similar to: Please help with configuration

Thanks Michael, I will proceed like this. I think I didn't have UDP 655 forwarded on the remote server, will do that (had it at my client's router). If tinc connects, will both server and client see each other, for example I will be able to access all webui's running on SERVER from CLIENT side? For example, SERVER is running webui of Tvheadend on 192.168.0.4:9981 How can I access that

Local IPs of the client are irrelevant. The client should be configured to look for the host by domain name (/etc/tinc/yournetwork/hosts/EXAMPLESERVER should have the dDNS name in the Address directive) and the tinc.conf file should have that as the host to connect to for the network. (ConnectTo=EXAMPLESERVER) Then, you need port forwarding in your router to forward TCP/UDP 655 from the WAN

Get it connected first and able to ping the remote server's IP. Then, you should be able to access stuff on the server network as if you were on that LAN. You should also remove the pet forwarding on the client side. It's unnecessary. Get Outlook for Android<https://aka.ms/ghei36> On Thu, Feb 7, 2019 at 12:49 PM -0500, "Drake Drake" <drakemails at

Hello Drake, I am doing the same... Spanish TV to my UK home, and UK TV to my Spanish home, using Kodi and TVHeadend!!It works really well, but find that I need powerful PCs running Kodi/PVR-HTS to prevent buffering. The Tinc VPN does not filter ports - all ports are available at each end. Since you're likely to be behind NAT this is safe. The port numbers 9981 and 9982 are only needed in the

Does anyone have an (overhead) paging system that they like that works with SIP? We've got a client with an old paging system that (supposedly) just takes an rj11 POTS connection, but when we put an SPA Cisco adapter on it, it doesn't auto-answer the call, so paging never happens. [cid:image001.png at 01D4DFF6.9C1F1AA0] Michael J. Munger, dCAP, MCPS, MCNPS, MBSS Microsoft Certified

*Problem I want to solve:* We have 3 sites: A, B, and C. Network admins should have access to all three. (this works as-is). Desktop support should only have access to their site. (Tech A to site A, Tech B to site B, Tech C to site C). *How I think I can do it:* Working with keys? Admin's public key will be on all the client machines, and thus, the client machines will always

Hi, We are deciding on to either entirely use HPH code to our OpenSSH or not for systems globally and I come down to a question. If HPH-SSH code is such an improvement to network performance for OpenSSH, then why has it not been incorporated to the OpenSSH code? Is there a reason? Is it because there are problems with the HPH-SSH code? Since the code has been out for a time and still has not

Four problems below: # dnf -y groupupdate "Core" "Minimal Install" bintray-tvheadend-stable 0.0? B/s |?? 0? B???? 00:00 Failed to synchronize cache for repo 'bintray-tvheadend-stable', ignoring this repo. Last metadata expiration check: 0:03:11 ago on Sat 16 May 2020 12:30:47 PM CDT. Error: ?Problem 1: package python3-hawkey-0.35.1-9.el8_1.x86_64 requires

Definitely considered that. Running different VPNs and even running different instances of the daemon on different ports. But, as you rightly pointed out: *additional complexity*. It basically comes down to: what if you have a bad actor who needs credentials revoked immediately? We have a way of doing this already, but it can take up to 5 minutes to cycle through every machine on the network -

You need more than an ATA. You need something with an FSO and FXO. I've used Linksys/SPA3102-3.3.6 and been happy with it. From: asterisk-users <asterisk-users-bounces at lists.digium.com> On Behalf Of Sebastian Nielsen Sent: Thursday, March 21, 2019 3:01 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' <asterisk-users at lists.digium.com> Subject: Re:

I have an AGI that can sometimes take time complete. I don't want the dialplan to be held up by the agi. Is there any way to call it and have Asterisk continue with the dialplan? -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20190410/4c704231/attachment.html>

lspci shows MSI enabled for PCI device. PCI passthrough works fine. However, as soon as the MSI driver for card is insmodded, kernel panics. This is on xen-unstable. Tried the same with xen-3.3.0 which is supposed to have MSI passthrough, but the same guest shows MSI as disabled. Any else seen this bug, or know of a workaround ? Trace is as follows : ------------[ cut here ]------------

Problem: I have four networks, A, B, C, and D Networks B, C, and D should not be able to see each other. Network A should be able to see all of them. A - 172.16.1.1/24 B - 172.16.2.1/24 C - 172.16.3.1/24 D - 172.16.0.1/24 For host machine X, which is at 172.16.1.100/24 (network A), I added a route for it to ping a machine (Y) on the network B:     ip route add 172.16.2.0/24 via

Is there any information available when one can expect OpenSolaris to handle PCI Passthrough als Dom0? This thread: http://opensolaris.org/jive/thread.jspa?threadID=45875&tstart=135 makes me think there might be some work going on... Thanks Ares

Hi I'm using R 2.0 in SuSE 9.2. When I plot data as a boxplot, the boxes appear on the plot in alphabetical order (of group) rather than the order in which they appear in the data. So far, the only thing I can do to fix this is to prefix the group labels with a,b,c...etc to trick R into plotting them in the right order. Can sorting be turned off? How should I address this sensibly? Thanks

From: Lukas Wunner <lukas at wunner.de> The integrated HDA controller on Nvidia GPUs can be hidden with a bit in the GPU's config space. Information about this scheme was provided by NVIDIA on their forums. Many laptops now ship with this device hidden, meaning that Linux users of affected platforms (where the HDMI connector comes off the NVIDIA GPU) cannot use HDMI audio

On 38+ Intel-based Asus products, the nvidia GPU becomes unusable after S3 suspend/resume. The affected products include multiple generations of nvidia GPUs and Intel SoCs. After resume, nouveau logs many errors such as: fifo: fault 00 [READ] at 0000005555555000 engine 00 [GR] client 04 [HUB/FE] reason 4a [] on channel -1 [007fa91000 unknown] DRM: failed to idle channel 0 [DRM]

Since quirk_nvidia_hda() was added there's now two nvidia device functions on any laptops with nvidia GPUs: the HDA controller, and the GPU itself. Unfortunately this has the sideaffect of breaking quirk_reset_lenovo_thinkpad_50_nvgpu() since pci_reset_function() was using pci_parent_bus_reset() to reset the GPU's respective PCI bus, and pci_parent_bus_reset() does not work on busses which

From: Lukas Wunner <lukas at wunner.de> The integrated HDA controller on Nvidia GPUs can be hidden with a bit in the GPU's config space. Information about this scheme was provided by NVIDIA on their forums. Many laptops now ship with this device hidden, meaning that Linux users of affected platforms (where the HDMI connector comes off the NVIDIA GPU) cannot use HDMI audio

https://bugs.freedesktop.org/show_bug.cgi?id=101322 Bug ID: 101322 Summary: GM108/NV118: 0 MiB DDR3 and boot crash in gf100_ltc_oneinit_tag_ram Product: xorg Version: unspecified Hardware: Other OS: All Status: NEW Severity: normal Priority: medium Component: