doing is mirroring the first drive to the 2nd drive, and once that intial one is moved over, have a cron run nightly (or when specified) that will