similar to: Samba 4 and MS Windows NFS Server (2012R2) - Update

Try this on your samba DC. amba-tool spn list PCNAME$ You should see something like: PCNAME$$ User CN=PCNAME,CN=Computers,DC=internal,DC=domain,DC=tld has the following servicePrincipalName: HOST/PCNAME HOST/PCNAME.internal.domain.tld nfs/PCNAME.internal.domain.tld nfs/PCNAME.internal.domain.tld at YOUR_REALM can you confirm this for both your servers which

Hi, has anyone out there tried to get a Windows Server 2012R2 based NFS Server running against a Samba4 active directory? I'm currently doing some interop testing, and I cannot get a Windows Server 2012R2 based NFS server running when using samba as AD. As far as i can tell, the setup looks good: I've got Linux based NFS servers and clients (Ubuntu + SuSE) up and running fine (krb5

hai, The servers have "A and PTR" records? You have for both server these UPNs. nfs/${SETFQDN} ${SETHOSTNAME_CAPS}$ nfs/${SETFQDN}@${SAMBA_KERBEROS_REALM} ${SETHOSTNAME_CAPS}$ on the samba side the nfs spn is in you keytab file? and if your brave, read, * dont run it, since i did not test this with windows servers.

I've setup samba4 to authenticate against a separate LDAP server. I can ssh to my server but attempts to login to a windows7 member server using the ldap domain are not working. Relevant errors: [2014/07/18 06:46:28.177400, 3] ../source4/auth/ntlm/auth.c:270(auth_check_password_send) auth_check_password_send: Checking password for unmapped user [ldapdom]\[user]@[win7host]

Hello Andrew & Louis, Yesterday by around 1:30 PM we had the same issue. Samba AD kicked all of us out and RSAT did not connect to any domain controllers. /*Incidentally the RSAT that caused this error was running on Windows 7 Professional 64 Bit edition.*/ When I restarted the samba-ad-dc service, all started working well again. However, as mentioned again, I could not trace the error

New to linux and new to Samba so any direction in troubleshooting would be helpful. Here is what I have so far. Within a half an hour of a reboot of the server my cpu reaches high numbers and becomes slow to respond on all actions. With my limited understanding I have used vmstat to observe the system. I noticed is that the numbers of forks grows from 1-2k to 43k within 30 minutes after reboot. I

On 18/12/14 16:19, Germ van Eck wrote: > Not sure about the high CPU load, but you have the [netlogon] share > twice in your smb.conf. Your first matches mine, have you added the > second yourself? > The second one looks weird with 2 path definitions. > Cj Tibbetts schreef op do 18-12-2014 om 08:59 [-0700]: >> New to linux and new to Samba so any direction in troubleshooting

Hello List, I'm dealing with the following issue here: https://forum.zentyal.org/index.php?topic=25300.0 Although it starts with OpenChange, it ends with Samba4 so I very much hope that somebody on this list can help me out. Basically I try to authenticate users through the Outlook autoconfigurator using RPC-OVER-HTTP to a samba server. The problem is that in Samba4/LDAP I cannot have

Hello everybody, ? I have a new AD which is installed on a Windows Server 2019. Now I want to add a Samba DC to this AD. The Samba DC is in the same subnet. Samba Server: Ubuntu 18.04 Samba 4.10.6 ? The Windows AD has the following settings: PS C: \ Users \ Administrator> Get-ADForest ApplicationPartitions: {DC = DomainDnsZones, DC = mydom, DC = local, DC = ForestDnsZones, DC = mydom,

Thanks for your help. Here is a sanitized config from our dev system where I'm testing the Solaris patch. [global] workgroup = MYDOM netbios name = norm security = ADS log file = /var/log/samba/%m.log max log size = 50 dns proxy = no loglevel = 3 template shell = /usr/bin/bash winbind use default domain = true winbind enum users = yes winbind enum groups =

I say that I'm logged on a Windows 2012R2 server with domain administrator account (the server is naturally in the domain). When I add a user i've the message : an error has occurend contact your system adminsitrator. # Global parameters [global] workgroup = <domain> realm = <domain>.local netbios name = <PDC NAME> server role =

Hi again, Am Montag, 14. März 2016, 00:44:47 CET schrieb Markus Dellermann: > Am Donnerstag, 10. März 2016, 10:41:34 CET schrieb mathias dufresne: > Hi, Mathias and all > thank you for your answer. > > > Hi all, > > > > SPN = servicePrincipalName > > > > A simple search returning all servicePrincipalName declared in your AD: > > ldbsearch -H $sam

Hello I've a little problem : I can add samba4 user with net rpc command but with dsa.msc I've the error : "An error occured. Contact your administrator" ... However, I can add group by dsa.msc and modify an existing user ... I'm on jessie with Samba 4.1.17-Debian (Linux vspdc 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01) x86_64 GNU/Linux) An idea ? Regard

Hi, I have a test AD running Samba on Ubuntu that I sometimes poke with Sysinternal's ADExplorer. A few days ago I tried connecting to it, but got a short reply of "The directory service is not available." As it was working earlier, I tried finding the problem. After installing a few older releases, I found that it was working on Ubuntu 17.04, Samba 4.5.8 and stopped working on

Hi Mathias and all. Am Donnerstag, 24. März 2016, 13:26:12 CEST schrieb mathias dufresne: > Hi, > > I'm glad that helped you : ) > > About SPN, I found that link few days ago: > https://adsecurity.org/?page_id=183 > It tries to list the string values available usable for SPN. > > And it gives also that link: >

Hi! I've just tried to build NanoBSD from 7.0-STABLE sources with MODULES_WITH_WORLD knob enabled and it failed. Note that NanoBSD uses make -j3 by default and I have dualcore system. ===> sys/modules/nfslockd (depend) @ -> /usr/local/src/sys machine -> /usr/local/src/sys/i386/include echo "#define INET6 1" > opt_inet6.h awk -f @/tools/vnode_if.awk @/kern/vnode_if.src

Is there an r function that will be able to identify the computer the code is running on? I have some common code that I run on several computers and each has a database with a different server name - although the content is identical. I need to set thisServer depending on which machine the code is running on... something like... if(pcname = pc1) thisServer = 'SERVER1' if(pcname = pc2)

My NFS server is up and other clients can access x. One particular client can't. I tried to unmount the NFS share: [root at nfsclient ~]# umount -f /disk/x umount2: Device or resource busy umount.nfs: /disk/x: device is busy umount2: Device or resource busy umount.nfs: /disk/x: device is busy If I use df or lsof to try to figure out what process to kill, they hang. I am reluctant to just

As far as i know, as of samba 4, i dont do any registry changes anymore. And thinking.. even with samba 3 i did not set these on my win 7 systems. I still have few win 7 pc's connect to samba 3.6 PDC, without registry changes. But it all depends on correct dns / dns domainname /wins settings. ( for samba also, i always use "dns proxy = yes" ) If these arent correct, then the

Hello, I've got a little problem with NFSv4 + Kerberos. I can do a mount with Kerberos with a valid ticket, but read-only. After the mount -vvv -t nfs -o nfsv4,sec=krb5 nfsserver:/ /mount_test/ I can see: #klist: Feb 6 07:22:47 Feb 6 17:22:43 nfs/nfsserver at my.domain #/var/heimdal/kdc.log: 2013-02-06T07:28:26 TGS-REQ clientnfs at my.domain from IPv4:192.168.0.23 for nfs/nfsserver at