similar to: raid array device partition missing

Hello, i have a little problem. Our server has an broken RAID. # cat /proc/mdstat Personalities : [raid1] md0 : active raid1 sda1[2](F) sdb1[1] 2096064 blocks [2/1] [_U] md2 : active raid1 sda3[2](F) sdb3[1] 1462516672 blocks [2/1] [_U] md1 : active raid1 sda2[0] sdb2[1] 524224 blocks [2/2] [UU] unused devices: <none> I have remove the partition: # mdadm --remove

Somewhere, mdadm is cacheing information. Here is my /etc/mdadm.conf file: more /etc/mdadm.conf # mdadm.conf written out by anaconda DEVICE partitions MAILADDR root ARRAY /dev/md0 level=raid1 num-devices=4 metadata=0.90 UUID=55ff58b2:0abb5bad:42911890:5950dfce ARRAY /dev/md1 level=raid1 num-devices=2 metadata=0.90 UUID=315eaf5c:776c85bd:5fa8189c:68a99382 ARRAY /dev/md2 level=raid1 num-devices=2

Received the following message in mail to root: Message 257: >From root at desk4.localdomain Tue Oct 28 07:25:37 2014 Return-Path: <root at desk4.localdomain> X-Original-To: root Delivered-To: root at desk4.localdomain From: mdadm monitoring <root at desk4.localdomain> To: root at desk4.localdomain Subject: DegradedArray event on /dev/md0:desk4 Date: Tue, 28 Oct 2014 07:25:27

I am running software RAID1 on a somewhat critical server. Today I noticed one drive is giving errors. Good thing I had RAID. I planned on upgrading this server in next month or so. Just wandering if there was an easy way to fix this to avoid rushing the upgrade? Having a single drive is slowing down reads as well, I think. Thanks. Feb 7 15:28:28 server smartd[2980]: Device: /dev/sdb

Thanks for all the responses. A little more digging revealed: md0 is made up of two 250G disks on which the OS and a very large /var partions resides for a number of virtual machines. md1 is made up of two 2T disks on which /home resides. Challenge is that disk 0 of md0 is the problem and it has a 524M /boot partition outside of the raid partition. My plan is to back up /home (md1) and at a

hi all! back in Aug several of you assisted me in solving a problem where one of my drives had dropped out of (or been kicked out of) the raid1 array. something vaguely similar appears to have happened just a few mins ago, upon rebooting after a small update. I received four emails like this, one for /dev/md0, one for /dev/md1, one for /dev/md125 and one for /dev/md126: Subject: DegradedArray

Hello everyone. I'm trying to install CentOS 8 with root and swap partitions on software raid. The plan is: - create md0 raid level 1 with 2 hard drives: /dev/sda and /dev/sdb, using Linux Rscue CD, - install CentOS 8 with Virtual Box on my laptop, - rsync CentOS 8 root partition on /dev/md0p1, - chroot in CentOS 8 root partition, - configure /etc/mdadm.conf, grub.cfg, initramfs, install

Hello. A couple of years ago I installed two file-servers using kickstart. The server has two 1TB sata disks with two software raid1 partitions as follows: # cat /proc/mdstat Personalities : [raid1] md1 : active raid1 sdb4[1] sda4[0] 933448704 blocks [2/2] [UU] md0 : active raid1 sdb1[1] sda2[2](F) 40957568 blocks [2/1] [_U] Now the drives are starting to be failing and next week

Hi I have a Raid 1 centos 4.4 setup and now have this /proc/mdstat output: [root at server admin]# cat /proc/mdstat Personalities : [raid1] md2 : active raid1 hdc2[1] hda2[0] 1052160 blocks [2/2] [UU] md1 : active raid1 hda3[0] 77023552 blocks [2/1] [U_] md0 : active raid1 hdc1[1] hda1[0] 104320 blocks [2/2] [UU] What happens with md1 ? My dmesg output is: [root at

Hi. CENTOS 7.6.1810, fresh install - use this as a base to create/upgrade new/old machines. I was trying to setup two disks as a RAID1 array, using these lines mdadm --create --verbose /dev/md0 --level=0 --raid-devices=2 /dev/sdb1 /dev/sdc1 mdadm --create --verbose /dev/md1 --level=0 --raid-devices=2 /dev/sdb2 /dev/sdc2 mdadm --create --verbose /dev/md2 --level=0 --raid-devices=2

I have configured 2x 500G sata HDD as Software RAID1 with three partitions md0,md1 and md2 with md2 as 400+ gigs Now it is almost 36 hours the status is cat /proc/mdstat Personalities : [raid1] md0 : active raid1 hdb1[1] hda1[0] 104320 blocks [2/2] [UU] resync=DELAYED md1 : active raid1 hdb2[1] hda2[0] 4096448 blocks [2/2] [UU] resync=DELAYED md2 : active raid1

Hi all, This morning I received this notification from mdadm: This is an automatically generated mail message from mdadm running on server-mail.mydomain.kom A Fail event had been detected on md device /dev/md1. Faithfully yours, etc. In /proc/mdstat I see this: Personalities : [raid1] md1 : active raid1 sdb2[2](F) sda2[0] 77842880 blocks [2/1] [U_] md0 : active raid1 sdb1[1] sda1[0]

Hi list, I'm new with UEFI and GPT. For several years I've used MBR partition table. I've installed my system on software raid1 (mdadm) using md0(sda1,sdb1) for swap, md1(sda2, sdb2) for /, md2 (sda3,sdb3) for /home. From several how-to concerning raid1 installation, I must put each partition on a different md devices. I've asked times ago if it's more correct create the

Hello everybody, I'm looking for some insights on reproductible lockups with this server so please bear the long description that follows: Installed the 4.0 Centos than yum updated it so it results a 4.2 Centos fully updated. During the instalation and update there were no cold boots. That's important because if (updated Centos or not) you cold boot the server it stucks at the

Hi all, After rebooting my CentOS 5.5 server, i have the following message: ================================== Red Hat nash version 5.1.19.6 starting EXT3-fs: unable to read superblock mount: error mounting /dev/root on /sysroot as ext3: invalid argument setuproot: moving /root failed: No such file or directory setuproot: error mounting /proc: No such file or directory setuproot: error mounting

CentOS 6.3, x86_64. I have noticed when building a new software RAID-6 array on CentOS 6.3 that the mismatch_cnt grows monotonically while the array is building: # cat /proc/mdstat Personalities : [raid6] [raid5] [raid4] md11 : active raid6 sdg[5] sdf[4] sde[3] sdd[2] sdc[1] sdb[0] 3904890880 blocks super 1.2 level 6, 512k chunk, algorithm 2 [6/6] [UUUUUU]

I think I have solved my issue and would like some input from anyone who has done this for pitfalls, errors, or if I am just wrong. Centos 5.x, software raid, 250gb drives. 2 drives in mirror, one spare. All same size. 2 devices in the mirror, one boot (about 100MB), one that fills the rest of disk and contains LVM partitions. I was thinking of taking out the spare and adding a 500gb drive. I

I have a system that is RAID -1 configured as /dev/md0 is /dev/hda1 /dev/hdb1 /dev/md1 is /dev/hdb3 /dev/hdb3 it seems as though /dev/hda has failed.... I have another disk (identical model) that I can replace hda with. I know about the commands fdisk to repartion and raidhotadd /dev/md0 /dev/hda1 and raidhotadd /dev/md1 /dev/hda3 (to be ran after the system boots). BUT... how do I now get

Hello all, I have 2 x 250GB sata disks (sda and sdb). # fdisk -l /dev/sda Disk /dev/sda: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 14939 119997486 fd Linux raid autodetect /dev/sda2 14940 29878

Is there a reason why after a software raid install (from kickstart) that md1 is always unclean. md0 seems fine. boot screen says md1 is dirty and cat /proc/mdstat show md1 as being rebuilt. Any ideas? Jerry --------------- my kickstart -------------- echo "bootloader --location=mbr --driveorder=$HD1SHORT --append=\"rhgb quiet\" " >