similar to: Samba Hylafax PAM

O, try the following.   Test this first. ldd /usr/sbin/hfaxd  if you getting libpam.so..  something, then hylafax is compiled with pam support.   Next,   apt-get install libpam-ldap   ( just to be sure, i do believe you have installed it already )   create the file :  /etc/pam.d/hylafax Add :   auth         required       pam_ldap.so account   required       pam_ldap.so

Hai, I dont have hylafax running atm, but can you check for the following. /etc/pam.d/common-account/password/session .. etc. and pam_ldap Look for any : minimum_uid=1000 if you see that, remove "minimum_uid=1000" And whats the UID for user : hylafax After the changes, stop nslcd. Restart samba Restart hylafax If needed reboot the server. And check again. This is the

Hi, I got the same problem with Build 10162. I dont think it's an Samba issue. It seems that Windows 10 dont like "\\....\netlogon". Our Samba 3.5.6 PDC works like a charm for win 7. From my Win10 PC i can access everything except \\dc1\netlogon Symptoms: Accessing \\dc1\netlogon -> Auth fail Accessing \\dc1\netlogon2 -> Works (same config!!!) Accessing \\dc1\s1\netlogon

any messages in the windows 10 event logs, that could give some extra insight. according to https://social.technet.microsoft.com/Forums/en-US/7f5207cc-b202-47fc-bbb8-9ebe46a31961/network-logon-script-failure?forum=WinPreview2014General >\\foo.lan\netlogon should work. but, https://adsecurity.org/?p=1405 has some good info about the latest patch about hardening GPO. (which imo wil be

Hi Folks, after some days of intensive google-work I didn't find a solution for joining Windows 10 Clients (release version) to Samba 3.6.6 LDAP based NT Domain. I know, that I should switch to Samba4 but we got hundreds of scripts, services, devices and other stuff (our coffeemachine estimates the preferred strength for each user ... mission critical ;) ) that use the ldap service for

what if you try to change . msdfs:dc1\netlogon to msdfs:dc1.your.domain.tld\netlogon or use Accessing \\dc1.your.domain.tld\netlogon greetz, Louis >-----Oorspronkelijk bericht----- >Van: samba [mailto:samba-bounces at lists.samba.org] Namens >Marcel Ebbrecht >Verzonden: donderdag 9 juli 2015 10:42 >Aan: samba at lists.samba.org >Onderwerp: [Samba] Windows 10 in

Hi, My initial setup for receiving faxes worked as follows: fax call arrives on ISDN BRI connected to a BOSCH PBX, signal sent to ALCATEL PBX via PRI QSIG then finally sent to ASTERISK via PRI EUROISDN. The Asterisk server then forwarded the call to a iaxmodem and HylaFax received the data. All worked fine. Now I got rid of both BOSCH and ALCATEL in the "fax path" and it's as

I have an issue where * tries to route a call over IAX to another server even if the server is down. I have included the relevant entries from my iax.conf, extensions.conf, and some debug output. If someone could tell me what I have configured incorrectly, I would appreciate it. Thanks, Stephen -----------iax.conf on voip2---------- [voip1] type=friend username=voip1 host=x.x.x.x (ip

Hello, I'm french, so excuse my poor English. I'm face to a terrible thing, with has stole a lot of my time. On the .184 machine, I've the following iax.conf : [general] rtcachefriends=yes bandwidth=high tos=reliability jitterbuffer=no autokill=yes #include "iax.voip1.conf" #include "iax.renoir.conf" The iax.voip1.conf file contains : [VOIP1] type=friend

Hi, I just upgraded from 1.2 to 1.4. In 1.2, when I did a "show uptime" I used to see a second line telling me the time since the last reload. Has this been removed in 1.4? The following is the output of my two test boxes: Connected to Asterisk 1.4.18.1 currently running on voip2 (pid = 10605) Verbosity is at least 3 voip2*CLI> show uptime System uptime: 15 hours, 55 seconds

I am having trouble getting Asterisk to compile the zaptel stuff. Here are the specifics: Linux Kernel 2.5.9-42.0.8.EL Asterisk 1.4.0 I compiled libpri, zaptel, asterisk and asterisk-addons (in that order). This is a fresh install of CentOS. Following the CentOS install, I did "yum -y update" until there were no updates left. Here is my src directory: drwxr-xr-x 24 root root

Has anyone seen this before? This channel is consistently present on both of my asterisk servers. Sometimes they disappear for a few seconds and then come back. It always has the same Call ID. voip1*CLI> sip show channels Peer User/ANR Call ID Seq (Tx/Rx) Lag Jitter Format 192.168.0.102 (None) df92fb1b-8a 00101/03059 00000ms 0000ms UNKN

Arnaud, I'm seeing an error with the XML/HTTP driver in NUT: (from http://buildbot.ghz.cc/public/nut/MacOSX-10.4-G4/builds/3/step- compile/0 ) if gcc -DHAVE_CONFIG_H -I. -I../../drivers -I../include -I../../ include -I/sw/include -g -Os -pipe -pipe -Ddarwin8 -I/System/Library/ Frameworks/System.framework/PrivateHeaders -I. -I/usr/include - DMGEXML_MODE -DMGE_MODE -O -Wall

Hi all, Today I got problem below and my domU become unresponsive and I should restart the pc to make it running properly again. [ 240.172092] INFO: task kworker/u:0:5 blocked for more than 120 seconds. [ 240.172110] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 240.172376] INFO: task jbd2/xvda1-8:153 blocked for more than 120 seconds. [ 240.172388]

Hi, I'm trying to get zapras do work, I had downloaded the pppd-source and the 2 patches. I succefull compiled and install the patched version of pppd, but got this error in message-log Jul 15 11:43:32 voip1 pppd[9296]: In file /etc/ppp/filters: unrecognized option 'active-filter' Jul 15 11:43:57 voip1 pppd[9299]: Plugin zaptel.so loaded. Jul 15 11:43:57 voip1 pppd[9299]: Zaptel

Hi, Sometimes my asterisk server stops. (after a day or two) Last output from CLI is: -------------------------------- -- Registered SIP '000b82017eb7' at 213.237.12.125 port 11620 expires 120 -- Channel 0/26, span 1 got hangup -- Hungup 'Zap/26-1' voip1*CLI> Disconnected from Asterisk server Executing last minute cleanups Asterisk cleanly ending (0).

My VoIP provider allows me to have more than one call outbound on the same line simultaneously, for some reason. I am pretty sure that they do not want this to happen, so I'd like instead to limit each line to one call. I do not want the users to have to dial another prefix to go out on another line. Is there any way to add multiple accounts for my _9. extension and have Asterisk

I constantly get the following error messages in /var/log/asterisk/messages: Dec 8 10:52:57 WARNING[1009521664]: File chan_iax.c, Line 3324 (iax_ack_registry): Received unsolicited registry ack from '192.168.0.1' Dec 8 10:52:57 WARNING[1009521664]: File chan_iax.c, Line 4181 (socket_read): Registration failure Where 192.168.0.1 is another asterisk server. Below are the local and

Have an interesting one here, originally found on xen 4.1.0 but just upgraded to xen 4.1.1 and it''s still here. Creating a VM with a tap2 device pointed at /dev/mapper/something, when that device doesn''t exist, causes the tapdisk2 process to go into D mode and also manages to take out any process that queries it. For example, I have /dev/mapper/nathanxenuk1 as a valid disk

Hello, having spent many hours scouring archives, docs, books and googling without finding an answer I need to ask your help on this. running samba 3.4.0-3ubuntu5.3 on ubuntu 9.10 server, client users can login to the share from windows clients but the same users is denied access when connecting from OS X via GO/Connect To Server in format smb://fqdnofserver user authentication is to active