similar to: can't authenticate from Windows 7/Pro machines

Forgot to install ntp. The clocks were out of sync so things failed. --------------------- I'm running Debian/Jessie in a fresh install after some severe system problems. The install went smoothly except for an issue with grub-pc acting up. Installing the version from sid cured that. I was still having a hardware issue so I swapped out the motherboard and put in a more modern one that

Could someone help me understand if what I'm seeing with share access is correct? On my samba domain I have two users (user1 and user2) and one share; the share has attribute "writelist = user1". On a linux machine I: mount the share with "mount -t cifs -o username=user1" successfully open a file in the share for writing with the perl "open" function

On Sat, Jul 4, 2015 at 6:36 PM, Gary Dale <garydale at torfree.net> wrote: They already have full rwx privileges. I'm not sure if that worked or not, > or if it was something else I've done since last night but currently the > profiles seem to being saved even without the share being connected. > getfacl: Removing leading '/' from absolute path names # file:

I've set up NT domains from scratch and things work. However, in this case I vampired the old settings over to my new Samba PDC from a W2K server which I then removed from the network. Everything almost works, except ... The main thing is that I can't seem to change the domain passwords from the XP Pro workstations. Normally you do Ctrl-Alt-Del and select change password, then fill

Hi folks, I have just installed a PCI SATA controller based on the SIL3112A chipset into my Centos-3 (latest kernel patches applied) system and moved an existing (not the boot disk) SATA drive from the onboard controller to the SIL-based one so I can setup software RAID with two 300GB drives. Kudzu/Linux found the controller and drives straight away and they've appeared as 'hda' and

Could you try giving domain users rwx control of profile folder this way: setfacl -m g:users:rwx On Jul 4, 2015 1:53 PM, "Gary Dale" <garydale at torfree.net> wrote: > On 04/07/15 04:22 AM, Rowland Penny wrote: > >> On 04/07/15 00:58, Gary Dale wrote: >> >>> On 03/07/15 01:21 PM, Rowland Penny wrote: >>> >>>> On 03/07/15 17:45, Gary

if you are to build a samba file server what hardware would you pick? does samba benifit from dual core, or dual processors or even quad? also does it benifit from memory? and how does it benifit from memory? more ram is better for samba? any ideas here? regards, Mazen -- _______________________________________________ Check out the latest SMS services @ http://www.linuxmail.org This allows you

I have added an HP Deskjet 600 to my debian etch system, using CUPS. It is working fine. I would like to set it up so that I can occassionally print to it from a Windows 9x machine. This is where I seem to be having trouble. I consulted the HOW-TO docs on the samba site, but they are quite detailed and confusing (for me). I don't want to do anything that will cause the printer to work

Hello, I do a Migration from NT4 to Samba + LDAP, I already join Samba to NT4, when I type net rpc vampire -S NT -U Administrator%nt, the following error occur, [2007/12/28 00:13:16, 0] rpc_client/cli_pipe.c:cli_rpc_pipe_open_schannel(2673) cli_rpc_pipe_open_schannel: failed to get schannel session key from server NT for domain SFA.[2007/12/28 00:13:16, 0]

Hi Gary, My environment is FreeBSD 5.4 , Samba 3.0.12 and the users are = authenticated by AD server(that is the "password server" points to this = server) It seems no "groupmap" command on freebsd, How I can solve this issue? Thanks! Liu -----=D3=CA=BC=FE=D4=AD=BC=FE----- =B7=A2=BC=FE=C8=CB: Gary Dale [mailto:garydale@torfree.net]=20 =B7=A2=CB=CD=CA=B1=BC=E4:

I could really use a quick yes/no answer here. If answer yes a pointer to a Howto. I have a samba based file server running in workgroup mode with security = user XP User authentication is managed by a separate LDAP server. Is there a way from within XP such as command utility, anything, I could use to update the samba server's password? RIght now, it a manual excerise to update the

Hi, I need your help! I want to realize samba usage below, but I don't know how to do it. samba server is redhat linux AS 4.0 up4 i386, samba version is samba-3.0.10-1.4E.9. When I create share and make all users and groups excepts valid users and groups not see this share name in network neighbor,I do not use the options ' browsable=no',because using it will let all valid users

it was mentioned that echo cancellation will not work if the playback and capture is done on 2 different soundcard. I would like to know whether this is true. I trying to use Speex Echo Cancellation on capture audio from a webcam mic with the playback through my onboard audio. Based on what is mentioned in the troubleshooting guide, does this mean that I would never be able to get the Echo

Back to square 1! I stripped out my unsuccessful attempts to get Samba working with LDAP on my Debian Sarge server and am back with a tdbsam backend. I actually tried to purge as much of the old Samba & LDAP as I could then reinstalled fresh. This included removing the Windows groups and users and even the old tdbsam data. Unfortunately, I'm back where I started - users can't

On Mon, Jan 10, 2011 at 12:08 PM, Rudi Ahlers <Rudi at softdux.com> wrote: > On Mon, Jan 10, 2011 at 11:49 AM, compdoc <compdoc at hotrodpc.com> wrote: >> I love realtek - the resources they use tend not to conflict with other >> cards or hardware, they don't use much cpu time, the drivers are mature, and >> they don't cost much. What could be better? There

There may be various "signing" parameters that you may need to set to "no"  on the samba PDC. I would also disable SMB3.   Windows 10 does support SMB3 but (in my experience) Samba does not properly implement it, so you will get problems.  Windows 7 does not support SMB3 so will fall back to SMB2 anyway. I suspect at this point making Windows 7 and Windows 3.11 interact

How configure samba from login in win station? -- Renan Brendler Geiss djnaner@gmail.com icq: 47856954 msn: the_darkspy@hotmail.com

One of my systems have two onboard NICs which uses the e100 and e1000 drivers (yes, the interfaces are not the same). This system kickstart fine with CentOS 3.x. I recently tried to rekick it with CentOS 4.x but was unsuccessful in doing so. When kicking CentOS 4.1, the interfaces are swapped around, i.e. eth0 becomes eth1 and eth1 becomes eth0 (as described at

Hello, I have an Lacie NAS disk attached to an Gigabit network. Since it only exports samba I mounted on one of my gigabit Linux boxes with smbmount //lacie/terabyte /TERABYTE -o defaults,username=genuser,password=genuser Now I need to export that to all my linux boxes not on the Gigabit network using nfs. When I try to mount I get: mount: old:/TERABYTE failed, reason given

I am running Samba4 on a Debian/Jessie AD DC. I have a network netlogon share with a single script in it. This .bat file is referenced in the ADUC profile and I can navigate to the netlogon share and run it, where it does what it is supposed to do. However when I log onto the workstation, it never executes. For example, it maps a drive but the drive is not mapped after a logon.