similar to: Unable to manage dns (ERR_DNS_ERROR_DS_UNAVAILABLE)

On 14/06/15 23:28, Peter Beck wrote: > what I've also recognized: > > on a pure Samba4 domain (2 domain controllers) there is the directory > /var/lib/private/samba/dns with a "sam.ldb" file and a subdirectory > "sam.ldb.d" containing all zones as ldb files: > > [root at unxads002 ~]# ls -lh /var/lib/samba/private/dns/sam.ldb.d/ > -rw-r----- 1 root

Dear All I have a question about the hypergeomteric distribution. Example 1: I have a universe of 6187 objects, and 164 have a particular attribute, therefore 6187-164 do not have that attribute. I sample 249 of those objects, and find that 19 have that attribute. I get a p-value here (looking at just over-representation): phyper(19, 164, 6187-164, 249, lower.tail=FALSE) [1] 7.816235e-06

Having just run the command "sip show channels" I get a list of channels even though there is no one on the phone (we only have 4 so it's easy to tell). Here is what I get: Peer User/ANR Call ID Seq (Tx/Rx) Format 192.168.0.22 (None) 4c81ac8e90c 00101/00000 UNKN 192.168.0.22 (None) 984ee48048d 00101/00000 UNKN 192.168.0.22

Hi, all: To recap: I can successfully get my WinXP box to join the domain (WHITEROCK), but after rebooting, when I try to log on: "The system cannot log you on now because the domain WHITEROCK is not available." I get this even when using the user 'root' - and this user was the one to successfully join the domain WHITEROCK!! To rule out any stale junk, my WinXP is a

I have a network which consists of two subnets, each with a linux server providing Samba services. With the configuration listed below, I have successfully achieved Subnet B being able to browse Subnet A but, Subnet A cannot browse Subnet B (sharename not found). Is it a Samba configuration issue or is it DNS? (I have it fixed if I put an /etc/lmhosts file on Linux Server A that has the host

Hi all hope you can help, I have a mixed XP / 2K client deployment, and the samba server is running as a PDC. On most machines I have no problems, but on 2 2K machines and 1 XP machine I'm getting the same behaviour every time I either try to write the file or execute a file, no matter whether I log on to the domain or which userid I log on as. I'm also running debian woody 2.4.19, and

Hello everyone, Assuming this is the right place to post potential bug reports, try this : (Apologies if it's been posted/covered somewhere else, but your lists don't seem to have a search facility...) nmbd had a good go at fork bombing my "server" just now, with a setup as follows : Samba 2.2.0a on Slackware Linux v8.0, linux kernel 2.4.16. i586 with 500ish mb of ram.

Mandi! Rowland penny via samba In chel di` si favelave... > > can i safely run 'samba-tool dbcheck --cross-ncs --fix'? > I do not see any reason why not. 1 error fixed, 7 remains: root at vdcsv1:~# samba-tool dbcheck --cross-ncs --fix Checking 4952 objects ERROR: no target object found for GUID component for msDS-NC-Replica-Locations in object

About a year and a half ago, someone answered a request on how to set up rsync so that the encryption was automatically setup (wish I knew more about the technical aspects). It has been in use for the time since then and it has been great. Now I have to replace the destination computer and setting up, what I call the encryption part, is the part I have forgotten how to do. This is the

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 G'day The attached patch adds "first draft" support for service location protocol, using OpenSLP (http://www.openslp.org). This allows you to automagically discover all the rsync servers on your network (which is defined in terms of your SLP configuration - typically equal to multicast scope, but you can change it around with

Hello. My problem is Rsync stops when I use it between 2 of my servers (2 NAS Synology) ( named "*.22*" and "*.6*" ). The problem continue... For example : _ Rsync run correctly between my server "*.22*" and ".6" ( in the 2 directions ) _ Rsync run correctly between my server ".6" and "*.8*" ( in the 2 directions ) _ Rsync *doesn't

Hello. My problem is Rsync stops when I use it between 2 of my servers (2 NAS Synology) ( named "*.22*" and "*.6*" ). For example : _ Rsync run correctly between my server "*.22*" and ".6" ( in the 2 directions ) _ Rsync run correctly between my server ".6" and "*.8*" ( in the 2 directions ) _ Rsync *doesn't run* correctly between my

samba-tool dbcheck --cross-ncs --fix Yes, should be possible, but i normaly do that after i do the following. search for : CN=58eba604-07e5-4c5d-a104-9e6f4907248f And CN=16b8c008-6c59-4b65-9f1b-530751904a75 In _msdc.dom.tld. Verify which GUID is removed, you can see that, then remove the old server GUID. Run : dig CNAME 58eba604-07e5-4c5d-a104-9e6f4907248f._msdcs.ad.fvg.lnf.it dig CNAME

Hi all! Im using samba 3.0.23c from debian backports and I finding some problems, this host has worked flawlessly since a a few months ago. But now stopped to work properly. My versions are: ii winbind 3.0.23c-1~bpo.1 service to resolve user and group information from Windows N ii samba 3.0.23c-1~bpo.1 a LanManager-like file and printer server for

Hi all, I am running Xen 3.0.2-2 (taken from XenSource) with Linux kernel 2.6.16 (taken from Debian Sid), I compiled Xen and 2 kernels (dom0 and domU). Here is the ascii-art of my setup: ------------ ------------- | LAN |------------------------| waste | 192.168.0.94/24 ------------ ------------- | ·····························

Hi, I'm trying to print to a printer that is connected to an NT 4 Server. The problem is, that nothing comes out of the printer, and I get no error messages, neither on the Linux nor the NT box. The printer queue on NT is empty. Where can I look in order to find out what the problem is? Here is a session with smbclient: dsadmin@linux:~ > smbclient //pc02/hp5pnt added interface

I''m trying to setup Shorewall 2.0.8 with the one-interface settings on my LFS (kernel 2.6.5) system. I''ve read the troubleshooting guide, recompiled my kernel with just about every netfilter/iptables module I could find, but I''m still getting this error: # tail /tmp/trace + prefix=Shorewall:smurfs:DROP: + ''['' 22 -gt 29 '']'' +

i have 2 asterisk servers one on CentOS and one on Fedora , i configured IAX trunking between the 2 servers so that i dial -say from a sip extension 2000 on fedora server to a sip extension 3000 on CentOS server the call seems to be established but hangup automatically after very short time and here is the iax2 set debug command result on centos server and also my iax.conf and extension.conf and

Todd Cary wrote: > Thanks to the encouragement of some people on this list, I am using > rsync to synchronize two servers: one is a backup to the other in case > the primary one fails. By hand, I inserted the names of the users on > the primary server into the backup server. So, now all works well. > > /usr/bin/rsync -av -e ssh /home/ 192.168.0.22:/home/ > > My question

To synchronize my server with the "standby" server, I run the following: rsync -a -e ssh /home/ 192.168.0.22:/home/ As expected, I am asked for a password from the destination computer. Is there a way to avoid that so I can make a crontab to run the rsync nightly? Todd -- Ariste Software 2200 D Street Ext Petaluma, CA 94952 (707) 773-4523