similar to: Samba server read issues

Hi I Have a problem: I'm sharing ~600 folders on my samba server: [SHARE 192.168.0.20] comment = Private share for host 192.168.0.20 browseable = yes writable = yes path = /var/archives/USERS/192.168.0.20 public=yes hosts deny = 192.168. EXCEPT 192.168.0.20 [SHARE 192.168.0.21] comment = Private share for host 192.168.0.21 browseable = yes writable = yes path =

Thanks Vardan, I will like to know if this scenario can work when peer is not having fixed ip and we use host = nasir.server.com ? also I have set insecure=invite,port what if i use insecure=no thanks again. Message: 24 Date: Tue, 11 May 2010 10:52:14 +0500 From: Vardan <hvardan71 at gmail.com> Subject: Re: [asterisk-users] Dialing a SIP Peer without using register strin To:

Yes this scenario works on my 2 systems which are at LAN. I made one system as server (192.168.0.20) and registered from other system... it is fine but now there is a different scene. actually there is a registered user named abc at system1 (192.168.0.20) having context [payasyougo] which is used to do outbound calls. we want to use this user's context and account so that when we register

Hi, I have a samba server (version 3.0.28). I have joined my server to my domain with no problems. Since I will have postfix in my machine, (to relay mails externally) I configured my /etc/resolv.conf with my external dns first and later my internal dns. The problem is that when I try to apply acl permissions on some folder (using setfacl) I cannot see the trusted domains, If I comment out the

Hi there I am wondering if anybody can help me illuminate a problem I am having with my asterisk installation. I am using: - IP phone (Siemens gigaset S685IP) behind a modem/router that has ports udp 5060 and 10000:10100 forwarded to the static ip of the IP phone (192.168.0.3). This has to go to: - modem that operates in half bridge mode (no nat) to a linux firewall (does natting ip is

Hi list I am having trouble getting asterisk to perceive the firewall's ip address as outside localnet (setting in sip.conf). The situation is this: - phones inside lan work fine when localnet is set to 192.168.0.0/255.255.255.0 - phones outside the lan can't ack the invite from asterisk because asterisk perceives the outside phone to originate from localnet as DNAT is done with iptables

Hi, I am new to this list and this is first time i m posting here. please help me out currently I am working on dialing a sip peer on an asterisk server from 2nd asterisk server. scenario is like this. on my system i am using this peer in sip.conf. [abc] type=peer username=abc secret=mysecret host=192.168.0.20 context=default dtmfmode=rfc2833 ;restrictcid=no canreinvite=yes

Hai, How is the swappiness set? cat /proc/sys/vm/swappiness Its probely set to 60, i suggest, lower it to 10 or 20. That wil help keeping the samba processes out of swap. I've see more programs gettting OOM Killed due too out of swap. echo 10 > /proc/sys/vm/swappiness Stop and start samba Greetz, Louis > -----Oorspronkelijk bericht----- > Van: samba

Hi Laurent, > > We upgraded a legacy (NT4) domain from 3.6 series to 4.8 and then 4.9.4 > samba version (using sernet subscription packages / debian stable) > > The setup is composed of 4 DCs with each 2 CPU/16GB RAM. > > We currently have ~700 user accounts / ~600 computers / ~150 groups > > Our mail setup, SSO, ... query the 4 DCs constantly. > > > Every 5 to

I am trying to set up rsync as a daemon under WindowsXP (professional) in order to be able to backup this machine on to a linux server. I am struggling with an issue I don't understand. I don't know whether it is an Rsync issue or a Cygwin issue, so I am asking both mailing lists. My WindowsXP machine has ip address 192.168.0.25 and name rabbit.home My Linux machine has ip address

Hi, Greg, Eddie, I found that in SR-IOV + HVM environment, ping latency depends on ping interval. The NIC is Intel 82576 (1000Mbps), server uses xen-4.0.1, domain-0 is kernel-2.6.32 and HVM is kernel-2.6.31. The server and client are connected through a 1000Mbps switch. The data is as following: # ping -i 1 192.168.0.21 PING 192.168.0.21 (192.168.0.21) 56(84) bytes of data. 64 bytes from

Been having a problem with my two Sipura 2000's dropping calls from the SPA-2000 side. Seems the calls are dropped right before the "Next Registration" time. Calls drop about ever 60 minutes or so. I have dialed from one port to the other and let it sit. After about 60 minutes or so the calls get dropped. System details are below Asterisk ver. CVS-HEAD-11/27/04-23:42:45 RHEL 3

I'm trying to get working a spa3000 with asterisk. My problem is I cant get wroking the incomming calls (I installed the lastest firmware). My problem is asterisk is rejecting the authentication from the spa3000. Asterisk answers forbidden (SIP/2.0 403 Forbidden) and I think I placed the username and password correctly... Sip.conf says this: [linea2] username=linea2 type=peer secret=1111

Hi, Recently we got a new feature request from our customer, they want a report to list the duration that agents putting customer on hold, they want to base on this to measure the agents performance. I cannot find any events in cdr, message logs, or manager interface, only when I enable sip debug, then I can see the ReInvite Event in the cli , some thing like the attached logs, is there any

Hi, I am using glusterfs 3.10.1 with 30 nodes each with 36 bricks and 10 nodes each with 16 bricks in a single cluster. By default I have paused scrub process to have it run manually. for the first time, i was trying to run scrub-on-demand and it was running fine, but after some time, i decided to pause scrub process due to high CPU usage and user reporting folder listing taking time. But scrub

Hello, I have my samba share running and I can access everything just fine from my windows XP work station. However I have a problem with macromedia homesite. I can see but not open the share because homesite thinks I do not have access. I have captured the network traffic with a sniffer and it seems the path is a problem.. Here is a snip of my network traffic where 192.168.0.9 is my linux

Hello! scp hangs while copying file over a certain size. Here's the output of scp in verbose mode: scp -v test.pdf pc: Executing: program /usr/bin/ssh host pc, user (unspecified), command scp -v -t . OpenSSH_5.1p1, OpenSSL 0.9.8j 07 Jan 2009 debug1: Reading configuration data /home/user/.ssh/config debug1: Applying options for pc debug1: Reading configuration data

Hi, I build a setup on a Debian Wheezy with samba 4.0.9 and a compiled bind 9.8.4 with this configure options: ./configure --prefix=/usr \ --mandir=\$${prefix}/share/man \ --infodir=\$${prefix}/share/info \ --sysconfdir=/etc/bind \ --localstatedir=/var \ --enable-threads \ --enable-largefile \ --with-libtool \ --enable-shared \ --enable-static \

Hi My first post get no answer :=<, i post new with new elements. I have two Asterisk server, running on Asterisk 1.6: SRV1 = 192.168.0.5 on Asterisk 1.6.1.4 SRV2 = 192.168.0.20 on Asterisk 1.6.1.8 I want create a link for exchange call. on Srv1: iax.conf: [general] bindport=4569 bindaddr=0.0.0.0 language=fr bandwidth=low jitterbuffer=no forcejitterbuffer=no autokill=yes

Hi, We upgraded a legacy (NT4) domain from 3.6 series to 4.8 and then 4.9.4 samba version (using sernet subscription packages / debian stable) The setup is composed of 4 DCs with each 2 CPU/16GB RAM. We currently have ~700 user accounts / ~600 computers / ~150 groups Our mail setup, SSO, ... query the 4 DCs constantly. Every 5 to 10 days the RAM consumption and CPU usage (due to kswapd)